Author

Topic: ASIC miner USB 330 Mh/sec - problem (Read 1099 times)

newbie
Activity: 13
Merit: 0
November 20, 2013, 04:13:37 PM
#5
Thanks guys...stupid me
They are in a hub which is getting not enough power I guess.
However I have new blade for 11 Gh/sec and I got them on a rock bottom price.
160 USD versus almost 300 now.

newbie
Activity: 47
Merit: 0
November 20, 2013, 02:27:26 PM
#4
Do you use Gigabyte motherboard?
hero member
Activity: 546
Merit: 500
November 20, 2013, 10:56:11 AM
#3
Are the erupters in a hub or directly in the PC?

This is the problem:
 ICA 0:                | 375.1M/342.6Mh/s | A: 399 R: 1 HW:1093 U:0.22/m

LOTS of hardware errors either it isn't getting enough power or is bad is my guess.  Try running the erupters 1 at a time and see if you get the errors with them individually.  If one works and the other doesn't I'm suspecting a bad erupter.
full member
Activity: 126
Merit: 100
November 20, 2013, 10:54:59 AM
#2
ICA0 is getting alot of hardware errors probably not getting enough power so its not atually mining much
newbie
Activity: 13
Merit: 0
November 20, 2013, 10:16:32 AM
#1
Hi guys
I have 2 x USB ASIC units (330Mh/sec) in one PC, mining with cgminer 3.1.1
All seems to be fine apart from results in the pool's stats. It shows like only 1 miner is working (about 300Mh/sec on this miner)
However cgminer shows all is good. What could be the reason?
Thanks!


cgminer version 3.1.1 - Started: [2013-11-19 13:28:01]

 (5s):668.9M (avg):683.8Mh/s | A:6413  R:14  HW:1157  U:3.6/m  WU:4.3/m
 ST: 2  SS: 0  NB: 210  LW: 38179  GF: 1  RF: 0
 Connected to stratum.bitcoin.cz diff 1 with stratum as user XXXXX
 Block: 000053dc04f3a1b1...  Diff:609M  Started: [19:10:44]  Best share: 1.85M


 GPU 0:  63.0C         | 7.167M/7.393Mh/s | A: 161 R: 0 HW:   0 U:0.09/m I:-1
 ICA 0:                | 375.1M/342.6Mh/s | A: 399 R: 1 HW:1093 U:0.22/m
 ICA 1:                | 332.4M/333.9Mh/s | A:5854 R:13 HW:  64 U:3.28/m
Jump to: