Topic: Antminer Test Fixture for S9 T9 (Read 403 times)

The list of files he sent me contains the tf files for the following miners

S15
T15
S9E
S9k
S11
S9j
T9+
T17
S17

I see no V9 here, and I doubt he has any, or else he would have sent it, I still won't be able to share any of those, but you can contact him via Whatsapp, telegram or any other means of communications if you visit this page https://www.zeusbtc.com/RepairDetails.asp?ID=56  you will find the following.



Click on one of the icons (he recommended WhatsApp) and then ask him for the files you need, if for whatever reason he doesn't respond, I will notify him about your message.

Sorry,  I couldn't help much.

thanks.

i want to test v9 hashboards with s9 t9 fixture........
i try
but tester not recocnized v9 hashboards....
maybe we must tf card file chang..

i try with t9 tf card file to test v9 hashboards and s9 tf cards file to test v9 hashboards.....

Should I change the file in the tf card for v9 miners?s
thank

---

thanks
my tester borads is v1.0  for s9 t9    not  s11 s15 s17
i will attached some best pic from my test fixture
Thanks for your honesty
I fully understand what you mean
What can I do now?
I have tester files for s9 t9 model
Now I need other files for v9 miner ,...........
Can I contact you through WhatsApp or by email?
Thanks again

OP, you failed to send me an image of the backside of the fixture tool, however, I think you have this tool https://www.zeusbtc.com/RepairDetails.asp?ID=56 which is meant for only (S9 T9+ S9k S9se) the one you need for the new models is this one https://www.zeusbtc.com/RepairDetails.asp?ID=128

The first image you sent was not clear enough, but I forwarded it to Kevin from zeusbtc (The guy who makes the repair videos on youtube) and he said that the color of the control board looks green in the image you sent, so it's most likely valid only for the S9 models because the S17/T17's control board is blackish, he also mentioned that even that one is not suitable for the E and + versions, only for the normal versions and the Pro.

Anyway, I still requested the files from him, so that you or anyone else can make use of them, the files are above 700mb in size, my upload speed is terrible nowadays, so I will need until tomorrow to upload them and share the download link.

The files will be uploaded the zipped as they came, I am not responsible for anything inside them, and they were sent to me directly by Kevin Chau of Zeusbtc, I know Chau for nearly two years now, I had a ton of financial dealings with him (he always went first) but he is highly trusted and well known in the miners' community in Telegram, so I tend to trust him a lot, but as I mentioned I have not INSPECTED the files, so make sure you do so yourself.

Edit:

Unfortunately i won't be able to share the files, he said I could use them, probably send them to people i personally i know, but when i mentioned posting the files on forum he said it is better if I don't, he said you or anyone else needs the files may contact him https://www.zeusbtc.com/Repair.asp , he said whatsapp is the fastest method for them, if for any reason they don't respond to you, do let me know and I will directly talk to Kevin to speed up the process for you. I am so sorry i couldn't publish the files.

Much better to check this link below from ZeusBTC

- https://www.zeusbtc.com/Repair.asp

Then scroll down and you will find guides including videos and software.

They also have Youtube Channel you can watch their videos from here zeusBTC Videos

What can I do to better understand the Hashboards Miner repairs?

---

thanks

I am not saying no tool can fix S11 - S17, I am saying your tool probably can't, what control board does it have?  show me a picture of the backside of the tool and I will most likely be able to provide you with the files you need.


Pretty sure they won't give him anything, he needs to get somewhere else, I think I can find them for him.

The test fixture for  s11 s15 s17... is currently unavailable to the public unlike s9 and t9+ TF card image.

But if you want to get those v1.2 test fixture for s11 s15 s17... you can get the copy from bitmain if you are one who completes the "Antminer repair training class"
You can read more from here https://support.bitmain.com/hc/en-us/articles/360018046113-Buying-Materials-Process

Hi
Thanks
The device also tests other Bitmine products
Like s11 s15 s17
Just change the file inside the tf card
Then it can be tested

This tool is exclusively designed for S9/T9, it is loaded with a firmware that keeps continously sending power signals to the chips so you can measure the voltage on each chip, the way it diagnoses the bad chip is simply by checking where the voltage stop (at which chip) and the follow of electricity within other hash boards is different from the S9.

Honestly you don't even need this tool, you can simply measure the resistence of each chip without turning it on, the one that has a different reading is the bad one, you can also test voltage while the board is booting up, you need to be a bit quick but it is manageable, also the reading on the firmware itself tells you alot, i noticed that if the miner shows 40 asics for example, 99% it will be chip 39/40/41, it is almost always the chip before it, next to it or the same stated chip.

Also notice that the normal values of each row of chips is different, i have the diagram for S9, for other models you can get them by reading them from a working hash board.

HELLO
 
i bought a Antminer Test Fixture for S9 T9+
 
i have tf card file for s9 t9 prducts

i need tf file for s11 s15 s17 ,...

can every one help me ??

http://uupload.ir/files/nenv_a1.jpg