link is wrong, should say bitcointalk.org
Faillink fixed
Topic: AsicMiner Blade some easy questions (Read 1131 times)
Faillink fixed
link is wrong, should say bitcointalk.org
PM'ed my guide
Would you consider publishing it, or if not, pming me as well?
Pm'ed,
Powering, cooling, mounting and setup guide is up if anyone here still needs it:
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369
PM'ed my guide
Would you consider publishing it, or if not, pming me as well?
PM'ed my guide
Hello 
i just bought 2 blades but have some questions about the power supply.
I know that i need to connect 4 wires from my psu to the delivered plug.
Now my question is, how can this work?
I would take a pcie extension and use 4 cables,
but in theorie a 6 pin pcie plug can only provide
75 watt, if i use 4 of the 6 cables the blade would only
gain 50 watt. Ive seen that a blade needs 70 watt and overclocked
Up to 120 watt. Can somone explain me how to provide
Enough power from only 4 cables?
A other question on the overclocking, i saw it is just
Possible to set the clockrate to high. Is there a possibility
To bring it higher then the predefined 12,8 ghs @ overclocked settings?
The cooling would be no problem.
Which voltage can the core handle under air cooling?
I will cool it with 2x 120mm scythe ultra kaze@3000rpm with 220m^3/h on heat sink,
1x 140mm fan with 180m^3/h airflow on power module and 1x200mm with 180m^3/h under the blade, to
blow air in the chip side.
Am hoping for help
Greetings! (sry for my bad english)
i just bought 2 blades but have some questions about the power supply.
I know that i need to connect 4 wires from my psu to the delivered plug.
Now my question is, how can this work?
I would take a pcie extension and use 4 cables,
but in theorie a 6 pin pcie plug can only provide
75 watt, if i use 4 of the 6 cables the blade would only
gain 50 watt. Ive seen that a blade needs 70 watt and overclocked
Up to 120 watt. Can somone explain me how to provide
Enough power from only 4 cables?
A other question on the overclocking, i saw it is just
Possible to set the clockrate to high. Is there a possibility
To bring it higher then the predefined 12,8 ghs @ overclocked settings?
The cooling would be no problem.
Which voltage can the core handle under air cooling?
I will cool it with 2x 120mm scythe ultra kaze@3000rpm with 220m^3/h on heat sink,
1x 140mm fan with 180m^3/h airflow on power module and 1x200mm with 180m^3/h under the blade, to
blow air in the chip side.
Am hoping for help
Greetings! (sry for my bad english)
Jump to: