PSU is probably NFG.
Happened with one of my original APW3++ too. Had to return it.
- Try to start with just Control board connected (no hash board connected to power), if it works, try with just one hashboard connected.
- If you are using a powerbar, check power bar's fuse.
- Try power outlet on different circuit.
- Try using alternative power supply if available.
Topic: APW3++ psu problem (Read 253 times)
can the psu enter a lock state if current is 243Vac at the input.
i have my new S9/apw3++ rigged and i have no output on the psu i try 120v and 240v and noting no output. any suggestions
Jump to: