Sorry for causing confusion, I tried to be detailed ended up making things a bit hard to understand, but you kind of got it anyways, to put this in even a simpler form, just plug the second PSU into an outlet, take 3*6pin cables and plug them in the 3rd board which now is unplugged.
You could also connect the control board to the second PSU instead of connecting it to the first one since the second PSU will have a lot more room, the control board doesn't consume much but still worth it IMO.
Topic: Anyone willing to help a newbie? I can't get my S9 working (Read 168 times)
Correct. The key point is that you should NEVER connect more than 1 PSU to a hash board. The power supplies will fight each other and eventually 1 will fail or worse yet you may burn the PCIe connectors.
Sorry - clarification: do you mean that all three hashboards must run off 1 psu, or that each hashboard separately must have at least one PSU? (meaning, I can't use two PSUs on a single board, which is what I think you meant...)
I guess from a simpler standpoint: I have two boards functioning now. If I get a second PSU and connect it to the third board via a separate outlet, that could power the third board and get all three hashing without needing a 220v outlet, correct?
I guess from a simpler standpoint: I have two boards functioning now. If I get a second PSU and connect it to the third board via a separate outlet, that could power the third board and get all three hashing without needing a 220v outlet, correct?
I have considered getting a apw7 unit, but I cannot determine if that would fix the issue or not, I currently think not.
The APW7 puts a decent 1.8KW at 230-240v, so the max you can achieve on a 110v would be under the 900w mark which is not enough to run 3 hashboards at least not on the default settings.
Quote
Is there any option to running the third board off of a second PSU from another outlet?
I don't see why not, as long as every hashboard is connected to just one PSU, so every 3 6pin going into a hashboards are from the same power source, and I assume you will need to power the PSU that does not power the control board first.
Philipma - that fixed it! Thank you so much.
Is there any way to run all three boards from a standard US 110V outlet? I feel like if I'm only getting 9 TH I should have bought a cheaper unit... Is there any use to getting an apw7 psu?
I think I spoke too soon... I mine for about 2-3 minutes, then the miner gets an error. There is a solid red fault light, which isn't covered in troubleshooting on bitmain's website that I can find. Rebooting doesn't seem to help.
Here is the kernel:
Seems to me it may be a network connection issue. I am currently using a powerline extender as no ethernet ports in the garage - so if that is the cause I can try using a wifi to ethernet adapter.
So the network connection was the issue, hardwiring off the powerline extension has solved it and I'm currently running at 30 minutes without a failure. Thanks!
Can someone give me help on the PSU situation? I would prefer to get all three hashboards working but not sure that is an option off of a single 110V US outlet.
I have considered getting a apw7 unit, but I cannot determine if that would fix the issue or not, I currently think not. Is there any option to running the third board off of a second PSU from another outlet? I'm not finding much instruction online about this so would appreciate if anyone could chime in.
Is there any way to run all three boards from a standard US 110V outlet? I feel like if I'm only getting 9 TH I should have bought a cheaper unit... Is there any use to getting an apw7 psu?
I think I spoke too soon... I mine for about 2-3 minutes, then the miner gets an error. There is a solid red fault light, which isn't covered in troubleshooting on bitmain's website that I can find. Rebooting doesn't seem to help.
Here is the kernel:
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000291] ps7-ttc #0 at df804000, irq=43
[ 0.000595] Console: colour dummy device 80x30
[ 0.000625] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.100243] pid_max: default: 32768 minimum: 301
[ 0.100449] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.100470] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.102631] CPU: Testing write buffer coherency: ok
[ 0.102941] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.102998] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.103218] L310 cache controller enabled
[ 0.103238] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.180987] CPU1: Booted secondary processor
[ 0.270220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.270348] Brought up 2 CPUs
[ 0.270367] SMP: Total of 2 processors activated.
[ 0.270375] CPU: All CPU(s) started in SVC mode.
[ 0.271032] devtmpfs: initialized
[ 0.273457] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.274641] regulator-dummy: no parameters
[ 0.281511] NET: Registered protocol family 16
[ 0.283669] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.285930] cpuidle: using governor ladder
[ 0.285944] cpuidle: using governor menu
[ 0.293314] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.294829] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.294842] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.294954] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.316363] bio: create slab at 0
[ 0.317744] vgaarb: loaded
[ 0.318431] SCSI subsystem initialized
[ 0.319308] usbcore: registered new interface driver usbfs
[ 0.319485] usbcore: registered new interface driver hub
[ 0.319703] usbcore: registered new device driver usb
[ 0.320379] media: Linux media interface: v0.10
[ 0.320542] Linux video capture interface: v2.00
[ 0.320780] pps_core: LinuxPPS API ver. 1 registered
[ 0.320792] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.320919] PTP clock support registered
[ 0.321442] EDAC MC: Ver: 3.0.0
[ 0.322612] Advanced Linux Sound Architecture Driver Initialized.
[ 0.325340] DMA-API: preallocated 4096 debug entries
[ 0.325354] DMA-API: debugging enabled by kernel config
[ 0.325424] Switched to clocksource arm_global_timer
[ 0.346084] NET: Registered protocol family 2
[ 0.346728] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.346785] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.346870] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.346911] TCP: reno registered
[ 0.346927] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.346958] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.347188] NET: Registered protocol family 1
[ 0.347517] RPC: Registered named UNIX socket transport module.
[ 0.347529] RPC: Registered udp transport module.
[ 0.347538] RPC: Registered tcp transport module.
[ 0.347546] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.347558] PCI: CLS 0 bytes, default 64
[ 0.347979] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.349946] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.351977] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.352173] msgmni has been set to 967
[ 0.352921] io scheduler noop registered
[ 0.352934] io scheduler deadline registered
[ 0.352991] io scheduler cfq registered (default)
[ 0.365026] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.365047] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.487853] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.055202] console [ttyPS0] enabled
[ 1.059457] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.067081] [drm] Initialized drm 1.1.0 20060810
[ 1.084026] brd: module loaded
[ 1.093374] loop: module loaded
[ 1.102763] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.108739] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.116731] libphy: XEMACPS mii bus: probed
[ 1.121102] ------------- phy_id = 0x3625e62
[ 1.125996] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.134612] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.141254] ehci-pci: EHCI PCI platform driver
[ 1.148555] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.155338] usbcore: registered new interface driver usb-storage
[ 1.162195] mousedev: PS/2 mouse device common for all mice
[ 1.168317] i2c /dev entries driver
[ 1.175219] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.180751] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.186661] Xilinx Zynq CpuIdle Driver started
[ 1.191505] sdhci: Secure Digital Host Controller Interface driver
[ 1.197641] sdhci: Copyright(c) Pierre Ossman
[ 1.201938] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.208800] mmc0: no vqmmc regulator found
[ 1.212817] mmc0: no vmmc regulator found
[ 1.255449] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.264123] usbcore: registered new interface driver usbhid
[ 1.269637] usbhid: USB HID core driver
[ 1.274321] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.280613] nand: Micron MT29F2G08ABAEAWP
[ 1.284584] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.290535] Bad block table found at page 131008, version 0x01
[ 1.296778] Bad block table found at page 130944, version 0x01
[ 1.302825] 3 ofpart partitions found on MTD device pl353-nand
[ 1.308598] Creating 3 MTD partitions on "pl353-nand":
[ 1.313704] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.321778] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.329097] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.339825] TCP: cubic registered
[ 1.343061] NET: Registered protocol family 17
[ 1.347766] Registering SWP/SWPB emulation handler
[ 1.353632] regulator-dummy: disabling
[ 1.357941] UBI: attaching mtd1 to ubi0
[ 1.882330] UBI: scanning is finished
[ 1.893934] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.901011] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.907773] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.914438] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.921316] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.927297] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.934404] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1754858191
[ 1.943447] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.952662] UBI: background thread "ubi_bgt0d" started, PID 1084
[ 1.952667] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.956621] ALSA device list:
[ 1.956625] No soundcards found.
[ 1.972938] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[ 2.001877] UBIFS: recovery needed
[ 2.147206] UBIFS: recovery completed
[ 2.150876] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.156826] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.165927] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.175815] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.180845] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7024E062-5923-42D9-8915-DFE72B38FE49, small LPT model
[ 2.192127] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.199318] devtmpfs: mounted
[ 2.202421] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 3.037219] random: dd urandom read with 1 bits of entropy available
[ 3.425471]
[ 3.425471] bcm54xx_config_init
[ 4.485480]
[ 4.485480] bcm54xx_config_init
[ 8.486290] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 8.492395] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 23.258539] In axi fpga driver!
[ 23.261607] request_mem_region OK!
[ 23.264996] AXI fpga dev virtual address is 0xdf9fe000
[ 23.270132] *base_vir_addr = 0xc51e
[ 23.284628] In fpga mem driver!
[ 23.288057] request_mem_region OK!
[ 23.291557] fpga mem virtual address is 0xe2000000
[ 24.095469]
[ 24.095469] bcm54xx_config_init
[ 25.185466]
[ 25.185466] bcm54xx_config_init
[ 29.186269] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 29.192373] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 385.145432] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram: 507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f94000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d8d000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912
main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8124a44979904814
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[9] has core num=2
main.c:9113: Chain[5] ASIC[24] has core num=1
main.c:9113: Chain[5] ASIC[42] has core num=3
main.c:9113: Chain[5] ASIC[46] has core num=1
main.c:9113: Chain[5] ASIC[54] has core num=1
main.c:9113: Chain[5] ASIC[59] has core num=1
main.c:9113: Chain[5] ASIC[62] has core num=1
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[57] has core num=2
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=142 on chain[5], value=860
main.c:9183: get PIC voltage=6 on chain[6], value=940
main.c:9183: get PIC voltage=142 on chain[7], value=860
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1830 root 0:00 grep bmminer
main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:17:30 CST 2019 type: Antminer S9j
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 8124a44979904814
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4920
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4920
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4920
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4920
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x04 0x4e 0x0e 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=860
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x04 0x4e 0x0e 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=860
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x04 0x4e 0x0e 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=860
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=142 value=860
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=860 [142]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=142
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=142 value=860
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 63 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[9] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[24] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[42] has core num=3
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[46] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[54] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[59] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[62] has core num=1
driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[57] has core num=2
driver-btm-c5.c:4571:set_frequency: miner total rate=9687GH/s ideal_total_hash_rate = 9500GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=675
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=675
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=675
driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=675
driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=675
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=675
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=675
driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=675
driver-btm-c5.c:5119:set_frequency: max freq = 675
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 9687, fixed_totalRate = 9500
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:15 remote:17 offset:27
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[8] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[8] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[8] chip[244] local:15 remote:16 offset:28
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J8] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 870
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 870
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 860
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 860
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=170 total_tv_end_sys=171
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 32
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 9345.846522, ideal hash rate = 9500
driver-btm-c5.c:10387:check_system_work: hash rate is low...
driver-btm-c5.c:15630:re_open_core: re_open_core enter
driver-btm-c5.c:15791:re_open_core: Chain[J6] has 63 asic
driver-btm-c5.c:15791:re_open_core: Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 0, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 1, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 2, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 3, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 4, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 5, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 6, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 7, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 8, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 9, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 10, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 11, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 12, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 13, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 14, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 15, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 16, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 17, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 18, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 19, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15791:re_open_core: Chain[J8] has 63 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[9] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[24] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[42] has core num=3
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[46] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[54] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[59] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[62] has core num=1
driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[57] has core num=2
driver-btm-c5.c:4571:set_frequency: miner total rate=9501GH/s ideal_total_hash_rate = 9500GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=675
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=668
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=662
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=675
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=662
driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=656
driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=675
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=668
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=662
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=675
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=662
driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=656
driver-btm-c5.c:5119:set_frequency: max freq = 668
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 9501, fixed_totalRate = 9500
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:16 remote:17 offset:28
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[8] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[8] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[8] chip[244] local:15 remote:16 offset:28
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J8] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:16082:re_open_core: reopen core end
driver-btm-c5.c:10400:check_system_work: re-open core 1 times
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 870
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 870
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 860
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 860
driver-btm-c5.c:10487:check_system_work: voltage_check_done
Fatal Error: network connection lost!
max pcb temperature:52, fan num:2, error counter:1
Fatal Error: network connection lost!
max pcb temperature:52, fan num:2, error counter:2
driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
driver-btm-c5.c:10427:check_system_work: checking hash again
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 9204.112391, ideal hash rate = 9500
Fatal Error: network connection lost!
max pcb temperature:53, fan num:2, error counter:3
driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
Fatal Error: network connection lost!
max pcb temperature:53, fan num:2, error counter:4
driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 9236.689022, ideal hash rate = 9500
driver-btm-c5.c:10387:check_system_work: hash rate is low...
driver-btm-c5.c:15630:re_open_core: re_open_core enter
driver-btm-c5.c:15791:re_open_core: Chain[J6] has 63 asic
driver-btm-c5.c:15791:re_open_core: Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 0, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 1, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 2, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 3, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 4, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 5, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 6, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 7, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 8, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 9, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 10, dev->chain_asic_num[i] = 0
do read_temp_func once...
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=75.6140 Asic[02]=76.8220 Asic[03]=74.4740 Asic[04]=71.4030 Asic[05]=73.8360 Asic[06]=72.3600 Asic[07]=76.1180 Asic[08]=78.3320
Asic[09]=76.0000 Asic[10]=71.8900 Asic[11]=80.1110 Asic[12]=72.8460 Asic[13]=68.5680 Asic[14]=70.3130 Asic[15]=75.0940 Asic[16]=74.8590
Asic[17]=79.4730 Asic[18]=73.7350 Asic[19]=80.0600 Asic[20]=74.2390 Asic[21]=73.8190 Asic[22]=76.0670 Asic[23]=77.1580 Asic[24]=74.7420
Asic[25]=75.4130 Asic[26]=74.8590 Asic[27]=75.4800 Asic[28]=74.6080 Asic[29]=76.0670 Asic[30]=77.7280 Asic[31]=72.0240 Asic[32]=76.1680
Asic[33]=74.9770 Asic[34]=78.0640 Asic[35]=75.4300 Asic[36]=77.8120 Asic[37]=78.2150 Asic[38]=77.1580 Asic[39]=75.1780 Asic[40]=75.9160
Asic[41]=72.8800 Asic[42]=74.4900 Asic[43]=81.0670 Asic[44]=75.2620 Asic[45]=80.3790 Asic[46]=76.2350 Asic[47]=76.4360 Asic[48]=72.0070
Asic[49]=73.0140 Asic[50]=76.4700 Asic[51]=76.3190 Asic[52]=79.0200 Asic[53]=81.0670 Asic[54]=71.8730 Asic[55]=76.9900 Asic[56]=78.9030
Asic[57]=77.0570 Asic[58]=75.9160 Asic[59]=77.5940 Asic[60]=76.1180 Asic[61]=69.5580 Asic[62]=75.4470 Asic[63]=81.0500
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=80.4970 Asic[02]=73.1480 Asic[03]=76.9730 Asic[04]=70.4300 Asic[05]=72.8290 Asic[06]=80.9660 Asic[07]=77.0570 Asic[08]=77.0740
Asic[09]=77.6950 Asic[10]=68.1320 Asic[11]=73.6680 Asic[12]=79.0030 Asic[13]=76.6550 Asic[14]=77.0910 Asic[15]=79.2220 Asic[16]=78.5840
Asic[17]=71.1350 Asic[18]=75.0780 Asic[19]=70.8830 Asic[20]=74.9600 Asic[21]=75.8160 Asic[22]=72.2420 Asic[23]=72.0910 Asic[24]=81.3190
Asic[25]=81.6370 Asic[26]=75.5980 Asic[27]=74.0370 Asic[28]=79.1880 Asic[29]=74.3060 Asic[30]=75.5980 Asic[31]=76.4530 Asic[32]=73.6680
Asic[33]=78.7350 Asic[34]=79.9090 Asic[35]=81.5540 Asic[36]=75.8160 Asic[37]=79.6580 Asic[38]=71.7050 Asic[39]=73.8860 Asic[40]=69.4740
Asic[41]=73.0640 Asic[42]=76.1680 Asic[43]=70.4640 Asic[44]=72.0740 Asic[45]=78.5170 Asic[46]=75.4130 Asic[47]=80.7820 Asic[48]=82.9130
Asic[49]=77.1750 Asic[50]=72.4440 Asic[51]=77.0570 Asic[52]=78.2480 Asic[53]=73.9530 Asic[54]=75.6820 Asic[55]=73.1310 Asic[56]=68.2320
Asic[57]=78.3660 Asic[58]=69.5080 Asic[59]=73.9370 Asic[60]=80.3120 Asic[61]=80.0440 Asic[62]=75.6650 Asic[63]=81.0840
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=53
Chain[5] Chip[62] junction temperature=58
Special fix Chain[5] Chip[62] middle Temp = 68
Done read temp on Chain[5]
Chain[7] Chip[244] pcb temperature=51
Chain[7] Chip[62] junction temperature=57
Special fix Chain[7] Chip[62] middle Temp = 66
Done read temp on Chain[7]
Max pcb temp : 53
set FAN speed according to: temp_highest=53 temp_top1[PWM_T]=53 temp_top1[TEMP_POS_LOCAL]=53 temp_change=0 fix_fan_steps=0
FAN PWM: 56
read_temp_func Done!
CRC error counter=0
[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000291] ps7-ttc #0 at df804000, irq=43
[ 0.000595] Console: colour dummy device 80x30
[ 0.000625] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.100243] pid_max: default: 32768 minimum: 301
[ 0.100449] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.100470] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.102631] CPU: Testing write buffer coherency: ok
[ 0.102941] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.102998] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.103218] L310 cache controller enabled
[ 0.103238] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.180987] CPU1: Booted secondary processor
[ 0.270220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.270348] Brought up 2 CPUs
[ 0.270367] SMP: Total of 2 processors activated.
[ 0.270375] CPU: All CPU(s) started in SVC mode.
[ 0.271032] devtmpfs: initialized
[ 0.273457] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.274641] regulator-dummy: no parameters
[ 0.281511] NET: Registered protocol family 16
[ 0.283669] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.285930] cpuidle: using governor ladder
[ 0.285944] cpuidle: using governor menu
[ 0.293314] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.294829] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.294842] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.294954] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.316363] bio: create slab
[ 0.317744] vgaarb: loaded
[ 0.318431] SCSI subsystem initialized
[ 0.319308] usbcore: registered new interface driver usbfs
[ 0.319485] usbcore: registered new interface driver hub
[ 0.319703] usbcore: registered new device driver usb
[ 0.320379] media: Linux media interface: v0.10
[ 0.320542] Linux video capture interface: v2.00
[ 0.320780] pps_core: LinuxPPS API ver. 1 registered
[ 0.320792] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.320919] PTP clock support registered
[ 0.321442] EDAC MC: Ver: 3.0.0
[ 0.322612] Advanced Linux Sound Architecture Driver Initialized.
[ 0.325340] DMA-API: preallocated 4096 debug entries
[ 0.325354] DMA-API: debugging enabled by kernel config
[ 0.325424] Switched to clocksource arm_global_timer
[ 0.346084] NET: Registered protocol family 2
[ 0.346728] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.346785] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.346870] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.346911] TCP: reno registered
[ 0.346927] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.346958] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.347188] NET: Registered protocol family 1
[ 0.347517] RPC: Registered named UNIX socket transport module.
[ 0.347529] RPC: Registered udp transport module.
[ 0.347538] RPC: Registered tcp transport module.
[ 0.347546] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.347558] PCI: CLS 0 bytes, default 64
[ 0.347979] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.349946] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.351977] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.352173] msgmni has been set to 967
[ 0.352921] io scheduler noop registered
[ 0.352934] io scheduler deadline registered
[ 0.352991] io scheduler cfq registered (default)
[ 0.365026] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.365047] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.487853] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.055202] console [ttyPS0] enabled
[ 1.059457] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.067081] [drm] Initialized drm 1.1.0 20060810
[ 1.084026] brd: module loaded
[ 1.093374] loop: module loaded
[ 1.102763] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.108739] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.116731] libphy: XEMACPS mii bus: probed
[ 1.121102] ------------- phy_id = 0x3625e62
[ 1.125996] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.134612] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.141254] ehci-pci: EHCI PCI platform driver
[ 1.148555] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.155338] usbcore: registered new interface driver usb-storage
[ 1.162195] mousedev: PS/2 mouse device common for all mice
[ 1.168317] i2c /dev entries driver
[ 1.175219] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.180751] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.186661] Xilinx Zynq CpuIdle Driver started
[ 1.191505] sdhci: Secure Digital Host Controller Interface driver
[ 1.197641] sdhci: Copyright(c) Pierre Ossman
[ 1.201938] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.208800] mmc0: no vqmmc regulator found
[ 1.212817] mmc0: no vmmc regulator found
[ 1.255449] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.264123] usbcore: registered new interface driver usbhid
[ 1.269637] usbhid: USB HID core driver
[ 1.274321] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.280613] nand: Micron MT29F2G08ABAEAWP
[ 1.284584] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.290535] Bad block table found at page 131008, version 0x01
[ 1.296778] Bad block table found at page 130944, version 0x01
[ 1.302825] 3 ofpart partitions found on MTD device pl353-nand
[ 1.308598] Creating 3 MTD partitions on "pl353-nand":
[ 1.313704] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.321778] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.329097] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.339825] TCP: cubic registered
[ 1.343061] NET: Registered protocol family 17
[ 1.347766] Registering SWP/SWPB emulation handler
[ 1.353632] regulator-dummy: disabling
[ 1.357941] UBI: attaching mtd1 to ubi0
[ 1.882330] UBI: scanning is finished
[ 1.893934] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.901011] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.907773] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.914438] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.921316] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.927297] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.934404] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1754858191
[ 1.943447] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.952662] UBI: background thread "ubi_bgt0d" started, PID 1084
[ 1.952667] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.956621] ALSA device list:
[ 1.956625] No soundcards found.
[ 1.972938] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[ 2.001877] UBIFS: recovery needed
[ 2.147206] UBIFS: recovery completed
[ 2.150876] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.156826] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.165927] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.175815] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.180845] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7024E062-5923-42D9-8915-DFE72B38FE49, small LPT model
[ 2.192127] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.199318] devtmpfs: mounted
[ 2.202421] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 3.037219] random: dd urandom read with 1 bits of entropy available
[ 3.425471]
[ 3.425471] bcm54xx_config_init
[ 4.485480]
[ 4.485480] bcm54xx_config_init
[ 8.486290] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 8.492395] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 23.258539] In axi fpga driver!
[ 23.261607] request_mem_region OK!
[ 23.264996] AXI fpga dev virtual address is 0xdf9fe000
[ 23.270132] *base_vir_addr = 0xc51e
[ 23.284628] In fpga mem driver!
[ 23.288057] request_mem_region OK!
[ 23.291557] fpga mem virtual address is 0xe2000000
[ 24.095469]
[ 24.095469] bcm54xx_config_init
[ 25.185466]
[ 25.185466] bcm54xx_config_init
[ 29.186269] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 29.192373] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 385.145432] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram: 507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f94000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d8d000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912
main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8124a44979904814
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[9] has core num=2
main.c:9113: Chain[5] ASIC[24] has core num=1
main.c:9113: Chain[5] ASIC[42] has core num=3
main.c:9113: Chain[5] ASIC[46] has core num=1
main.c:9113: Chain[5] ASIC[54] has core num=1
main.c:9113: Chain[5] ASIC[59] has core num=1
main.c:9113: Chain[5] ASIC[62] has core num=1
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[57] has core num=2
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=142 on chain[5], value=860
main.c:9183: get PIC voltage=6 on chain[6], value=940
main.c:9183: get PIC voltage=142 on chain[7], value=860
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1830 root 0:00 grep bmminer
main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:17:30 CST 2019 type: Antminer S9j
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 8124a44979904814
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4920
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4920
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4920
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4920
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x04 0x4e 0x0e 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=860
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x04 0x4e 0x0e 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=860
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x04 0x4e 0x0e 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=860
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=142 value=860
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=860 [142]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=142
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=142 value=860
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 63 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[9] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[24] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[42] has core num=3
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[46] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[54] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[59] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[62] has core num=1
driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[57] has core num=2
driver-btm-c5.c:4571:set_frequency: miner total rate=9687GH/s ideal_total_hash_rate = 9500GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=675
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=675
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=675
driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=675
driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=675
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=675
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=675
driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=675
driver-btm-c5.c:5119:set_frequency: max freq = 675
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 9687, fixed_totalRate = 9500
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:15 remote:17 offset:27
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[8] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[8] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[8] chip[244] local:15 remote:16 offset:28
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J8] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 870
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 870
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 860
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 860
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=170 total_tv_end_sys=171
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 32
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 9345.846522, ideal hash rate = 9500
driver-btm-c5.c:10387:check_system_work: hash rate is low...
driver-btm-c5.c:15630:re_open_core: re_open_core enter
driver-btm-c5.c:15791:re_open_core: Chain[J6] has 63 asic
driver-btm-c5.c:15791:re_open_core: Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 0, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 1, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 2, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 3, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 4, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 5, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 6, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 7, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 8, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 9, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 10, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 11, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 12, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 13, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 14, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 15, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 16, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 17, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 18, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 19, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15791:re_open_core: Chain[J8] has 63 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[9] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[24] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[42] has core num=3
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[46] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[54] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[59] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[62] has core num=1
driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[57] has core num=2
driver-btm-c5.c:4571:set_frequency: miner total rate=9501GH/s ideal_total_hash_rate = 9500GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=675
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=668
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=662
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=675
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=662
driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=656
driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=675
Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=668
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=662
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=675
Asic[ 0]:656 Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662
Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662
Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662
Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662
Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662
Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662
Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662
Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=662
driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=656
driver-btm-c5.c:5119:set_frequency: max freq = 668
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 9501, fixed_totalRate = 9500
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:16 remote:17 offset:28
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[8] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[8] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[8] chip[244] local:15 remote:16 offset:28
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J8] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:16082:re_open_core: reopen core end
driver-btm-c5.c:10400:check_system_work: re-open core 1 times
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 870
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 870
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 860
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 860
driver-btm-c5.c:10487:check_system_work: voltage_check_done
Fatal Error: network connection lost!
max pcb temperature:52, fan num:2, error counter:1
Fatal Error: network connection lost!
max pcb temperature:52, fan num:2, error counter:2
driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
driver-btm-c5.c:10427:check_system_work: checking hash again
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 9204.112391, ideal hash rate = 9500
Fatal Error: network connection lost!
max pcb temperature:53, fan num:2, error counter:3
driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
Fatal Error: network connection lost!
max pcb temperature:53, fan num:2, error counter:4
driver-btm-c5.c:9037:read_temp_func: Do not clear run bit
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 9236.689022, ideal hash rate = 9500
driver-btm-c5.c:10387:check_system_work: hash rate is low...
driver-btm-c5.c:15630:re_open_core: re_open_core enter
driver-btm-c5.c:15791:re_open_core: Chain[J6] has 63 asic
driver-btm-c5.c:15791:re_open_core: Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 0, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 1, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 2, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 3, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 4, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 5, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 6, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 7, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 8, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 9, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 10, dev->chain_asic_num[i] = 0
do read_temp_func once...
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=75.6140 Asic[02]=76.8220 Asic[03]=74.4740 Asic[04]=71.4030 Asic[05]=73.8360 Asic[06]=72.3600 Asic[07]=76.1180 Asic[08]=78.3320
Asic[09]=76.0000 Asic[10]=71.8900 Asic[11]=80.1110 Asic[12]=72.8460 Asic[13]=68.5680 Asic[14]=70.3130 Asic[15]=75.0940 Asic[16]=74.8590
Asic[17]=79.4730 Asic[18]=73.7350 Asic[19]=80.0600 Asic[20]=74.2390 Asic[21]=73.8190 Asic[22]=76.0670 Asic[23]=77.1580 Asic[24]=74.7420
Asic[25]=75.4130 Asic[26]=74.8590 Asic[27]=75.4800 Asic[28]=74.6080 Asic[29]=76.0670 Asic[30]=77.7280 Asic[31]=72.0240 Asic[32]=76.1680
Asic[33]=74.9770 Asic[34]=78.0640 Asic[35]=75.4300 Asic[36]=77.8120 Asic[37]=78.2150 Asic[38]=77.1580 Asic[39]=75.1780 Asic[40]=75.9160
Asic[41]=72.8800 Asic[42]=74.4900 Asic[43]=81.0670 Asic[44]=75.2620 Asic[45]=80.3790 Asic[46]=76.2350 Asic[47]=76.4360 Asic[48]=72.0070
Asic[49]=73.0140 Asic[50]=76.4700 Asic[51]=76.3190 Asic[52]=79.0200 Asic[53]=81.0670 Asic[54]=71.8730 Asic[55]=76.9900 Asic[56]=78.9030
Asic[57]=77.0570 Asic[58]=75.9160 Asic[59]=77.5940 Asic[60]=76.1180 Asic[61]=69.5580 Asic[62]=75.4470 Asic[63]=81.0500
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=80.4970 Asic[02]=73.1480 Asic[03]=76.9730 Asic[04]=70.4300 Asic[05]=72.8290 Asic[06]=80.9660 Asic[07]=77.0570 Asic[08]=77.0740
Asic[09]=77.6950 Asic[10]=68.1320 Asic[11]=73.6680 Asic[12]=79.0030 Asic[13]=76.6550 Asic[14]=77.0910 Asic[15]=79.2220 Asic[16]=78.5840
Asic[17]=71.1350 Asic[18]=75.0780 Asic[19]=70.8830 Asic[20]=74.9600 Asic[21]=75.8160 Asic[22]=72.2420 Asic[23]=72.0910 Asic[24]=81.3190
Asic[25]=81.6370 Asic[26]=75.5980 Asic[27]=74.0370 Asic[28]=79.1880 Asic[29]=74.3060 Asic[30]=75.5980 Asic[31]=76.4530 Asic[32]=73.6680
Asic[33]=78.7350 Asic[34]=79.9090 Asic[35]=81.5540 Asic[36]=75.8160 Asic[37]=79.6580 Asic[38]=71.7050 Asic[39]=73.8860 Asic[40]=69.4740
Asic[41]=73.0640 Asic[42]=76.1680 Asic[43]=70.4640 Asic[44]=72.0740 Asic[45]=78.5170 Asic[46]=75.4130 Asic[47]=80.7820 Asic[48]=82.9130
Asic[49]=77.1750 Asic[50]=72.4440 Asic[51]=77.0570 Asic[52]=78.2480 Asic[53]=73.9530 Asic[54]=75.6820 Asic[55]=73.1310 Asic[56]=68.2320
Asic[57]=78.3660 Asic[58]=69.5080 Asic[59]=73.9370 Asic[60]=80.3120 Asic[61]=80.0440 Asic[62]=75.6650 Asic[63]=81.0840
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=53
Chain[5] Chip[62] junction temperature=58
Special fix Chain[5] Chip[62] middle Temp = 68
Done read temp on Chain[5]
Chain[7] Chip[244] pcb temperature=51
Chain[7] Chip[62] junction temperature=57
Special fix Chain[7] Chip[62] middle Temp = 66
Done read temp on Chain[7]
Max pcb temp : 53
set FAN speed according to: temp_highest=53 temp_top1[PWM_T]=53 temp_top1[TEMP_POS_LOCAL]=53 temp_change=0 fix_fan_steps=0
FAN PWM: 56
read_temp_func Done!
CRC error counter=0
Seems to me it may be a network connection issue. I am currently using a powerline extender as no ethernet ports in the garage - so if that is the cause I can try using a wifi to ethernet adapter.
So the network connection was the issue, hardwiring off the powerline extension has solved it and I'm currently running at 30 minutes without a failure. Thanks!
Can someone give me help on the PSU situation? I would prefer to get all three hashboards working but not sure that is an option off of a single 110V US outlet.
I have considered getting a apw7 unit, but I cannot determine if that would fix the issue or not, I currently think not. Is there any option to running the third board off of a second PSU from another outlet? I'm not finding much instruction online about this so would appreciate if anyone could chime in.
You should post the kernel log (using the code like so)
A screenshot of both the main page as well as the miner status page would help as well, do so after disconnecting one hashboard as phill explained, unplugged the 3 6pin connectors alone will do.
Code:
kernel goes here
A screenshot of both the main page as well as the miner status page would help as well, do so after disconnecting one hashboard as phill explained, unplugged the 3 6pin connectors alone will do.
okay first off detach 1 board.
there are 3 boards on 110 volt your psu will only run 2 boards .
each board has 3 jacks for the awp3++. so pull the 3 from one board.
get back to us. after you do that
and repeat that for all 3 pool entries .
pool = stratum+tcp://solo.ckpool.org:3333
worker = your btc addy
password = x
this should work. and give you about 8-9 th.
there are 3 boards on 110 volt your psu will only run 2 boards .
each board has 3 jacks for the awp3++. so pull the 3 from one board.
get back to us. after you do that
and repeat that for all 3 pool entries .
pool = stratum+tcp://solo.ckpool.org:3333
worker = your btc addy
password = x
this should work. and give you about 8-9 th.
PSU needs 220VAC for full 1600W output. At 110VAC the PSU is only rated for 1200W which won't run an S9 reliably since it wants at least 1400W. Unless you're underclocking/undervolting which is a whole other discussion!
I finally found an old S9j I decided to use for solo mining as a lottery. I've set the thing up in my garage but can't get it to hash. None of the online tutorials are that helpful because they consist of "do this step" without explaining how or making the assumption that the step will be successful. I have no clue where I even went wrong on this.
I have an APW3++ power source using a 110V standard us outlet. I have successfully hooked it up to the ethernet and can access the configuration settings.
Actual GH is reporting as 0 after 2 hours. I am using CK's solo pool and my miner doesn't register as an active user on that network.
Network settings: DHCP protocol. I found something on bitmain's site about changing this to static. Do I need to do this? What are the gateway and DNS server fields then?
Pool settings: I have URL set to "stratum+tcp://solo.ckpool.org:3333" and worker as my BTC wallet address.
Firmware is updated to most recent on bitmain's page.
Asic status has 0s for all the chips. Fans are both working and unit is not overheating.
Anyone able to assist? I'm not even sure how to troubleshoot it at this point.
I have an APW3++ power source using a 110V standard us outlet. I have successfully hooked it up to the ethernet and can access the configuration settings.
Actual GH is reporting as 0 after 2 hours. I am using CK's solo pool and my miner doesn't register as an active user on that network.
Network settings: DHCP protocol. I found something on bitmain's site about changing this to static. Do I need to do this? What are the gateway and DNS server fields then?
Pool settings: I have URL set to "stratum+tcp://solo.ckpool.org:3333" and worker as my BTC wallet address.
Firmware is updated to most recent on bitmain's page.
Asic status has 0s for all the chips. Fans are both working and unit is not overheating.
Anyone able to assist? I'm not even sure how to troubleshoot it at this point.
Jump to: