are the ASICs out user friendly? | Bitcointalksearch.org

btc-bullion

newbie

Activity: 58

Merit: 0

Quote from: Stephen Gornick on October 05, 2012, 06:07:19 PM

The Avalon ASIC will probably be about as close to plug-and-play as you can get.

Quote from: ngzhang on September 17, 2012, 02:48:26 AM

note: host PC NOT required. LAN/WIFI connection required.
-both wired and wireless connection supported.

Perhaps there still will be tech skills necessary (e.g., updating firmware maybe, or Huh

) but it could be as simple as:

1.) open box
2.) plug power cord into 120V AC outlet
3.) plug ethernet cable into router,
4.) register online your Bitcoin address for payout (login using claim code sticker on side of unit)
5.) profit

seems to easy for any ASIC company to "steal" hash power if running their proprietary software. i would prefer to use other mining apps out there.

crazyates

legendary

Activity: 952

Merit: 1000

Quote from: Graet on October 07, 2012, 01:47:19 PM

Re: are the ASICs out user friendly?

No they are not
I cannot even get mine to power on
tried the various air gap power cables available in my country
ALSO the workmanship is terrible seems like there are less parts than there should be :/

Post a picture and i'll see if I can help diagnose any issues. Wink

Kontakt

sr. member

Activity: 266

Merit: 250

They are fairly user friendly, and I do believe that there are several guides here on the forum detailing how to use a rPi with FGPAs to mine. Shouldn't be too difficult to extend that to ASIC control.

Zeek_W

sr. member

Activity: 336

Merit: 250

Quote from: P_Shep on October 07, 2012, 06:14:28 PM

Quote from: Kontakt on October 07, 2012, 01:49:26 PM

Quote from: P_Shep on October 05, 2012, 08:00:08 PM

There's a number of people asking how user friendly the asics will be. Some even thinking they'll just sit and hash on their own.

Make's me think there's be a market for a 'mining buddy', a device with a USB port on one side, ethernet port on the other, running mining software and a web interface to configure it.

But I can't be arsed to develop one.

That would be known as a Raspberry Pi.

Wow, R-pi's are user friendly? You can just plug an asic in and it'll run!!???

I just wish BAMT supported the Pi. As for other OS's and using the Pi I would suggest adding a bit more power to the USB (they are limited to 140mA by default).

Here's a guide:
http://theiopage.blogspot.com.au/2012/06/increasing-raspberry-pis-usb-host.html

Also if you like to tinker you can fudge around with the GPIO pins for further control of external devices

Not to mention TURBO MODE!
http://www.raspberrypi.org/archives/2008

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

Quote from: Kontakt on October 07, 2012, 01:49:26 PM

Quote from: P_Shep on October 05, 2012, 08:00:08 PM

There's a number of people asking how user friendly the asics will be. Some even thinking they'll just sit and hash on their own.

Make's me think there's be a market for a 'mining buddy', a device with a USB port on one side, ethernet port on the other, running mining software and a web interface to configure it.

But I can't be arsed to develop one.

That would be known as a Raspberry Pi.

Wow, R-pi's are user friendly? You can just plug an asic in and it'll run!!???

Cranky4u

hero member

Activity: 810

Merit: 1000

Quote from: Graet on October 07, 2012, 01:47:19 PM

Re: are the ASICs out user friendly?

No they are not
I cannot even get mine to power on
tried the various air gap power cables available in my country
ALSO the workmanship is terrible seems like there are less parts than there should be :/

Graet,

Could you please advise the model of your ASIC? Is it BFL, bASIC, or another?

Cranky

FLHippy

full member

Activity: 784

Merit: 101

Quote from: Kontakt on October 07, 2012, 01:49:26 PM

Quote from: P_Shep on October 05, 2012, 08:00:08 PM

There's a number of people asking how user friendly the asics will be. Some even thinking they'll just sit and hash on their own.

Make's me think there's be a market for a 'mining buddy', a device with a USB port on one side, ethernet port on the other, running mining software and a web interface to configure it.

But I can't be arsed to develop one.

That would be known as a Raspberry Pi.

I love my raspberry pi

I've never owned a more useful computer. I have owned plenty of more powerful computers but never a more useful computer.

Within just a weeks time I had set it up as a media center, a completely offline bitcoin management device, a wheeled robot, and a battery powered deer trail camera with IR support and night vision. You get 20 years of linux device support in a computer the size of a credit card (no shit, it's the exact size of a CC)

And all for $35!

I would recommend it to anyone. No matter what you're into, you have something the RPI can do to make your life easier or more fun.

Kontakt

sr. member

Activity: 266

Merit: 250

Quote from: P_Shep on October 05, 2012, 08:00:08 PM

There's a number of people asking how user friendly the asics will be. Some even thinking they'll just sit and hash on their own.

Make's me think there's be a market for a 'mining buddy', a device with a USB port on one side, ethernet port on the other, running mining software and a web interface to configure it.

But I can't be arsed to develop one.

That would be known as a Raspberry Pi.

Graet

vip

Activity: 980

Merit: 1001

Re: are the ASICs out user friendly?

No they are not
I cannot even get mine to power on
tried the various air gap power cables available in my country
ALSO the workmanship is terrible seems like there are less parts than there should be :/

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

There's a number of people asking how user friendly the asics will be. Some even thinking they'll just sit and hash on their own.

Make's me think there's be a market for a 'mining buddy', a device with a USB port on one side, ethernet port on the other, running mining software and a web interface to configure it.

But I can't be arsed to develop one.

crazyates

legendary

Activity: 952

Merit: 1000

Quote from: Stephen Gornick on October 05, 2012, 06:07:19 PM

Quote from: pretendo on October 05, 2012, 12:44:28 AM

I ask because computer hardware isn't my area of expertise. I built my desktop from parts, that's about as far as my knowledge goes. is it easy to use with pools?

The Avalon ASIC will probably be about as close to plug-and-play as you can get.

Quote from: ngzhang on September 17, 2012, 02:48:26 AM

note: host PC NOT required. LAN/WIFI connection required.
-both wired and wireless connection supported.

Perhaps there still will be tech skills necessary (e.g., updating firmware maybe, or Huh

) but it could be as simple as:

1.) open box
2.) plug power cord into 120V AC outlet
3.) plug ethernet cable into router,
4.) register online your Bitcoin address for payout (login using claim code sticker on side of unit)
5.) profit

I believe the Reclaimer ASICs will also be like this: Plug-and-play, not host PC required.

Stephen Gornick

legendary

Activity: 2506

Merit: 1010

Quote from: pretendo on October 05, 2012, 12:44:28 AM

I ask because computer hardware isn't my area of expertise. I built my desktop from parts, that's about as far as my knowledge goes. is it easy to use with pools?

The Avalon ASIC will probably be about as close to plug-and-play as you can get.

Quote from: ngzhang on September 17, 2012, 02:48:26 AM

note: host PC NOT required. LAN/WIFI connection required.
-both wired and wireless connection supported.

Perhaps there still will be tech skills necessary (e.g., updating firmware maybe, or Huh

) but it could be as simple as:

1.) open box
2.) plug power cord into 120V AC outlet
3.) plug ethernet cable into router,
4.) register online your Bitcoin address for payout (login using claim code sticker on side of unit)
5.) profit

Kontakt

sr. member

Activity: 266

Merit: 250

Me too.

AndrewBUD

hero member

Activity: 1078

Merit: 502

^ for serious? Damn, I am soo in.

FLHippy

full member

Activity: 784

Merit: 101

Quote from: pretendo on October 05, 2012, 03:12:24 AM

Does it come loaded with an operating system?

Dude it totally comes with windows 9 installed and you get a free steam game of your choice too.
I heard from this one guy that knows a guy who's little brother already has one and he says that it is way better than a sharp stick to the eye.

RyanRed

full member

Activity: 126

Merit: 100

Quote from: pretendo on October 05, 2012, 03:12:24 AM

Does it come loaded with an operating system?

ASIC is just the term for the technology within the hardware itself. They will require a host computer, and software to run. The device itself does not function without being sent command to do so. Your buying hardware is all. What the future brings who knows.

pretendo

member

Activity: 112

Merit: 10

Does it come loaded with an operating system?

ssateneth

legendary

Activity: 1344

Merit: 1004

"out there"? You're implying ASICs are already in the hands of end users and driving up difficulty? Proof please.

yrtrnc

hero member

Activity: 605

Merit: 500

Yeah, pretty much plug and play according to BFL.

crazyates

legendary

Activity: 952

Merit: 1000

I think the ASICs will be very similar to the FPGAs that have been in use. Plug in power. Plug in USB. Fire up mining software. You're mining.

pretendo

member

Activity: 112

Merit: 10

I ask because computer hardware isn't my area of expertise. I built my desktop from parts, that's about as far as my knowledge goes. is it easy to use with pools?

Topic: are the ASICs out user friendly? (Read 3096 times)