Topic: any thoughts on these builds (Read 95 times)
Always have a couple extra risers on hand. They are usually they are the first thing you should try and swap out if you have a problem with the rig. Other than that and what others have said it looks good.
As listed on the motherboard specifications:
http://www.biostar-usa.com/app/en-us/mb/introduction.php?S_ID=884#specification
You need to use 2100 MHz if using a Celeron/Pentium processor, preferably one listed on the motherboard QVL or change the CPU to a 7th gen i3-i7 that supports 2400 MHz memory.
http://www.biostar-usa.com/app/en-us/mb/introduction.php?S_ID=884#specification
Quote
* DDR4 2400 for 7th Generation Intel® Core™ Processor Family
You need to use 2100 MHz if using a Celeron/Pentium processor, preferably one listed on the motherboard QVL or change the CPU to a 7th gen i3-i7 that supports 2400 MHz memory.
You will need 2133 RAM with that processor. 2400 won't work.
Memory capable of higher frequencies is fine. It will simply be bottlenecked to whatever the CPU/motherboard is capable of supporting.
ok so i dont need to change memory? is 2400MHz max and can be underclock to 2133? it is ok i can still change my memory if it is not proper one.
You will need 2133 RAM with that processor. 2400 won't work.
Memory capable of higher frequencies is fine. It will simply be bottlenecked to whatever the CPU/motherboard is capable of supporting.
You won't need 8 GB of RAM, 4GB will do just fine.
Get some more risers as risers will be the only issue 90% of the time, so keeping some in spare will save you a lot of time.
Get some more risers as risers will be the only issue 90% of the time, so keeping some in spare will save you a lot of time.
You will need 2133 RAM with that processor. 2400 won't work.
Hey mining brothers, i am new one here ( bet you hear this a lot those days) 
take a look at my builds and place any idea what you think.. some of the parts are arrived and some f the parts will be here in max 5 days.. and not totally noob
RIG n1
motherboard: biostar TB250-BTC+ https://www.amazon.com/BIOSTAR-TB250-BTC-SUPPORT-LGA1151-Intel/dp/B07481N9LW this one
CPU: intel Celeron G3930 2.9 GHz
RAM: 2x Kingston HyperX FURY 4GB 2400MHz DDR4
PSU: 2x EVGA SuperNOVA 850 P2, 80+ PLATINUM 850W with dual psu cable off course
GPU: 6X ASUS ROG-STRIX-GTX1080 TI
Power riser ver 007 with 4 capacitor x6
Kingston 120GB SSD
RIG n2
on this RIG same parts but different gpu
GPU 8x GIGABYTE Radeon RX 580 8GB only this vendor available that i have found
HAPPY MINING!!!!!!
take a look at my builds and place any idea what you think.. some of the parts are arrived and some f the parts will be here in max 5 days.. and not totally noob RIG n1
motherboard: biostar TB250-BTC+ https://www.amazon.com/BIOSTAR-TB250-BTC-SUPPORT-LGA1151-Intel/dp/B07481N9LW this one
CPU: intel Celeron G3930 2.9 GHz
RAM: 2x Kingston HyperX FURY 4GB 2400MHz DDR4
PSU: 2x EVGA SuperNOVA 850 P2, 80+ PLATINUM 850W with dual psu cable off course
GPU: 6X ASUS ROG-STRIX-GTX1080 TI
Power riser ver 007 with 4 capacitor x6
Kingston 120GB SSD
RIG n2
on this RIG same parts but different gpu
GPU 8x GIGABYTE Radeon RX 580 8GB only this vendor available that i have found
HAPPY MINING!!!!!!
Jump to: