Bitcoin Forum>Bitcoin>Mining>Mining support
Author

Topic: ASIC Antminer S1 not really mining (Read 1220 times)

tanoury
full member
Activity: 235
Merit: 100
ASIC Antminer S1 not really mining
October 09, 2015, 06:32:21 PM
#10
Quote
Maybe someone more knowledgeable could help?

Meanwhile I would recommend adding the S1 to M's Miner Monitor;
https://bitcointalksearch.org/topic/ms-miner-antsp-monitor-v52-alertsautomassscheduled-rebootmobile-miner-596178

See what it does. It does it through SSH using the cgminer api which i am not familiar with.

Thanks for the info VirosaGITS!
VirosaGITS
legendary
Activity: 1302
Merit: 1068
Re: ASIC Antminer S1 not really mining
October 09, 2015, 05:56:48 PM
#9
Quote from: tanoury on October 09, 2015, 05:46:00 PM

Quote from: VirosaGITS on September 26, 2015, 05:28:23 PM

If you SSH into the miner and type screen -r you should see the shares being reported as such. Rejected, share above diff, over and over.


Tried screen -r and my S1 responded "-ash: screen: not found" . . . do I need to be in a specific directory for this to work?

I see, my bad, screen is not installed on S1 by default and i am not sure about the proper instructions to install it.

I get this;

Code:
root@1S1:~# opkg update
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/Packages.gz.
wget: server returned error: HTTP/1.1 404 Not Found
Collected errors:
 * opkg_download: Failed to download http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/Packages.gz, wget returned 1.
root@1S1:~# opkg install screen
Unknown package 'screen'.
Collected errors:
 * opkg_install_cmd: Cannot install package screen.
Maybe someone more knowledgeable could help?

Meanwhile I would recommend adding the S1 to M's Miner Monitor;
https://bitcointalksearch.org/topic/ms-miner-antsp-monitor-v52-alertsautomassscheduled-rebootmobile-miner-596178

See what it does. It does it through SSH using the cgminer api which i am not familiar with.
tanoury
full member
Activity: 235
Merit: 100
Re: ASIC Antminer S1 not really mining
October 09, 2015, 05:46:00 PM
#8

Quote from: VirosaGITS on September 26, 2015, 05:28:23 PM

If you SSH into the miner and type screen -r you should see the shares being reported as such. Rejected, share above diff, over and over.


Tried screen -r and my S1 responded "-ash: screen: not found" . . . do I need to be in a specific directory for this to work?
VirosaGITS
legendary
Activity: 1302
Merit: 1068
Re: ASIC Antminer S1 not really mining
October 02, 2015, 03:04:22 PM
#7
Quote from: Coinminer11 on October 02, 2015, 10:13:25 AM
Quote from: loltpily21 on October 02, 2015, 10:07:16 AM
Quote from: VirosaGITS on October 02, 2015, 06:41:34 AM
Quote from: loltpily21 on October 01, 2015, 09:58:42 PM
Quote from: VirosaGITS on September 26, 2015, 05:28:23 PM
Can you get me a screenshot of the miner status tab? Are you solo mining? Basically if you're in a proper pool, you should be getting accepted shares. A couples per minutes. Give me more information Smiley
*snip pics*

The reason is because you're pointing your SHA(example Bitcoin) miner to a Scrypt(example Litecoin) port(7777). BTC is 8888. Change your url to stratum+tcp://us-east.multipool.us:8888 and it will work.

The proper url's depending on the algo are listed a bit down the page;
https://www.multipool.us/index.php

Alright, I'll try that when I get home. It does occasionally mine script, just off and on... If I remember correctly, it wouldn't really mine BTC either. Like I said, I'll try it when I get home and share my results.
FYI a sha256 miner will never mine scrypt, ever. You may be seeing the miner trying to getwork from the stratum server but it doesn't mean it's mining.  Don't take this as condescending I am just making you aware is all.

The miner is properly getting work and submitting shares back, but since its in the work algo, all share are abobe target. If you SSH into the miner and type screen -r you should see the shares being reported as such. Rejected, share above diff, over and over.

As the user above said, its absolutely impossible for it to mine scrypt. Its an ASIC, the only single thing it can do is submit SHA256d hash. It has no Scrypt chips on board. Point it to the right pool and i'm pretty sure it will work fine.
Coinminer11
member
Activity: 104
Merit: 10
Never risk more than what you're willing to lose
Re: ASIC Antminer S1 not really mining
October 02, 2015, 10:13:25 AM
#6
Quote from: loltpily21 on October 02, 2015, 10:07:16 AM
Quote from: VirosaGITS on October 02, 2015, 06:41:34 AM
Quote from: loltpily21 on October 01, 2015, 09:58:42 PM
Quote from: VirosaGITS on September 26, 2015, 05:28:23 PM
Can you get me a screenshot of the miner status tab? Are you solo mining? Basically if you're in a proper pool, you should be getting accepted shares. A couples per minutes. Give me more information Smiley
*snip pics*

The reason is because you're pointing your SHA(example Bitcoin) miner to a Scrypt(example Litecoin) port(7777). BTC is 8888. Change your url to stratum+tcp://us-east.multipool.us:8888 and it will work.

The proper url's depending on the algo are listed a bit down the page;
https://www.multipool.us/index.php

Alright, I'll try that when I get home. It does occasionally mine script, just off and on... If I remember correctly, it wouldn't really mine BTC either. Like I said, I'll try it when I get home and share my results.
FYI a sha256 miner will never mine scrypt, ever. You may be seeing the miner trying to getwork from the stratum server but it doesn't mean it's mining.  Don't take this as condescending I am just making you aware is all.
loltpily21
newbie
Activity: 4
Merit: 0
Re: ASIC Antminer S1 not really mining
October 02, 2015, 10:07:16 AM
#5
Quote from: VirosaGITS on October 02, 2015, 06:41:34 AM
Quote from: loltpily21 on October 01, 2015, 09:58:42 PM
Quote from: VirosaGITS on September 26, 2015, 05:28:23 PM
Can you get me a screenshot of the miner status tab? Are you solo mining? Basically if you're in a proper pool, you should be getting accepted shares. A couples per minutes. Give me more information Smiley
*snip pics*

The reason is because you're pointing your SHA(example Bitcoin) miner to a Scrypt(example Litecoin) port(7777). BTC is 8888. Change your url to stratum+tcp://us-east.multipool.us:8888 and it will work.

The proper url's depending on the algo are listed a bit down the page;
https://www.multipool.us/index.php

Alright, I'll try that when I get home. It does occasionally mine script, just off and on... If I remember correctly, it wouldn't really mine BTC either. Like I said, I'll try it when I get home and share my results.
VirosaGITS
legendary
Activity: 1302
Merit: 1068
Re: ASIC Antminer S1 not really mining
October 02, 2015, 06:41:34 AM
#4
Quote from: loltpily21 on October 01, 2015, 09:58:42 PM
Quote from: VirosaGITS on September 26, 2015, 05:28:23 PM
Can you get me a screenshot of the miner status tab? Are you solo mining? Basically if you're in a proper pool, you should be getting accepted shares. A couples per minutes. Give me more information Smiley
*snip pics*

The reason is because you're pointing your SHA(example Bitcoin) miner to a Scrypt(example Litecoin) port(7777). BTC is 8888. Change your url to stratum+tcp://us-east.multipool.us:8888 and it will work.

The proper url's depending on the algo are listed a bit down the page;
https://www.multipool.us/index.php
loltpily21
newbie
Activity: 4
Merit: 0
Re: ASIC Antminer S1 not really mining
October 01, 2015, 09:58:42 PM
#3
Quote from: VirosaGITS on September 26, 2015, 05:28:23 PM
Can you get me a screenshot of the miner status tab? Are you solo mining? Basically if you're in a proper pool, you should be getting accepted shares. A couples per minutes. Give me more information Smiley

http://puu.sh/kvrJb/d3a7147c69.png
http://puu.sh/kvrLx/120fc9441c.png
http://puu.sh/kvrTH/0c1e69a228.png
VirosaGITS
legendary
Activity: 1302
Merit: 1068
Re: ASIC Antminer S1 not really mining
September 26, 2015, 05:28:23 PM
#2
Can you get me a screenshot of the miner status tab? Are you solo mining? Basically if you're in a proper pool, you should be getting accepted shares. A couples per minutes. Give me more information Smiley
loltpily21
newbie
Activity: 4
Merit: 0
Re: ASIC Antminer S1 not really mining
September 23, 2015, 07:21:49 PM
#1
My ASIC miner (Antminer S1 180GH/s) seems to be mining and shows things in the "Miner Status" tab but really, it's doing nothing. 0 Accepted shares and it's not showing up on the pool website.

System Log:
Code:
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.820000] Backport generated by backports.git backports-20130617-4-ge3220f5
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.830000] nf_conntrack version 0.5.0 (962 buckets, 3848 max)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.860000] usbcore: registered new interface driver usbhid
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.860000] usbhid: USB HID core driver
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.870000] usbcore: registered new interface driver usbserial
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.880000] usbcore: registered new interface driver usbserial_generic
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.880000] usbserial: USB Serial support registered for generic
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.920000] xt_time: kernel timezone is -0000
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.940000] cfg80211: Calling CRDA to update world regulatory domain
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.940000] cfg80211: World regulatory domain updated:
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.950000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.960000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.960000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.970000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.980000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   12.990000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.010000] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.150000] ath: EEPROM regdomain: 0x0
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.150000] ath: EEPROM indicates default country code should be used
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.150000] ath: doing EEPROM country->regdmn map search
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.150000] ath: country maps to regdmn code: 0x3a
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.150000] ath: Country alpha2 being used: US
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.150000] ath: Regpair used: 0x3a
Mon Dec  2 11:28:00 2013 kern.debug kernel: [   13.150000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.160000] cfg80211: Calling CRDA for country: US
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.160000] cfg80211: Regulatory domain changed to country: US
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.170000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.180000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.190000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.190000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.200000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.210000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.220000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Mon Dec  2 11:28:00 2013 kern.info kernel: [   13.230000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Mon Dec  2 11:28:00 2013 user.info syslog: ran 16 iterations
Mon Dec  2 11:28:00 2013 daemon.info sysinit: kmod: ran 16 iterations
Mon Dec  2 11:28:04 2013 cron.info crond[576]: crond: crond (busybox 1.19.4) started, log level 8
Mon Dec  2 11:28:05 2013 daemon.notice netifd: Interface 'loopback' is now up
Mon Dec  2 11:28:05 2013 kern.info kernel: [   17.880000] device eth0 entered promiscuous mode
Mon Dec  2 11:28:05 2013 daemon.notice netifd: lan (610): udhcpc (v1.19.4) started
Mon Dec  2 11:28:06 2013 daemon.notice netifd: wan (615): udhcpc (v1.19.4) started
Mon Dec  2 11:28:06 2013 daemon.notice netifd: lan (610): Sending discover...
Mon Dec  2 11:28:06 2013 daemon.notice netifd: wan (615): Sending discover...
Mon Dec  2 11:28:06 2013 authpriv.info dropbear[620]: Not backgrounding
Mon Dec  2 11:28:07 2013 kern.info kernel: [   20.180000] eth1: link up (100Mbps/Full duplex)
Mon Dec  2 11:28:08 2013 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mon Dec  2 11:28:08 2013 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mon Dec  2 11:28:08 2013 daemon.info sysinit: /etc/config/miner_pic.hex
Mon Dec  2 11:28:08 2013 daemon.info dnsmasq[685]: started, version 2.66 cachesize 150
Mon Dec  2 11:28:08 2013 daemon.info dnsmasq[685]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Mon Dec  2 11:28:08 2013 daemon.info dnsmasq[685]: using local addresses only for domain lan
Mon Dec  2 11:28:08 2013 daemon.warn dnsmasq[685]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Dec  2 11:28:08 2013 daemon.info dnsmasq[685]: read /etc/hosts - 1 addresses
Mon Dec  2 11:28:08 2013 kern.warn kernel: [   21.150000] no int in filled
Mon Dec  2 11:28:08 2013 daemon.info sysinit: pic update
Mon Dec  2 11:28:08 2013 daemon.info sysinit: open /dev/bitmainbl0 ok fd = 0x3
Mon Dec  2 11:28:08 2013 daemon.info sysinit: read data
Mon Dec  2 11:28:08 2013 daemon.info sysinit: [0]{0x1}, [1]{0x10}, [2]{0x1}, [3]{0x10}, [4]{0x1}, [5]{0}, [6]{0x10}, [7]{0x1}, [8]{0x10}, [9]{0x4}, [10]{0x4},
Mon Dec  2 11:28:08 2013 daemon.info sysinit: Version 1.0
Mon Dec  2 11:28:08 2013 daemon.info sysinit: open pic update file fail
Mon Dec  2 11:28:08 2013 daemon.info sysinit: Control bootloader to app
Mon Dec  2 11:28:08 2013 daemon.info sysinit: setting up led WAN
Mon Dec  2 11:28:08 2013 daemon.info sysinit: setting up led WANL
Mon Dec  2 11:28:08 2013 daemon.info sysinit: setting up led LAN1
Mon Dec  2 11:28:09 2013 daemon.info sysinit: setting up led LAN2
Mon Dec  2 11:28:09 2013 daemon.info sysinit: setting up led LAN3
Mon Dec  2 11:28:09 2013 daemon.info sysinit: setting up led LAN4
Mon Dec  2 11:28:09 2013 daemon.info sysinit: setting up led WLAN
Mon Dec  2 11:28:09 2013 daemon.notice netifd: lan (610): Sending discover...
Mon Dec  2 11:28:09 2013 daemon.notice netifd: wan (615): Sending discover...
Mon Dec  2 11:28:09 2013 daemon.notice netifd: wan (615): Sending select for 192.168.1.6...
Mon Dec  2 11:28:09 2013 daemon.notice netifd: wan (615): Lease of 192.168.1.6 obtained, lease time 46924544
Mon Dec  2 11:28:09 2013 kern.info kernel: [   22.520000] usb 1-1.1: USB disconnect, device number 3
Mon Dec  2 11:28:09 2013 kern.info kernel: [   22.560000] bitmainbl 1-1.1:1.0: USB Bitmain asic #0 now disconnected
Mon Dec  2 11:28:10 2013 daemon.notice netifd: Interface 'wan' is now up
Mon Dec  2 11:28:10 2013 daemon.info dnsmasq[685]: reading /tmp/resolv.conf.auto
Mon Dec  2 11:28:10 2013 daemon.info dnsmasq[685]: using nameserver 75.75.76.76#53
Mon Dec  2 11:28:10 2013 daemon.info dnsmasq[685]: using nameserver 75.75.75.75#53
Mon Dec  2 11:28:10 2013 daemon.info dnsmasq[685]: using local addresses only for domain lan
Mon Dec  2 11:28:10 2013 kern.info kernel: [   22.810000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform
Mon Dec  2 11:28:10 2013 kern.info kernel: [   22.960000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
Mon Dec  2 11:28:10 2013 kern.warn kernel: [   22.970000] PIC microchip usb OK
Mon Dec  2 11:28:11 2013 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Mon Dec  2 11:28:11 2013 kern.info kernel: [   24.500000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
Mon Dec  2 11:28:12 2013 daemon.notice netifd: lan (610): Sending discover...
Mon Dec  2 11:28:14 2013 daemon.info dnsmasq[685]: reading /tmp/resolv.conf.auto
Mon Dec  2 11:28:14 2013 daemon.info dnsmasq[685]: using nameserver 75.75.76.76#53
Mon Dec  2 11:28:14 2013 daemon.info dnsmasq[685]: using nameserver 75.75.75.75#53
Mon Dec  2 11:28:14 2013 daemon.info dnsmasq[685]: using local addresses only for domain lan
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: resolved peer 3.openwrt.pool.ntp.org to 204.2.134.162
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: sent query to 204.2.134.162
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: resolved peer 2.openwrt.pool.ntp.org to 198.55.111.50
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: sent query to 198.55.111.50
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: resolved peer 1.openwrt.pool.ntp.org to 206.253.165.93
Mon Dec  2 11:28:14 2013 daemon.info sysinit: ntpd: sent query to 206.253.165.93
Mon Dec  2 11:28:15 2013 daemon.info sysinit: ntpd: resolved peer 0.openwrt.pool.ntp.org to 172.82.134.52
Mon Dec  2 11:28:15 2013 daemon.info sysinit: ntpd: sent query to 172.82.134.52
Mon Dec  2 11:28:15 2013 daemon.info sysinit: ntpd: reply from 198.55.111.50: reach 0x01 offset 57092879.553721 delay 0.074673 status 0x24 strat 3 refid 0x602c8e05 rootdelay 0.071397
Mon Dec  2 11:28:15 2013 daemon.info sysinit: ntpd: reply from 172.82.134.52: reach 0x01 offset 57092879.550340 delay 0.030609 status 0x24 strat 2 refid 0x98028536 rootdelay 0.019471
Mon Dec  2 11:28:15 2013 daemon.info sysinit: ntpd: reply from 206.253.165.93: reach 0x01 offset 57092879.556124 delay 0.076759 status 0x24 strat 3 refid 0xd04b5804 rootdelay 0.029862
Mon Dec  2 11:28:15 2013 daemon.info sysinit: ntpd: reply from 204.2.134.162: reach 0x01 offset 57092879.568384 delay 0.087259 status 0x24 strat 2 refid 0xcc7b0248 rootdelay 0.001617
Mon Dec  2 11:28:16 2013 daemon.info sysinit: ntpd: sent query to 198.55.111.50
Mon Dec  2 11:28:16 2013 daemon.info sysinit: ntpd: sent query to 206.253.165.93
Mon Dec  2 11:28:16 2013 daemon.info sysinit: ntpd: sent query to 172.82.134.52
Mon Dec  2 11:28:16 2013 daemon.info sysinit: ntpd: reply from 172.82.134.52: reach 0x03 offset 57092879.552752 delay 0.034941 status 0x24 strat 2 refid 0x98028536 rootdelay 0.019471
Mon Dec  2 11:28:16 2013 daemon.info sysinit: ntpd: reply from 198.55.111.50: reach 0x03 offset 57092879.553390 delay 0.074323 status 0x24 strat 3 refid 0x602c8e05 rootdelay 0.071397
Mon Dec  2 11:28:16 2013 daemon.info sysinit: ntpd: reply from 206.253.165.93: reach 0x03 offset 57092879.557556 delay 0.079251 status 0x24 strat 3 refid 0xd04b5804 rootdelay 0.029862
Mon Dec  2 11:28:17 2013 daemon.info sysinit: ntpd: sent query to 204.2.134.162
Mon Dec  2 11:28:17 2013 daemon.info sysinit: ntpd: reply from 204.2.134.162: reach 0x03 offset 57092879.567893 delay 0.087053 status 0x24 strat 2 refid 0xcc7b0248 rootdelay 0.001617
Mon Dec  2 11:28:18 2013 daemon.info sysinit: ntpd: sent query to 204.2.134.162
Mon Dec  2 11:28:18 2013 daemon.info sysinit: ntpd: sent query to 198.55.111.50
Mon Dec  2 11:28:18 2013 daemon.info sysinit: ntpd: sent query to 206.253.165.93
Mon Dec  2 11:28:18 2013 daemon.info sysinit: ntpd: sent query to 172.82.134.52
Mon Dec  2 11:28:18 2013 daemon.info sysinit: ntpd: reply from 172.82.134.52: reach 0x07 offset 57092879.552763 delay 0.035021 status 0x24 strat 2 refid 0x98028536 rootdelay 0.019471
Mon Dec  2 11:28:18 2013 daemon.info sysinit: ntpd: reply from 198.55.111.50: reach 0x07 offset 57092879.553406 delay 0.074287 status 0x24 strat 3 refid 0x602c8e05 rootdelay 0.071397
Mon Dec  2 11:28:18 2013 daemon.info sysinit: ntpd: reply from 206.253.165.93: reach 0x07 offset 57092879.557340 delay 0.079818 status 0x24 strat 3 refid 0xd04b5804 rootdelay 0.029862
Mon Dec  2 11:28:18 2013 daemon.info sysinit: ntpd: reply from 204.2.134.162: reach 0x07 offset 57092879.568583 delay 0.088689 status 0x24 strat 2 refid 0xcc7b0248 rootdelay 0.001617
Mon Dec  2 11:28:19 2013 daemon.info sysinit: ntpd: sent query to 198.55.111.50
Mon Dec  2 11:28:19 2013 daemon.info sysinit: ntpd: sent query to 206.253.165.93
Mon Dec  2 11:28:19 2013 daemon.info sysinit: ntpd: sent query to 172.82.134.52
Mon Dec  2 11:28:19 2013 daemon.info sysinit: ntpd: reply from 172.82.134.52: reach 0x0f offset 57092879.556140 delay 0.041588 status 0x24 strat 2 refid 0x98028536 rootdelay 0.019471
Mon Dec  2 11:28:19 2013 daemon.info sysinit: ntpd: reply from 198.55.111.50: reach 0x0f offset 57092879.556798 delay 0.081047 status 0x24 strat 3 refid 0x602c8e05 rootdelay 0.071397
Mon Dec  2 11:28:19 2013 daemon.info sysinit: ntpd: reply from 206.253.165.93: reach 0x0f offset 57092879.561141 delay 0.085462 status 0x24 strat 3 refid 0xd04b5804 rootdelay 0.029862
Mon Dec  2 11:28:20 2013 daemon.info sysinit: ntpd: sent query to 204.2.134.162
Mon Dec  2 11:28:20 2013 daemon.info sysinit: ntpd: sent query to 198.55.111.50
Mon Dec  2 11:28:20 2013 daemon.info sysinit: ntpd: sent query to 172.82.134.52
Mon Dec  2 11:28:20 2013 daemon.info sysinit: ntpd: reply from 172.82.134.52: reach 0x1f offset 57092879.552372 delay 0.035049 status 0x24 strat 2 refid 0x98028536 rootdelay 0.019471
Mon Dec  2 11:28:20 2013 daemon.info sysinit: ntpd: reply from 198.55.111.50: reach 0x1f offset 57092879.555192 delay 0.078758 status 0x24 strat 3 refid 0x602c8e05 rootdelay 0.071397
Mon Dec  2 11:28:20 2013 daemon.info sysinit: ntpd: reply from 204.2.134.162: reach 0x0f offset 57092879.568455 delay 0.087248 status 0x24 strat 2 refid 0xcc7b0248 rootdelay 0.001617
Mon Dec  2 11:28:21 2013 daemon.info sysinit: ntpd: sent query to 204.2.134.162
Mon Dec  2 11:28:21 2013 daemon.info sysinit: ntpd: sent query to 206.253.165.93
Thu Sep 24 06:36:21 2015 daemon.info sysinit: ntpd: reply from 206.253.165.93: reach 0x1f offset 57092879.557534 delay 0.078146 status 0x24 strat 3 refid 0xd04b5804 rootdelay 0.029862
Thu Sep 24 06:36:21 2015 daemon.info sysinit: ntpd: setting clock to Thu Sep 24 06:36:21 CST 2015 (offset 57092879.552263s)
Thu Sep 24 06:36:21 2015 daemon.info sysinit: --bitmain-options 115200:32:8:40:350:4d81 -o stratum+tcp://us-east.multipool.us:7777 -O loltpily21.user1:x -o stratum+tcp://us-east.multipool.us:7777 -O loltpily21.user2:x -o stratum+tcp://us-east.multipool.us:7777 -O loltpily21.user3:x --api-listen --api-network
Thu Sep 24 06:36:21 2015 daemon.info sysinit: - init complete -
Thu Sep 24 06:37:01 2015 cron.err crond[576]: time disparity of 951548 minutes detected
Thu Sep 24 06:39:01 2015 cron.info crond[576]: crond: USER root pid 908 cmd /usr/bin/cgminer-monitor
Thu Sep 24 06:42:01 2015 cron.info crond[576]: crond: USER root pid 930 cmd /usr/bin/cgminer-monitor
Thu Sep 24 06:43:54 2015 authpriv.info dropbear[953]: Child connection from 192.168.1.15:8179
Thu Sep 24 06:45:01 2015 cron.info crond[576]: crond: USER root pid 958 cmd /usr/bin/cgminer-monitor
Thu Sep 24 06:45:41 2015 authpriv.notice dropbear[953]: Password auth succeeded for 'root' from 192.168.1.15:8179
Thu Sep 24 06:48:01 2015 cron.info crond[576]: crond: USER root pid 1010 cmd /usr/bin/cgminer-monitor
Thu Sep 24 06:51:01 2015 cron.info crond[576]: crond: USER root pid 1052 cmd /usr/bin/cgminer-monitor
Thu Sep 24 06:54:01 2015 cron.info crond[576]: crond: USER root pid 1075 cmd /usr/bin/cgminer-monitor
Thu Sep 24 06:57:01 2015 cron.info crond[576]: crond: USER root pid 1178 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:00:01 2015 cron.info crond[576]: crond: USER root pid 1236 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:03:01 2015 cron.info crond[576]: crond: USER root pid 1424 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:06:01 2015 cron.info crond[576]: crond: USER root pid 1706 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:09:01 2015 cron.info crond[576]: crond: USER root pid 1996 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:12:01 2015 cron.info crond[576]: crond: USER root pid 2276 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:13:26 2015 daemon.info dnsmasq[685]: exiting on receipt of SIGTERM
Thu Sep 24 07:13:34 2015 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Sep 24 07:13:34 2015 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Sep 24 07:13:34 2015 daemon.info dnsmasq[2465]: started, version 2.66 cachesize 150
Thu Sep 24 07:13:34 2015 daemon.info dnsmasq[2465]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Thu Sep 24 07:13:34 2015 daemon.info dnsmasq[2465]: using local addresses only for domain lan
Thu Sep 24 07:13:35 2015 daemon.info dnsmasq[2465]: reading /tmp/resolv.conf.auto
Thu Sep 24 07:13:35 2015 daemon.info dnsmasq[2465]: using nameserver 75.75.76.76#53
Thu Sep 24 07:13:35 2015 daemon.info dnsmasq[2465]: using nameserver 75.75.75.75#53
Thu Sep 24 07:13:35 2015 daemon.info dnsmasq[2465]: using local addresses only for domain lan
Thu Sep 24 07:13:35 2015 daemon.info dnsmasq[2465]: read /etc/hosts - 1 addresses
Thu Sep 24 07:15:01 2015 cron.info crond[576]: crond: USER root pid 2539 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:18:01 2015 cron.info crond[576]: crond: USER root pid 2565 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:21:01 2015 cron.info crond[576]: crond: USER root pid 2591 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:24:01 2015 cron.info crond[576]: crond: USER root pid 2617 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:27:01 2015 cron.info crond[576]: crond: USER root pid 2635 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:30:01 2015 cron.info crond[576]: crond: USER root pid 2658 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:33:01 2015 cron.info crond[576]: crond: USER root pid 2683 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:36:01 2015 cron.info crond[576]: crond: USER root pid 2717 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:39:01 2015 cron.info crond[576]: crond: USER root pid 2764 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:42:01 2015 cron.info crond[576]: crond: USER root pid 2792 cmd /usr/bin/cgminer-monitor
Thu Sep 24 07:45:01 2015 cron.info crond[576]: crond: USER root pid 2836 cmd /usr/bin/cgminer-monitor

Kernel Log:
Code:
[    0.000000] Linux version 3.10.12 (xxl@ubuntu) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38031) ) #2 Fri Feb 7 18:50:12 CST 2014
[    0.000000] MyLoader: sysp=1bec2fee, boardp=fdd6ef6f, parts=fc031564
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 803005b0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=TL-WR741ND-v4 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 61336k/65536k available (2187k kernel code, 4200k reserved, 588k data, 232k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is TP-LINK TL-WR741ND v4
[    0.100000] MAC FF:FF:FF:FF:FF:FF
[    0.100000] MAC 20:59:a0:b2:4e:54
[    0.560000] bio: create slab at 0
[    0.560000] Switching to clocksource MIPS
[    0.570000] NET: Registered protocol family 2
[    0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.580000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.580000] TCP: Hash tables configured (established 512 bind 512)
[    0.590000] TCP: reno registered
[    0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.610000] NET: Registered protocol family 1
[    0.610000] PCI: CLS 0 bytes, default 32
[    0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.640000] msgmni has been set to 119
[    0.650000] io scheduler noop registered
[    0.650000] io scheduler deadline registered (default)
[    0.650000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.670000] console [ttyATH0] enabled, bootconsole disabled
[    0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.690000] m25p80 spi0.0: found gd25q64, expected m25p80
[    0.690000] m25p80 spi0.0: gd25q64 (8192 Kbytes)
[    0.700000] 5 tp-link partitions found on MTD device spi0.0
[    0.700000] Creating 5 MTD partitions on "spi0.0":
[    0.710000] 0x000000000000-0x000000020000 : "u-boot"
[    0.710000] 0x000000020000-0x000000117d84 : "kernel"
[    0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.730000] 0x000000117d84-0x0000007f0000 : "rootfs"
[    0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.750000] mtd: partition "rootfs" set to be root filesystem
[    0.750000] mtd: partition "rootfs_data" created automatically, ofs=0x370000, len=0x480000
[    0.760000] 0x000000370000-0x0000007f0000 : "rootfs_data"
[    0.770000] 0x000000020000-0x0000007f0000 : "firmware"
[    0.770000] 0x0000007f0000-0x000000800000 : "art"
[    0.790000] libphy: ag71xx_mdio: probed
[    0.800000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    1.350000] eth0: Found an AR7240/AR9330 built-in switch
[    2.390000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    2.940000] ag71xx ag71xx.0 eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    2.950000] TCP: cubic registered
[    2.950000] NET: Registered protocol family 17
[    2.960000] 8021q: 802.1Q VLAN Support v1.8
[    2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.980000] Freeing unused kernel memory: 232K (80316000 - 80350000)
[    5.810000] usbcore: registered new interface driver usbfs
[    5.810000] usbcore: registered new interface driver hub
[    5.820000] usbcore: registered new device driver usb
[    5.820000] usbcore: registered new interface driver bitmain
[    5.830000] hash ok
[    5.830000] hashtest OK
[    5.830000] bitmain-asic: success to register device
[    5.840000] usbcore: registered new interface driver bitmainbl
[    5.850000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.860000] ehci-platform: EHCI generic platform driver
[    5.860000] ehci-platform ehci-platform: EHCI Host Controller
[    5.870000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    5.870000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    5.900000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    5.900000] hub 1-0:1.0: USB hub found
[    5.900000] hub 1-0:1.0: 1 port detected
[    6.240000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.390000] hub 1-1:1.0: USB hub found
[    6.390000] hub 1-1:1.0: 2 ports detected
[    6.680000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[    6.810000] bitmainbl 1-1.1:1.0: USB Bitmain bootloader device now attached to USB Bitmain bootloader-0
[    6.820000] PIC microchip bootloader usb OK
[   10.560000] jffs2: notice: (328) jffs2_build_xattr_subsystem: complete building xattr subsystem, 25 of xdatum (0 unchecked, 24 orphan) and 39 of xref (0 dead, 24 orphan) found.
[   12.810000] hidraw: raw HID events driver (C) Jiri Kosina
[   12.810000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[   12.820000] Backport generated by backports.git backports-20130617-4-ge3220f5
[   12.830000] nf_conntrack version 0.5.0 (962 buckets, 3848 max)
[   12.860000] usbcore: registered new interface driver usbhid
[   12.860000] usbhid: USB HID core driver
[   12.870000] usbcore: registered new interface driver usbserial
[   12.880000] usbcore: registered new interface driver usbserial_generic
[   12.880000] usbserial: USB Serial support registered for generic
[   12.920000] xt_time: kernel timezone is -0000
[   12.940000] cfg80211: Calling CRDA to update world regulatory domain
[   12.940000] cfg80211: World regulatory domain updated:
[   12.950000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.960000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.960000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.970000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.980000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.990000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.010000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.150000] ath: EEPROM regdomain: 0x0
[   13.150000] ath: EEPROM indicates default country code should be used
[   13.150000] ath: doing EEPROM country->regdmn map search
[   13.150000] ath: country maps to regdmn code: 0x3a
[   13.150000] ath: Country alpha2 being used: US
[   13.150000] ath: Regpair used: 0x3a
[   13.150000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.160000] cfg80211: Calling CRDA for country: US
[   13.160000] cfg80211: Regulatory domain changed to country: US
[   13.170000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.180000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   13.190000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   13.190000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.200000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.210000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.220000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   13.230000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   17.880000] device eth0 entered promiscuous mode
[   20.180000] eth1: link up (100Mbps/Full duplex)
[   21.150000] no int in filled
[   22.520000] usb 1-1.1: USB disconnect, device number 3
[   22.560000] bitmainbl 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[   22.810000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform
[   22.960000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[   22.970000] PIC microchip usb OK
[   24.500000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected

If you need more info I could get it for you.

Thanks,
     Owen
Bitcoin Forum>Bitcoin>Mining>Mining support
Jump to: