Topic: AsicMiNer ---- Blade V2 Make it BURNING !!! sweet Hack (Read 1739 times)
Surprised it lasted that long.
Side.... i said about... I make my Blade BURNING 
I powered it with a 1000W PSU a litlle more 1Hours... oh oui asic's smell plastic !
I powered it with a 1000W PSU a litlle more 1Hours... oh oui asic's smell plastic !
Got any kind of measure for power consumption off that? A 25GH Blade would be something like 400W, run at 28MHz oscillator and require probably 2V core (which should explode the ASIC). Pretty sure a 1203 resistor would lower the core voltage.
Thanks for linking my website, by the way. I'm still selling the kits to overclock these Blades to 13/14.4/14.9GH stable (instead of fake) if anyone's interested.
Thanks for linking my website, by the way. I'm still selling the kits to overclock these Blades to 13/14.4/14.9GH stable (instead of fake) if anyone's interested.
we play to, who have the most longest?? a$$hole
noobs 
It's not a fake; I really make my Blade burning.
It's not a screan captur modified;
I test a lot of little thing my blade really work at 25Gh/s during 3 hours.
I use and modified this Tuto;
http://www.gekkoscience.com/be_ins/blade_ins.html
Oscilator -- 2 X 16mhZ
surface-mount resistor ::: 1203 at R29 & R41
my blade really burning... I'm not a joker !
Mining with blade is DEAD ! ! !
It's not a screan captur modified;
I test a lot of little thing my blade really work at 25Gh/s during 3 hours.
I use and modified this Tuto;
http://www.gekkoscience.com/be_ins/blade_ins.html
Oscilator -- 2 X 16mhZ
surface-mount resistor ::: 1203 at R29 & R41
my blade really burning... I'm not a joker !
Mining with blade is DEAD ! ! !
Oh yeah? ... I hacked my V1 into an Antminer --- beat that
No, He just made a screenshot straight after restarting Blade. It takes a time before average can settle down to proper numbers, sometimes it's 5x lower sometimes higher. But there is absolutely no O/C, it's just a FAKE.
Even simpler yet. I wasn't aware of that, I guess I never noticed it.
No, He just made a screenshot straight after restarting Blade. It takes a time before average can settle down to proper numbers, sometimes it's 5x lower sometimes higher. But there is absolutely no O/C, it's just a FAKE.
This is simple, You just altered the firmware on the blade to change the calculation. Although you can overclock the shit out of those blades, there is really no way to make them 6.5x more efficient. So, I call bs
Who can beat me
Jump to: