Author

Topic: APW3++ IS IT GOOD AT GPU MINING ? (Read 422 times)

hero member
Activity: 1498
Merit: 597
October 31, 2017, 05:48:44 AM
#4
Is bitmains apw3++ good at gpu mining anyone tested those at gpu rigs?
trying to setup a 8 gpu rig i m entirely not interested to gpu mining for last 3 years but will try one rig and i ll see where it is will goes,

Answer to your question , yes, you can use Bitmain APW 3++ for gpu rigs , powering gpu's , risers.
If you want to run the whole rig from the APW 3++ , you need a "PicoPSU adapter" (24pin ATX, one molex 4pin, one Sata, 4pin CPU power ) to power your motherboard .
full member
Activity: 585
Merit: 110
October 31, 2017, 04:36:16 AM
#3
I will suggest hp server psu kit from parallel miner
they are really efficient and more than enough for 8 gpu rig
legendary
Activity: 1624
Merit: 1130
Bitcoin FTW!
October 29, 2017, 08:12:35 PM
#2
A PSU cannot mine by itself.

Now, for powering GPUs, it does a good job but there are better and more high wattage solutions available for less. They might be louder but they'll likely have better efficiency + possibly be more reliable than what Bitmain is cranking out. Server PSUs are what you'll want.
full member
Activity: 333
Merit: 109
October 29, 2017, 08:01:47 PM
#1
Is bitmains apw3++ good at gpu mining anyone tested those at gpu rigs?
trying to setup a 8 gpu rig i m entirely not interested to gpu mining for last 3 years but will try one rig and i ll see where it is will goes,

Jump to: