Here's the Kernel diary below. Any thoughts?
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000304] ps7-ttc #0 at f0006000, irq=43
[ 0.000618] Console: colour dummy device 80x30
[ 0.000656] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040205] pid_max: default: 32768 minimum: 301
[ 0.040430] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040453] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042634] CPU: Testing write buffer coherency: ok
[ 0.042994] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043057] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043281] L310 cache controller enabled
[ 0.043300] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121038] CPU1: Booted secondary processor
[ 0.210226] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210355] Brought up 2 CPUs
[ 0.210374] SMP: Total of 2 processors activated.
[ 0.210382] CPU: All CPU(s) started in SVC mode.
[ 0.211046] devtmpfs: initialized
[ 0.213478] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214713] regulator-dummy: no parameters
[ 0.223287] NET: Registered protocol family 16
[ 0.225612] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.227892] cpuidle: using governor ladder
[ 0.227906] cpuidle: using governor menu
[ 0.235361] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.236872] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.236885] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237003] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.258962] bio: create slab at 0
[ 0.261188] vgaarb: loaded
[ 0.261909] SCSI subsystem initialized
[ 0.262818] usbcore: registered new interface driver usbfs
[ 0.262998] usbcore: registered new interface driver hub
[ 0.263231] usbcore: registered new device driver usb
[ 0.263768] media: Linux media interface: v0.10
[ 0.263926] Linux video capture interface: v2.00
[ 0.264166] pps_core: LinuxPPS API ver. 1 registered
[ 0.264179] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.264310] PTP clock support registered
[ 0.264664] EDAC MC: Ver: 3.0.0
[ 0.265720] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268715] DMA-API: preallocated 4096 debug entries
[ 0.268729] DMA-API: debugging enabled by kernel config
[ 0.268818] Switched to clocksource arm_global_timer
[ 0.289280] NET: Registered protocol family 2
[ 0.289961] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.290058] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.290217] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.290288] TCP: reno registered
[ 0.290309] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.290369] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.290668] NET: Registered protocol family 1
[ 0.291056] RPC: Registered named UNIX socket transport module.
[ 0.291069] RPC: Registered udp transport module.
[ 0.291077] RPC: Registered tcp transport module.
[ 0.291086] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291099] PCI: CLS 0 bytes, default 64
[ 0.291583] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.293676] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.295096] bounce pool size: 64 pages
[ 0.296007] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
[ 0.296213] msgmni has been set to 1486
[ 0.297012] io scheduler noop registered
[ 0.297025] io scheduler deadline registered
[ 0.297069] io scheduler cfq registered (default)
[ 0.309733] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.309756] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.433070] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.006268] console [ttyPS0] enabled
[ 1.010596] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.018248] [drm] Initialized drm 1.1.0 20060810
[ 1.035288] brd: module loaded
[ 1.044758] loop: module loaded
[ 1.054475] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.060324] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.068091] libphy: XEMACPS mii bus: probed
[ 1.072494] ------------- phy_id = 0x3625e62
[ 1.077234] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.086075] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.092733] ehci-pci: EHCI PCI platform driver
[ 1.100254] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.107088] usbcore: registered new interface driver usb-storage
[ 1.114000] mousedev: PS/2 mouse device common for all mice
[ 1.120137] i2c /dev entries driver
[ 1.127034] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.132578] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.138462] Xilinx Zynq CpuIdle Driver started
[ 1.143373] sdhci: Secure Digital Host Controller Interface driver
[ 1.149496] sdhci: Copyright(c) Pierre Ossman
[ 1.153809] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.160685] mmc0: no vqmmc regulator found
[ 1.164698] mmc0: no vmmc regulator found
[ 1.208845] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.217530] usbcore: registered new interface driver usbhid
[ 1.223048] usbhid: USB HID core driver
[ 1.227762] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.234055] nand: Micron MT29F2G08ABAEAWP
[ 1.238025] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.243987] Bad block table found at page 131008, version 0x01
[ 1.250236] Bad block table found at page 130944, version 0x01
[ 1.256290] 3 ofpart partitions found on MTD device pl353-nand
[ 1.262058] Creating 3 MTD partitions on "pl353-nand":
[ 1.267159] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.275264] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.282574] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.291612] TCP: cubic registered
[ 1.294846] NET: Registered protocol family 17
[ 1.299578] Registering SWP/SWPB emulation handler
[ 1.305546] regulator-dummy: disabling
[ 1.310000] UBI: attaching mtd1 to ubi0
[ 1.835967] UBI: scanning is finished
[ 1.847664] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.854749] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.861511] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.868175] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.875053] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.881034] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.888141] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 862493722
[ 1.897097] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.906314] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.906320] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.910435] ALSA device list:
[ 1.910439] No soundcards found.
[ 1.926755] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.979013] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.984938] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.994084] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.003962] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.008997] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2A24A8E1-2021-4A54-8A4E-D8E294AE00E5, small LPT model
[ 2.020557] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.027521] devtmpfs: mounted
[ 2.030661] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.871138] random: dd urandom read with 0 bits of entropy available
[ 3.268861]
[ 3.268861] bcm54xx_config_init
[ 3.878856]
[ 3.878856] bcm54xx_config_init
[ 6.879683] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.885775] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 21.508697] In axi fpga driver!
[ 21.511813] request_mem_region OK!
[ 21.515164] AXI fpga dev virtual address is 0xf01fe000
[ 21.520306] *base_vir_addr = 0xc510
[ 21.535488] In fpga mem driver!
[ 21.538660] request_mem_region OK!
[ 21.542282] fpga mem virtual address is 0xf3000000
[ 22.338874]
[ 22.338874] bcm54xx_config_init
[ 22.968836]
[ 22.968836] bcm54xx_config_init
[ 25.969701] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 25.975719] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 990.410095] random: nonblocking pool is initialized
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=8000c510
miner ID : 80221c2e2c00885c
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
chain[3] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
Check chain[3] PIC fw version=0xff
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x12 0x20 0x12 0x10 0x11 0x41 0x21 0x21 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x11 0x11 0x11 0x27 0x01 0x31 0x02 0x42 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x21 0x11 0x11 0x10 0x10 0x24 0x11 0x10 0x41 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[2] ASIC[0] has core num=1
Chain[2] ASIC[1] has core num=1
Chain[2] ASIC[2] has core num=1
Chain[2] ASIC[3] has core num=2
Chain[2] ASIC[4] has core num=2
Chain[2] ASIC[6] has core num=1
Chain[2] ASIC[7] has core num=2
Chain[2] ASIC[8] has core num=1
Chain[2] ASIC[10] has core num=1
Chain[2] ASIC[11] has core num=1
Chain[2] ASIC[12] has core num=4
Chain[2] ASIC[13] has core num=1
Chain[2] ASIC[14] has core num=2
Chain[2] ASIC[15] has core num=1
Chain[2] ASIC[16] has core num=2
Chain[2] ASIC[17] has core num=1
Chain[3] read_freq_badcores : 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
chain[3] has no freq in PIC! Will use default freq=550 and jump over...
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
Chain[10] ASIC[0] has core num=1
Chain[10] ASIC[1] has core num=1
Chain[10] ASIC[2] has core num=1
Chain[10] ASIC[3] has core num=1
Chain[10] ASIC[4] has core num=1
Chain[10] ASIC[5] has core num=1
Chain[10] ASIC[6] has core num=2
Chain[10] ASIC[7] has core num=7
Chain[10] ASIC[9] has core num=1
Chain[10] ASIC[10] has core num=3
Chain[10] ASIC[11] has core num=1
Chain[10] ASIC[13] has core num=2
Chain[10] ASIC[14] has core num=4
Chain[10] ASIC[15] has core num=2
Chain[10] ASIC[16] has core num=1
Chain[10] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
Chain[11] ASIC[0] has core num=2
Chain[11] ASIC[1] has core num=1
Chain[11] ASIC[2] has core num=1
Chain[11] ASIC[3] has core num=1
Chain[11] ASIC[4] has core num=1
Chain[11] ASIC[5] has core num=1
Chain[11] ASIC[6] has core num=1
Chain[11] ASIC[8] has core num=1
Chain[11] ASIC[10] has core num=2
Chain[11] ASIC[11] has core num=4
Chain[11] ASIC[12] has core num=1
Chain[11] ASIC[13] has core num=1
Chain[11] ASIC[14] has core num=1
Chain[11] ASIC[16] has core num=4
Chain[11] ASIC[17] has core num=1
chain[12] has no freq in PIC! Will use default freq=550 and jump over...
chain[13] has no freq in PIC! Will use default freq=550 and jump over...
get PIC voltage=11 on chain[1], value=870
get PIC voltage=11 on chain[2], value=870
get PIC voltage=11 on chain[3], value=870
get PIC voltage=11 on chain[8], value=870
get PIC voltage=11 on chain[9], value=870
get PIC voltage=11 on chain[10], value=870
get PIC voltage=11 on chain[11], value=870
get PIC voltage=11 on chain[12], value=870
get PIC voltage=11 on chain[13], value=870
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: 1,0,0,0,0,0,36,28
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
chain[10] temp offset record: 1,0,0,0,0,0,36,28
chain[10] temp chip I2C addr=0x98
chain[10] has no middle temp, use special fix mode.
chain[12] temp offset record: 28,28,28,28,28,28,28,28
chain[12] temp chip I2C addr=0x98
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1390 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 24 23:19:16 EST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80221c2e2c00885c
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
Checking fans!get fan[5] speed=5760
get fan[2] speed=5880
get fan[5] speed=5760
get fan[2] speed=5880
get fan[5] speed=5760
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x12 0x20 0x12 0x10 0x11 0x41 0x21 0x21 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x11 0x11 0x11 0x27 0x01 0x31 0x02 0x42 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x21 0x11 0x11 0x10 0x10 0x24 0x11 0x10 0x41 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
chain[3] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
Check chain[3] PIC fw version=0xff
Chain[3] read_freq_badcores : 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] test patten OK temp=-1
Chain[J14] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
Chain[J3] will use voltage=930 [1] to open core
Chain[J4] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[3]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[3]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[3]!
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=11 value=870
Chain[J4] orignal chain_voltage_pic=1 value=930
Chain[J9] orignal chain_voltage_pic=1 value=930
Chain[J9] will use backup chain_voltage_pic=870 [11]
Chain[J9] get working chain_voltage_pic=11
Chain[J10] orignal chain_voltage_pic=1 value=930
Chain[J10] will use backup chain_voltage_pic=870 [11]
Chain[J10] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J14] orignal chain_voltage_pic=1 value=930
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 2 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 3 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 4 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 5 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 6 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 0 asic
Chain[J2] has core num in PIC
Chain[J3] has core num in PIC
Chain[J3] ASIC[0] has core num=1
Chain[J3] ASIC[1] has core num=1
Chain[J3] ASIC[2] has core num=1
Chain[J3] ASIC[3] has core num=2
Chain[J3] ASIC[4] has core num=2
Chain[J3] ASIC[6] has core num=1
Chain[J3] ASIC[7] has core num=2
Chain[J3] ASIC[8] has core num=1
Chain[J3] ASIC[10] has core num=1
Chain[J3] ASIC[11] has core num=1
Chain[J3] ASIC[12] has core num=4
Chain[J3] ASIC[13] has core num=1
Chain[J3] ASIC[14] has core num=2
Chain[J3] ASIC[15] has core num=1
Chain[J3] ASIC[16] has core num=2
Chain[J3] ASIC[17] has core num=1
Chain[J9] has core num in PIC
Chain[J10] has core num in PIC
Chain[J11] has core num in PIC
Chain[J11] ASIC[0] has core num=1
Chain[J11] ASIC[1] has core num=1
Chain[J11] ASIC[2] has core num=1
Chain[J11] ASIC[3] has core num=1
Chain[J11] ASIC[4] has core num=1
Chain[J11] ASIC[5] has core num=1
Chain[J11] ASIC[6] has core num=2
Chain[J11] ASIC[7] has core num=7
Chain[J11] ASIC[9] has core num=1
Chain[J11] ASIC[10] has core num=3
Chain[J11] ASIC[11] has core num=1
Chain[J11] ASIC[13] has core num=2
Chain[J11] ASIC[14] has core num=4
Chain[J11] ASIC[15] has core num=2
Chain[J11] ASIC[16] has core num=1
Chain[J11] ASIC[17] has core num=1
Chain[J12] has core num in PIC
Chain[J12] ASIC[0] has core num=2
Chain[J12] ASIC[1] has core num=1
Chain[J12] ASIC[2] has core num=1
Chain[J12] ASIC[3] has core num=1
Chain[J12] ASIC[4] has core num=1
Chain[J12] ASIC[5] has core num=1
Chain[J12] ASIC[6] has core num=1
Chain[J12] ASIC[8] has core num=1
Chain[J12] ASIC[10] has core num=2
Chain[J12] ASIC[11] has core num=4
Chain[J12] ASIC[12] has core num=1
Chain[J12] ASIC[13] has core num=1
Chain[J12] ASIC[14] has core num=1
Chain[J12] ASIC[16] has core num=4
Chain[J12] ASIC[17] has core num=1
miner total rate=7047GH/s fixed rate=7000GH/s
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:9 max freq=575
Chain:9 min freq=575
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:10 max freq=581
Chain:10 min freq=581
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
Miner fix freq ...
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:9 max freq=575
Chain:9 min freq=575
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:10 max freq=581
Chain:10 min freq=581
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
max freq = 581
set baud=1
Chain[J9] PIC temp offset=1,0,0,0,0,0,36,28
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J9] chip[0] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[0] local:25 remote:29 offset:26
Chain[J9] chip[0] get middle temp offset=26 typeID=55
Chain[J11] PIC temp offset=1,0,0,0,0,0,36,28
chain[10] temp chip I2C addr=0x98
chain[10] has no middle temp, use special fix mode.
Chain[J11] chip[0] use PIC middle temp offset=0 typeID=55
New offset Chain[10] chip[0] local:24 remote:29 offset:25
Chain[J11] chip[0] get middle temp offset=25 typeID=55
open core on chain[1] [8] [9]...
set voltage=870 on chain[1], the real voltage=870
Chain[J2] set working voltage=870 [11]
open core on chain[2] [10] [11]...
set voltage=870 on chain[2], the real voltage=870
Chain[J3] set working voltage=870 [11]
setStartTimePoint total_tv_start_sys=264 total_tv_end_sys=265
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[1]: (asic index start from 1-18)
Asic[01]=66.4880 Asic[02]=71.1180 Asic[03]=62.3600 Asic[04]=65.4310 Asic[05]=62.8130 Asic[06]=63.6860 Asic[07]=65.0950 Asic[08]=61.1520
Asic[09]=63.9880 Asic[10]=61.2530 Asic[11]=62.4950 Asic[12]=63.6350 Asic[13]=61.7730 Asic[14]=65.0110 Asic[15]=61.9910 Asic[16]=64.8940
Asic[17]=62.8300 Asic[18]=65.6660
get RT hashrate from Chain[2]: (asic index start from 1-18)
Asic[01]=66.8730 Asic[02]=63.8540 Asic[03]=59.7100 Asic[04]=68.7360 Asic[05]=61.6390 Asic[06]=61.9070 Asic[07]=67.2930 Asic[08]=68.4510
Asic[09]=63.4510 Asic[10]=67.1420 Asic[11]=61.7400 Asic[12]=66.1350 Asic[13]=67.6280 Asic[14]=64.4580 Asic[15]=61.9580 Asic[16]=65.8000
Asic[17]=61.5720 Asic[18]=60.6320
get RT hashrate from Chain[8]: (asic index start from 1-18)
Asic[01]=63.3840 Asic[02]=64.1050 Asic[03]=66.2860 Asic[04]=68.4340 Asic[05]=66.4040 Asic[06]=62.7800 Asic[07]=59.5590 Asic[08]=66.3200
Asic[09]=64.2230 Asic[10]=63.5850 Asic[11]=60.8500 Asic[12]=62.5950 Asic[13]=67.2590 Asic[14]=63.1820 Asic[15]=62.9810 Asic[16]=69.5240
Asic[17]=67.3260 Asic[18]=69.1550
get RT hashrate from Chain[9]: (asic index start from 1-18)
Asic[01]=69.6250 Asic[02]=63.3840 Asic[03]=62.2770 Asic[04]=63.3170 Asic[05]=65.9680 Asic[06]=63.9040 Asic[07]=65.5820 Asic[08]=59.1900
Asic[09]=66.2360 Asic[10]=67.1590 Asic[11]=62.3940 Asic[12]=68.4670 Asic[13]=69.0380 Asic[14]=62.8970 Asic[15]=65.8500 Asic[16]=63.7530
Asic[17]=68.1150 Asic[18]=67.5110
get RT hashrate from Chain[10]: (asic index start from 1-18)
Asic[01]=63.7030 Asic[02]=68.8030 Asic[03]=69.6250 Asic[04]=65.3800 Asic[05]=72.3930 Asic[06]=60.9180 Asic[07]=62.1590 Asic[08]=65.4470
Asic[09]=63.4680 Asic[10]=70.1950 Asic[11]=62.5620 Asic[12]=65.1620 Asic[13]=57.0590 Asic[14]=65.6320 Asic[15]=64.7930 Asic[16]=67.4610
Asic[17]=70.0110 Asic[18]=66.5380
get RT hashrate from Chain[11]: (asic index start from 1-18)
Asic[01]=68.8530 Asic[02]=67.3600 Asic[03]=65.8330 Asic[04]=63.8540 Asic[05]=61.1860 Asic[06]=63.0320 Asic[07]=62.8970 Asic[08]=65.2460
Asic[09]=63.3170 Asic[10]=64.7430 Asic[11]=67.0920 Asic[12]=64.6920 Asic[13]=67.3600 Asic[14]=68.7360 Asic[15]=63.8540 Asic[16]=66.2860
Asic[17]=62.8470 Asic[18]=64.8770
Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Check Chain[J3] ASIC RT error: (asic index start from 1-18)
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Check Chain[J11] ASIC RT error: (asic index start from 1-18)
Check Chain[J12] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
do read temp on Chain[8]
Chain[8] Chip[1] TempTypeID=55 middle offset=26
read failed, old value: Chain[8] Chip[1] local Temp=62
Chain[8] Chip[1] middle Temp=79
Special fix Chain[8] Chip[1] middle Temp = 77
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=55 middle offset=25
Chain[10] Chip[1] local Temp=55
Chain[10] Chip[1] middle Temp=73
Special fix Chain[10] Chip[1] middle Temp = 70
Done read temp on Chain[10]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=31410
