Author

Topic: Asic Eruptor Power (Read 450 times)

newbie
Activity: 9
Merit: 0
September 21, 2013, 06:41:58 AM
#3
Thanks a bunch brother! Much obliged!! The next round is on me!  Grin
newbie
Activity: 56
Merit: 0
September 20, 2013, 10:13:02 PM
#2
You will be happy to know that the grounds are common.  Smiley


http://reprap.org/wiki/File:PCPowerSupply-atx-pinouts.gif
newbie
Activity: 9
Merit: 0
September 20, 2013, 10:05:13 PM
#1
greetings everyone,

Just starting to get into the world of mining bitcoins and i have a question in regards to the powering of the board after reading this tutorial by dogie(nice job btw!!!) Well done! his link can be seen here....
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369

I see he uses the molex splitter to have thicker wiring,  and strips the yellow wires from each end of the split(2 yellows), which are +12v each, and they are placed in their appropriate spots.
Then he strips both of the black wires (4 total) ...they are both grounds. One is -12v and the other is -5v (on each molex connector).I see he has them doubled in their respective sockets.
My question is this. Are the Ground wires paired -12/-5v in each socket or are they paired -12v/-12v and -5v/-5v. My apologies if this is a stupid question, as said Im just starting to get into this and would like some clarification! Any and all responses are appreciated! Thank you everyone for your time!
And thank you dogie for the tut!!! Nice work!!!  Grin
Jump to: