ANTMINER U1 Hashrate on Raspberry Pi Wheezy

Localbtcbuyer

newbie

Activity: 56

Merit: 0

Quote from: miroman86 on February 11, 2014, 03:29:08 PM

Quote from: Localbtcbuyer on February 11, 2014, 03:00:22 PM

I use the same hubs. When I plug into either of the 2 "extra power" black ports, I either dont get the miner recognized, or it is slow. Keep that in mind, not sure why it happens

Thank you! Will keep this in mind... I bought 4 because I really didn't want to put in 6 miners in one hub, hopefully it works when I switch it around. I thought at least if I had 6 in one hub it wouldn't give me problems.

Have you tried connecting any USB 3.0 hubs into these Dlinks and make it work on Raspberry Pi?

I do not have a RaspPi, so no, I have not.

miroman86

full member

Activity: 126

Merit: 100

Quote from: Localbtcbuyer on February 11, 2014, 03:00:22 PM

I use the same hubs. When I plug into either of the 2 "extra power" black ports, I either dont get the miner recognized, or it is slow. Keep that in mind, not sure why it happens

Thank you! Will keep this in mind... I bought 4 because I really didn't want to put in 6 miners in one hub, hopefully it works when I switch it around. I thought at least if I had 6 in one hub it wouldn't give me problems.

Have you tried connecting any USB 3.0 hubs into these Dlinks and make it work on Raspberry Pi?

Localbtcbuyer

newbie

Activity: 56

Merit: 0

I use the same hubs. When I plug into either of the 2 "extra power" black ports, I either dont get the miner recognized, or it is slow. Keep that in mind, not sure why it happens

miroman86

full member

Activity: 126

Merit: 100

Quote from: byt411 on February 11, 2014, 02:04:17 PM

Unless I am mistaken, the third column is the total average hashrate for that device. The current hashrate is correct, it probably because you unplugged them and plugged them in, but left some time without them mining. Try restarting the miner, then all averages should be about the same.

Thanks! I will try this later when I get home. Most of the time when I restart it though, it doesnt detect one of the miners, it only detects 15... If I restart my Raspberry Pi, it detects them all... But it gives me those 3 low hashing ones.

miroman86

full member

Activity: 126

Merit: 100

Quote from: Localbtcbuyer on February 11, 2014, 02:02:35 PM

Probably not getting enough power to those miners. Try switching the low ones to a different usb port, and see if it is the actual port, or the miner itself.

I just got some new D-Link 7-port hubs, heard they're great for these USB ASIC miners... Even up to 6 miners on 1 hub (from the forums)... I currently have 2 hubs daisychained, total of 10 miners, and then the hub with 6 miners, I plugged directly to the RPI.

I ran them on a Mac before, but on the Anker USB3.0 9-Port+1chargingport hub... They ran kind of faster, but I wasn't able to tell since the interface on MacMiner is different, I didn't see any of those 3 columns of hashrates...

Power? or defective miner?

greenshot screen capture

byt411

hero member

Activity: 798

Merit: 1000

Unless I am mistaken, the third column is the total average hashrate for that device. The current hashrate is correct, it probably because you unplugged them and plugged them in, but left some time without them mining. Try restarting the miner, then all averages should be about the same.

Localbtcbuyer

newbie

Activity: 56

Merit: 0

Probably not getting enough power to those miners. Try switching the low ones to a different usb port, and see if it is the actual port, or the miner itself.

miroman86

full member

Activity: 126

Merit: 100

Some of my Antminers aren't giving out the same hash rate as the others... What do the three columns about my hashrate are? There are three columns, and if you can see, AMU3 AMU5 and AMU9 are really low on the 3rd columns... I'm using the latest BFGminer...

Why is it like this? Any fix?

free jpeg images

Topic: ANTMINER U1 Hashrate on Raspberry Pi Wheezy (Read 1910 times)