Topic: ASICMiner Block Erupter question (Read 714 times)
works fine with legacy USB even according to some members.
you can use Bfgminer + erupters on the Pi (with the USB powered hub) with Raspbian just fine, no need to go to a customised build.
USB 2.0 is just fine and I recommend using a raspberry pi with minepeon.
MinePeon by mineforeman
http://sourceforge.net/projects/minepeon/
The raspberry pi can't run the block erupters without a USB powered hub.
MinePeon by mineforeman
http://sourceforge.net/projects/minepeon/
The raspberry pi can't run the block erupters without a USB powered hub.
My question: Do the ASICMiner Block Erupter need USB 3.0 to mine at 333 Mh/s or will they still mine at peak with 2.0?
They are working even with USB 1.1
Good luck with mining.
USB 2.0 is suffice.
Happy mining
Happy mining
Mine is working fine on 2.0!
Damn difficulty spikes suck though
Damn difficulty spikes suck though
+1 getting hard to mine if you under 10ghps
Mine is working fine on 2.0!
Damn difficulty spikes suck though
Damn difficulty spikes suck though
I am looking into getting a dedicated machine to start plugging hubs into with my erupters, but I can't find anything that says whether or not the erupters need USB 3.0
My question: Do the ASICMiner Block Erupter need USB 3.0 to mine at 333 Mh/s or will they still mine at peak with 2.0?
My question: Do the ASICMiner Block Erupter need USB 3.0 to mine at 333 Mh/s or will they still mine at peak with 2.0?
Jump to: