Bitcoin Forum>Alternate cryptocurrencies>Mining (Altcoins)
Author

Topic: Any experienced user for io.net ? (Read 71 times)

BitMaxz
legendary
Activity: 3472
Merit: 3217
Playbet.io - Crypto Casino and Sportsbook
Any experienced user for io.net ?
June 30, 2024, 04:34:52 PM
#2
Interesting project it seems you are planning to mine to get rewarded with the airdrop token I found it on Binance.
Anyway. I checked the documentation and it seems they have requirements before you can be hired according to their guide it seems you didn't meet the requirements that is why it doesn't work.

Look read the requirements below

Quote from: https://docs.io.net/docs/join-as-worker#prerequisites-or-requirements
Prerequisites or Requirements
Workers are central to our project, especially those with the highest share in the airdrop. Anyone who meets the minimum system requirements can become a worker. For smoother job access, it's recommended to have a download/upload speed of 200–500 Mbps, meet graphics card/processor requirements, and have 16GB of RAM to avoid crashes. But not meeting these doesn't disqualify you: uptime, GPU/CPU power, and internet speed also matter. So, even if you don't get a job, you can still earn airdrop rewards as a worker. Getting a job gives you an edge, though.

Minimum System Requirements:

12 GB RAM
256 GB SSD
Windows: NVIDIA GeForce RTX 30xx and above series / MacOS: Apple M1, M2, M3.
Internet Speed (please use speedtest.net or a similar service to check your speed)
To qualify for the airdrop, the minimum requirement is 100Mb/s download and 75Mb/s upload. However, for a higher chance of being hired, the recommended minimum requirements are:
Download: Above 500 Mb/s
Upload: Above 250 Mb/s
Ping: Below 30ms
igotek
hero member
Activity: 2170
Merit: 612
Online Security & Investment Corporation
Re: Any experienced user for io.net ?
June 30, 2024, 12:51:48 PM
#1
CONFIGURATION:
Code:
INTEL Core i9-10850K CPU
32GB 3200MHZ DDR4 RAM
Asus Z490 Prime Motherboard
240GB SSD
RTX3090 GPU is connected to the PCIE16x slot directly.

The installation and worker problem:

https://worker.io.net/worker/devices
I clicked "connect new worker" button. I selected Windows and GPU. I see device id and user id.

I started the HiveShell at HiveOS

INSALLATION:
Code:
sudo apt-get update -y
sudo apt-get install -y gnupg1
cd ~
wget https://raw.githubusercontent.com/ionet-official/io-net-official-setup-script/main/ionet-setup.sh
chmod +x ionet-setup.sh
./ionet-setup.sh
sudo reboot

I started the HiveShell. I used my personal user id and device id.

The Command for container:
Code:
docker run -d -v /var/run/docker.sock:/var/run/docker.sock -e DEVICE_NAME="New-device" -e DEVICE_ID=devidxxxxx -e USER_ID=useridxxxxx -e OPERATING_SYSTEM="Windows" -e USEGPUS=true --pull always ionetcontainers/io-launch:v0.1

I clicked "connect device" button at the web site.

The containers are active for 20 minutes.
IMAGE:


But nothing detected at the web. What am I missing ?
I also tried on Windows 10. The containers are active on Windows 10. but the web site not see anything.
Bitcoin Forum>Alternate cryptocurrencies>Mining (Altcoins)
Jump to: