Antminer U3 problem >90% error | Bitcointalksearch.org

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: Starssadar on April 23, 2015, 08:01:29 AM

Quote from: Amph on April 20, 2015, 10:57:42 AM

first thing are you using the correct miner cgminer 4.9.0? command line should be like this cgminer.exe -o http://127.0.0.1:8332 -u fred -p password --au3-freq 225 --au3-volt 800 --btc-address

I'm using the last cgminer with minera. I don't really know where to check those command lines, I'm not really familiar with console commands and Pi stuff, just getting started here Shocked

I'm not using a USB hub, my U3 is directly plugged into the Pi. Is it a problem? Not enough amps?

command line should be in your bat file, and don't use minera is really bad, try the regular cgminer 4.9.0 for this mienrs

usb hub isn't needed if you don't have many usb to connect

Starssadar

newbie

Activity: 12

Merit: 0

Quote from: Amph on April 20, 2015, 10:57:42 AM

first thing are you using the correct miner cgminer 4.9.0? command line should be like this cgminer.exe -o http://127.0.0.1:8332 -u fred -p password --au3-freq 225 --au3-volt 800 --btc-address

I'm using the last cgminer with minera. I don't really know where to check those command lines, I'm not really familiar with console commands and Pi stuff, just getting started here Shocked

I'm not using a USB hub, my U3 is directly plugged into the Pi. Is it a problem? Not enough amps?

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: Starssadar on April 20, 2015, 08:50:39 AM

Ok, but what am I looking for?

As I said I'm very new to all this and it is a bit confusing. I thought it would be easier Roll Eyes

Are you using powered usb hub for the miner? If yes, you need get power for the powered hub from the same source as your pi.

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: Starssadar on April 20, 2015, 08:50:39 AM

Quote from: Amph on April 20, 2015, 05:04:30 AM

it can be for multiple things, like the software for mining, the usb as you said the pc/raspberry you are using, or defective unit

check first your command line(bat file or desktop shortcut), maybe it's not mining correctly

proceed with exclusion, it's the best method to find the problems

Ok, but what am I looking for?

As I said I'm very new to all this and it is a bit confusing. I thought it would be easier Roll Eyes

first thing are you using the correct miner cgminer 4.9.0? command line should be like this cgminer.exe -o http://127.0.0.1:8332 -u fred -p password --au3-freq 225 --au3-volt 800 --btc-address

Starssadar

newbie

Activity: 12

Merit: 0

Quote from: Amph on April 20, 2015, 05:04:30 AM

it can be for multiple things, like the software for mining, the usb as you said the pc/raspberry you are using, or defective unit

check first your command line(bat file or desktop shortcut), maybe it's not mining correctly

proceed with exclusion, it's the best method to find the problems

Ok, but what am I looking for?

As I said I'm very new to all this and it is a bit confusing. I thought it would be easier Roll Eyes

Amph

legendary

Activity: 3248

Merit: 1070

it can be for multiple things, like the software for mining, the usb as you said the pc/raspberry you are using, or defective unit

check first your command line(bat file or desktop shortcut), maybe it's not mining correctly

proceed with exclusion, it's the best method to find the problems

Starssadar

newbie

Activity: 12

Merit: 0

Hi

I finally managed to get my Antminer U3 working (I was trying to mine Scrypt based currency with it - silly me)
I got a Pi with Minera and my own USB cord.

I get >90% error rate and don't understand why. Is it from the power supply? From the USB cord? Undecided

What can affect error/rejected rate?

http://i62.tinypic.com/1192i3c.png

Topic: Antminer U3 problem >90% error (Read 997 times)