Hi Everyone-
I started a thread where we can consolidate information from the various ASICMiner Tube -related threads. the thread is here:
https://bitcointalksearch.org/topic/asicminer-tube-owners-thread-768500
I added what info I could in the time I had to spare. All contributions are welcome. I will monitor that thread and add info to the OP as it is posted.
Topic: ASICMINER TUBE first look :) IKEA style miner first time ever (Read 8178 times)
September 02, 2014, 09:14:12 AM
My Controller is bad (maybe only this one).
When it is connected to mining devices and they were hashing you will be unable to change settings.
To perform save you have to power down controller, take off hashing cable, turn on and then save settings.
After that turn off controller and connect hashing cable overthise not all boards will be visible.
I do not reccomend hashing at ghash.io. They had 1 hour downtime yesterday and today 2 hours (uk1.ghash.io)
Unfortunatelly you cant set backup pool at controller so you will loose money as i did. (7.5TH x 3 hours).
Miners while not hashing are eating electricity (around 235W per tube) so you loose even more due to web interface.
I have changed pool to slush (mining.bitcoin.cz) but it was not easy.
When it is connected to mining devices and they were hashing you will be unable to change settings.
To perform save you have to power down controller, take off hashing cable, turn on and then save settings.
After that turn off controller and connect hashing cable overthise not all boards will be visible.
I do not reccomend hashing at ghash.io. They had 1 hour downtime yesterday and today 2 hours (uk1.ghash.io)
Unfortunatelly you cant set backup pool at controller so you will loose money as i did. (7.5TH x 3 hours).
Miners while not hashing are eating electricity (around 235W per tube) so you loose even more due to web interface.
I have changed pool to slush (mining.bitcoin.cz) but it was not easy.
September 01, 2014, 06:50:57 PM
The tube probably works...just the ethernet controller does not. I hope that it has 4 good boards, but I have no way to test it with out the controller.
September 01, 2014, 03:24:43 PM
I will ship it out for you tomorrow if you want it!
okay I will pm.
and pm has been sent
Alright done deal this is sold now...hope she has all good blades for you.
well we will deal with blade quality once I get them (fingers crossed).
I most likely will test them one by one. I am hoping to build a 1.6th unit. .79 is hard to turn down.
Why are you paying 0.79 BTC for a malfunctioning Tube when you can get a new one for the same price? Canary will likely lower his prices any time now. Just keep an eye on the group buy thread.
September 01, 2014, 03:22:12 PM
i got
2.5 unit
4.15 unit
0.84 unit
they are hashing stable.
noticed strange thing, sometimes randomly one chip or more goes off.
it clears after restart
maybe periodic software controller reset is solution for this?
2.5 unit
4.15 unit
0.84 unit
they are hashing stable.
noticed strange thing, sometimes randomly one chip or more goes off.
it clears after restart
maybe periodic software controller reset is solution for this?
Just hope it dosnt degrade like my cube did, same company, all chips would x, restart then ok for 3 to 10 days.
after 90 days it kept doing it more often then finally quit. Never overlocked, (wouldn't over clock anyway, straight to x).
September 01, 2014, 02:19:42 PM
i got
2.5 unit
4.15 unit
0.84 unit
they are hashing stable.
noticed strange thing, sometimes randomly one chip or more goes off.
it clears after restart
maybe periodic software controller reset is solution for this?
2.5 unit
4.15 unit
0.84 unit
they are hashing stable.
noticed strange thing, sometimes randomly one chip or more goes off.
it clears after restart
maybe periodic software controller reset is solution for this?
September 01, 2014, 01:40:12 PM
I will ship it out for you tomorrow if you want it!
okay I will pm.
and pm has been sent
Alright done deal this is sold now...hope she has all good blades for you.
well we will deal with blade quality once I get them (fingers crossed).
I most likely will test them one by one. I am hoping to build a 1.6th unit. .79 is hard to turn down.
September 01, 2014, 01:27:07 PM
I will ship it out for you tomorrow if you want it!
okay I will pm.
and pm has been sent
Alright done deal this is sold now...hope she has all good blades for you.
September 01, 2014, 01:14:13 PM
I will ship it out for you tomorrow if you want it!
okay I will pm.
and pm has been sent
September 01, 2014, 01:11:02 PM
I will ship it out for you tomorrow if you want it!
September 01, 2014, 01:10:14 PM
Looks like the S3 is a better deal as its price is dropping.
The Tubes have also just been discounted for round 2 sales. The price is now 7.9 BTC for a set of 10 Tubes (minimum direct order quantity), so that's 0.79 BTC per Tube. That works out to 380.72 USD at 482 USD/BTC (bitstamp rate at time of writing).
No way I would buy another one of these...my first one doesn't even work yet. If anyone wants to buy my tube fully assembled for .79 let me know... mine shipped with a dead ethernet controller.
.79 btc is very tempting pm sent
September 01, 2014, 01:03:21 PM
Looks like the S3 is a better deal as its price is dropping.
The Tubes have also just been discounted for round 2 sales. The price is now 7.9 BTC for a set of 10 Tubes (minimum direct order quantity), so that's 0.79 BTC per Tube. That works out to 380.72 USD at 482 USD/BTC (bitstamp rate at time of writing).
No way I would buy another one of these...my first one doesn't even work yet. If anyone wants to buy my tube fully assembled for .79 let me know... mine shipped with a dead ethernet controller.
September 01, 2014, 12:47:57 PM
Looks like the S3 is a better deal as its price is dropping.
The Tubes have also just been discounted for round 2 sales. The price is now 7.9 BTC for a set of 10 Tubes (minimum direct order quantity), so that's 0.79 BTC per Tube. That works out to 380.72 USD at 482 USD/BTC (bitstamp rate at time of writing).
If anyone wants a video tutorial of almost all the steps to build an ASICMiner Tube I recorded my process. Hope it helps 
It talks about all the little quirks and stuff and things to watch out for so you don't have to learn the hard way.
http://youtu.be/zEL5EKWwBx0
It talks about all the little quirks and stuff and things to watch out for so you don't have to learn the hard way.http://youtu.be/zEL5EKWwBx0
Hope you don't have a feline 
Im sure it would love to play with all them wires !
I didn't check availability on S3's, saw they were being sold in forums for $349 (probably late delivery as you said) or .6? used.
Hope those things hold up better than my cube did.
Im sure it would love to play with all them wires !
I didn't check availability on S3's, saw they were being sold in forums for $349 (probably late delivery as you said) or .6? used.
Hope those things hold up better than my cube did.
Block Erupter cube? I still have three cubes throwing 100Ghs into the network making $1 a day....lol
More accurate would be to point every box as separate worker.
Please be aware that ghash is very unstable and you can have more profit using other pool. just push miners to let say btcguild or eligius and see yourself.
Ghash is so unstable, spikes , hash is lover than reported in GUI.
Just thought.
Please be aware that ghash is very unstable and you can have more profit using other pool. just push miners to let say btcguild or eligius and see yourself.
Ghash is so unstable, spikes , hash is lover than reported in GUI.
Just thought.
I mine at polmine
, love PPS 1% and merged mining and many fancy stuff like belowbut didnt have time to setup proxy for those tubes so i mine at ghash with them
More accurate would be to point every box as separate worker.
Please be aware that ghash is very unstable and you can have more profit using other pool. just push miners to let say btcguild or eligius and see yourself.
Ghash is so unstable, spikes , hash is lover than reported in GUI.
Just thought.
Please be aware that ghash is very unstable and you can have more profit using other pool. just push miners to let say btcguild or eligius and see yourself.
Ghash is so unstable, spikes , hash is lover than reported in GUI.
Just thought.
thank you for info.
new pictures
and new location
new pictures
and new location
Looks like they are all daisy chained to the controller into one port?
Can you break the chain into 2 or three chains? That would protect from a bad board knocking
you totally out.
Just a thought.
as an old network dude, I hate bus topology (especially daisy chain). Star is your friend.
Can you break the chain into 2 or three chains? That would protect from a bad board knocking
you totally out.
Just a thought.
as an old network dude, I hate bus topology (especially daisy chain). Star is your friend.
it is not like this.
i had one tube offline at chain (unplugged due to power loss) and rest is working
one cutoff dont slice chain, just signals pass the dead tube
dont forget to reset/power on/off controller after adding/powering on tubes
One of the other people in the GB posted that his would not start until bad board's were removed
thus my assumption.
Looks like they are all daisy chained to the controller into one port?
Can you break the chain into 2 or three chains? That would protect from a bad board knocking
you totally out.
Just a thought.
as an old network dude, I hate bus topology (especially daisy chain). Star is your friend.
Can you break the chain into 2 or three chains? That would protect from a bad board knocking
you totally out.
Just a thought.
as an old network dude, I hate bus topology (especially daisy chain). Star is your friend.
it is not like this.
i had one tube offline at chain (unplugged due to power loss) and rest is working
one cutoff dont slice chain, just signals pass the dead tube
dont forget to reset/power on/off controller after adding/powering on tubes
One of the other people in the GB posted that his would not start until bad board's were removed
thus my assumption.
Looks like they are all daisy chained to the controller into one port?
Can you break the chain into 2 or three chains? That would protect from a bad board knocking
you totally out.
Just a thought.
as an old network dude, I hate bus topology (especially daisy chain). Star is your friend.
Can you break the chain into 2 or three chains? That would protect from a bad board knocking
you totally out.
Just a thought.
as an old network dude, I hate bus topology (especially daisy chain). Star is your friend.
it is not like this.
i had one tube offline at chain (unplugged due to power loss) and rest is working
one cutoff dont slice chain, just signals pass the dead tube
dont forget to reset/power on/off controller after adding/powering on tubes
Hope you don't have a feline
Im sure it would love to play with all them wires !
I didn't check availability on S3's, saw they were being sold in forums for $349 (probably late delivery as you said) or .6? used.
Hope those things hold up better than my cube did.
Im sure it would love to play with all them wires !
I didn't check availability on S3's, saw they were being sold in forums for $349 (probably late delivery as you said) or .6? used.
Hope those things hold up better than my cube did.
october delivery, no thanks
at october my miners would be replaced with newer ones
like i usually do
but i allways put aside one miner as collectible, some of miners are at shelf now
Looks like they are all daisy chained to the controller into one port?
Can you break the chain into 2 or three chains? That would protect from a bad board knocking
you totally out.
Just a thought.
as an old network dude, I hate bus topology (especially daisy chain). Star is your friend.
Can you break the chain into 2 or three chains? That would protect from a bad board knocking
you totally out.
Just a thought.
as an old network dude, I hate bus topology (especially daisy chain). Star is your friend.
Hope you don't have a feline
Im sure it would love to play with all them wires !
I didn't check availability on S3's, saw they were being sold in forums for $349 (probably late delivery as you said) or .6? used.
Hope those things hold up better than my cube did.
Im sure it would love to play with all them wires !
I didn't check availability on S3's, saw they were being sold in forums for $349 (probably late delivery as you said) or .6? used.
Hope those things hold up better than my cube did.
Looks like the S3 is a better deal as its price is dropping. Buy 2. Lower power consumption, higher hash (2 units). Dosnt need any
controller that further needs a proxy to fix it's flawed communications.
Plus I don't like that the boards are serial daisy chained. bad board takes out others behind it.
Not to mention crappy controller or issue of 'pool" fixing solution go'es south and you take out up to 4 units.
each S3 is stand alone direct to a pool.
AM should stick to chips and let others do the miner engineering. They proved that with the lemon cube.
controller that further needs a proxy to fix it's flawed communications.
Plus I don't like that the boards are serial daisy chained. bad board takes out others behind it.
Not to mention crappy controller or issue of 'pool" fixing solution go'es south and you take out up to 4 units.
each S3 is stand alone direct to a pool.
AM should stick to chips and let others do the miner engineering. They proved that with the lemon cube.
But... you have to wait till end of sept for ants
and they are more expensive
here is photo of part of my farm
yeah this gets about a .3btc head start in coin over 1 pair of s-3's and it is a little cheaper 1.04 btc and say .06 to ship a total of 1.10 btc vs 1.16 btc that means this has a .36 btc edge over the s-3. If you plan to mine this for 3 or 4 weeks and then sell it on ebay it is absolutely better then an s-3. if you just want to mine for 6 months the s-3 may be better.
Looks like the S3 is a better deal as its price is dropping. Buy 2. Lower power consumption, higher hash (2 units). Dosnt need any
controller that further needs a proxy to fix it's flawed communications.
Plus I don't like that the boards are serial daisy chained. bad board takes out others behind it.
Not to mention crappy controller or issue of 'pool" fixing solution go'es south and you take out up to 4 units.
each S3 is stand alone direct to a pool.
AM should stick to chips and let others do the miner engineering. They proved that with the lemon cube.
controller that further needs a proxy to fix it's flawed communications.
Plus I don't like that the boards are serial daisy chained. bad board takes out others behind it.
Not to mention crappy controller or issue of 'pool" fixing solution go'es south and you take out up to 4 units.
each S3 is stand alone direct to a pool.
AM should stick to chips and let others do the miner engineering. They proved that with the lemon cube.
But... you have to wait till end of sept for ants
and they are more expensive
here is photo of part of my farm
Looks like the S3 is a better deal as its price is dropping. Buy 2. Lower power consumption, higher hash (2 units). Dosnt need any
controller that further needs a proxy to fix it's flawed communications.
Plus I don't like that the boards are serial daisy chained. bad board takes out others behind it.
Not to mention crappy controller or issue of 'pool" fixing solution go'es south and you take out up to 4 units.
each S3 is stand alone direct to a pool.
AM should stick to chips and let others do the miner engineering. They proved that with the lemon cube.
controller that further needs a proxy to fix it's flawed communications.
Plus I don't like that the boards are serial daisy chained. bad board takes out others behind it.
Not to mention crappy controller or issue of 'pool" fixing solution go'es south and you take out up to 4 units.
each S3 is stand alone direct to a pool.
AM should stick to chips and let others do the miner engineering. They proved that with the lemon cube.
So to not use ghash.io you have to buy another piece of hardware?
if you don't already have something else to run it on.
You would think they would just fix their crappy firmware!!
So to not use ghash.io you have to buy another piece of hardware?
I haven't jumped on this yet because I can't see myself buying a miner that will only work on ghash...I think it's rather ironic that for all the 'stop using ghash' threads on here this is the only pool this beast will work with.
Didn't they test it with any other pools before unleashing it?
weird...JMO
ig
Didn't they test it with any other pools before unleashing it?
weird...JMO
ig
Friedcat posted a guide for using bfgminer. Mine is working on Eligius right now.
Ref:
https://bitcointalksearch.org/topic/m.8549984
I haven't jumped on this yet because I can't see myself buying a miner that will only work on ghash...I think it's rather ironic that for all the 'stop using ghash' threads on here this is the only pool this beast will work with.
Didn't they test it with any other pools before unleashing it?
weird...JMO
ig
Didn't they test it with any other pools before unleashing it?
weird...JMO
ig
Got my units hashing.
Shipment with controllers arrived today.
I will post more tommorow.
Shipment with controllers arrived today.
I will post more tommorow.
No on P2Pool. Not sure if anyone's had success with any other pool but Ghash?
You can read up Dogie's review detailing the fan noise. Apparently loud-ish, but higher pitched or something along those lines.
You can read up Dogie's review detailing the fan noise. Apparently loud-ish, but higher pitched or something along those lines.
How loud are these compared to, say, an Antminer S1?
Do you know if they work with p2pool?
Thanks.
Do you know if they work with p2pool?
Thanks.
I assume you bought in Canary's group buy? Wonder if I order one right now if he can have it here by Wednesday also?
Yeah I did. If you get him the shipping labels ASAP he might ship them out tomorrow and you could overnight them.
I assume you bought in Canary's group buy? Wonder if I order one right now if he can have it here by Wednesday also?
So has anyone had these setup and hashing yet? I was thinking of buying one just because they looked kind of cool and that you build them. I have not seen anyone say that they work...just that they take 15 minutes to build 
I should know Wednesday how well they work. Not too crazy about the controller.
So has anyone had these setup and hashing yet? I was thinking of buying one just because they looked kind of cool and that you build them. I have not seen anyone say that they work...just that they take 15 minutes to build
Very nice where can we order and can we tell as a price
Click on this quote.
Very nice where can we order and can we tell as a price
nice LIDL bag
Don't know how many you have left but could you time yourself as you put one together as quickly as possible and report how long it takes here? Thanks
it takes about 15 minutes to assemble this.
it looks difficult but it is easy after first one.
unfortunatelly i cant report any unit working yet.
i have issues not related to miner itself.
Any solution to this yet? 0/10 is pretty poor yeild. Either you are doing something completely wrong or AM is sending incorrect parts.
Which part of "i have issues not related to miner itself." did you not capture?
Solution will be soon.
I am not noob, got hundreds of diffrent miners connected, used and sold.
I am sure that units will be hashing soon.
Patience, please.
thanks.
I am not noob, got hundreds of diffrent miners connected, used and sold.
I am sure that units will be hashing soon.
Patience, please.
thanks.
Don't know how many you have left but could you time yourself as you put one together as quickly as possible and report how long it takes here? Thanks
it takes about 15 minutes to assemble this.
it looks difficult but it is easy after first one.
unfortunatelly i cant report any unit working yet.
i have issues not related to miner itself.
Any solution to this yet? 0/10 is pretty poor yeild. Either you are doing something completely wrong or AM is sending incorrect parts.
Don't know how many you have left but could you time yourself as you put one together as quickly as possible and report how long it takes here? Thanks
it takes about 15 minutes to assemble this.
it looks difficult but it is easy after first one.
unfortunatelly i cant report any unit working yet.
i have issues not related to miner itself.
Iit took 17 minutes to put one together with everything laid out, once I know how to do it. Since then I have spent an additional hour & 30 minutes each trying to get them to work correctly. The time spent getting them to run is on going as I don't have 1 running yet.
Told a few different things to check & go over by fc, which I will be doing once I get into office today. Will update if I can get them running
Told a few different things to check & go over by fc, which I will be doing once I get into office today. Will update if I can get them running
Don't know how many you have left but could you time yourself as you put one together as quickly as possible and report how long it takes here? Thanks
thank you for this link
i wil post when i will have my units hashing
now i have to hold on with this
i wil post when i will have my units hashing
now i have to hold on with this
http://www.iasicminer.com/index.php/action-viewnews-itemid-51
AM Tube setup instructions posted today. Not in english, but lots of photos.
AM Tube setup instructions posted today. Not in english, but lots of photos.
too late for me
will try tommorow morning.
it turned to be one faulty board (used as second in chain) confusing me.
or maybe something else?
assembly and running is best fun for miners
thats why i spent my fiat into thoose miners, i am glad exchange rate was low :>
bought gardens using btc few weeks ago at rate 624, heh
will try tommorow morning.
it turned to be one faulty board (used as second in chain) confusing me.
or maybe something else?
assembly and running is best fun for miners
thats why i spent my fiat into thoose miners, i am glad exchange rate was low :>
bought gardens using btc few weeks ago at rate 624, heh
This is very interesting! Good to see that the tubes get shipped and already are in the hands of some miners. I hope you don't connect the wrong wires and fry the cat miner!
Oh friedcat, could you give us a heads up on the self-mining please?
Oh friedcat, could you give us a heads up on the self-mining please?
yes i have read it
but there is no answer to my questions
how to connect boards by white cable ?
wchich number of miner is one with controller ?
https://bitcointalksearch.org/topic/m.8475122
thanks
The last one's cable goes into controller.but there is no answer to my questions
how to connect boards by white cable ?
wchich number of miner is one with controller ?
https://bitcointalksearch.org/topic/m.8475122
thanks
Or another way, I think, the controller can accept 3 connections. But I think each connection is independent. So dip switches are for 1 chain
can you tell me how to connect white cables to boards ?
1-4 ab
https://bitcointalksearch.org/topic/m.8475122
thanks
4a to 3b. 3a to 2b. 2a to 1b. 1a to controller.
make sure what you believe is 4, has dip switches set for 4. 3 has switches for 3 etc...
yes i have read it
but there is no answer to my questions
how to connect boards by white cable ?
wchich number of miner is one with controller ?
https://bitcointalksearch.org/topic/m.8475122
thanks
The last one's cable goes into controller.but there is no answer to my questions
how to connect boards by white cable ?
wchich number of miner is one with controller ?
https://bitcointalksearch.org/topic/m.8475122
thanks
Or another way, I think, the controller can accept 3 connections. But I think each connection is independent. So dip switches are for 1 chain
can you tell me how to connect white cables to boards ?
1-4 ab
https://bitcointalksearch.org/topic/m.8475122
thanks
yes i have read it
but there is no answer to my questions
how to connect boards by white cable ?
wchich number of miner is one with controller ?
https://bitcointalksearch.org/topic/m.8475122
thanks
The last one's cable goes into controller.but there is no answer to my questions
how to connect boards by white cable ?
wchich number of miner is one with controller ?
https://bitcointalksearch.org/topic/m.8475122
thanks
Or another way, I think, the controller can accept 3 connections. But I think each connection is independent. So dip switches are for 1 chain
yes i have read it
but there is no answer to my questions
how to connect boards by white cable ?
wchich number of miner is one with controller ?
https://bitcointalksearch.org/topic/m.8475122
thanks
but there is no answer to my questions
how to connect boards by white cable ?
wchich number of miner is one with controller ?
https://bitcointalksearch.org/topic/m.8475122
thanks
Did you check out Dogie's guide for the HashRatio Tsunami that is also based on AM's open source x24 reference design?
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-hashratio-tsunami-setup-hd-723445
^^ this and you also need to flash firmware to boards once everything is wired correctly https://bitcointalksearch.org/topic/guide-dogies-comprehensive-hashratio-tsunami-setup-hd-723445
Did you check out Dogie's guide for the HashRatio Tsunami that is also based on AM's open source x24 reference design?
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-hashratio-tsunami-setup-hd-723445
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-hashratio-tsunami-setup-hd-723445
got 6 miners assembled but i cant get them working
how they should be wired? i mean white transfer cable, and long one to controller
board 1
1a 1b
board 2
2a 2b
board 3
3a 3b
board 4
4a 4b
where a is socket nearest to fan
1a->2b 2a->3b 3a->4b 4a->controller?
i am testing it and it takes long time...
and how switches should be set if there is only 4 boards
and 8
nuber 1 is this one with controller ?
thanks
ps. sorry but this miner is not so easy to setup without detailed guide
how they should be wired? i mean white transfer cable, and long one to controller
board 1
1a 1b
board 2
2a 2b
board 3
3a 3b
board 4
4a 4b
where a is socket nearest to fan
1a->2b 2a->3b 3a->4b 4a->controller?
i am testing it and it takes long time...
and how switches should be set if there is only 4 boards
and 8
nuber 1 is this one with controller ?
thanks
ps. sorry but this miner is not so easy to setup without detailed guide
what's the dip switch used for?
For running multiple miners off one ethernet controller. See section 5 of Dogie's guide:
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-hashratio-tsunami-setup-hd-723445
Over engineering if you ask me for something you set up once and never touch again till the electricity bill is too high.
what's the dip switch used for?
For running multiple miners off one ethernet controller. See section 5 of Dogie's guide:
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-hashratio-tsunami-setup-hd-723445
what's the dip switch used for?
For running multiple miners off one ethernet controller. See section 5 of Dogie's guide:
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-hashratio-tsunami-setup-hd-723445
what's the dip switch used for?
Once it will work, it would be very much appreciated if you could mesure the sound level of it.
Thx !
Thx !
thanks for this.
i will change it.
unit is not hashing unfortunatelly yet.
maybe i messed up with connection cables.
i will try to fix it in 2 hours from now.
i will change it.
unit is not hashing unfortunatelly yet.
maybe i messed up with connection cables.
i will try to fix it in 2 hours from now.
Do not forget to insert the ivory color washer (4 per device) between
the handle and the fan when screwing the fan onto the cooling kit.
It serves the protection of the PCB when screwing.
the handle and the fan when screwing the fan onto the cooling kit.
It serves the protection of the PCB when screwing.
No problem it is pleasure to create pictures
thermal paste is replaced with thermal pads easy to apply.
some pictures after dinner break
thermal paste is replaced with thermal pads easy to apply.
some pictures after dinner break
Handles are backwards Looks very nice, I'm interested to see how these do. I've got mine on order with Canary right now.
Does the thermal paste come in a tube on the side?
Looks very nice, I'm interested to see how these do. I've got mine on order with Canary right now.Does the thermal paste come in a tube on the side?
Would appreciate additional pictures as you assemble them, thanks for doing this.
Tube is almost ready
without pcb
edit,
i messed up
without pcb
edit,
i messed up
i have paid at friday night, got package at tuesday at my airport (EU)
customs like usually were annoying but it was cleared due to great help of friedcat team!
Just got them from airport
Have electronic screwdriver so it will be fast.
I think/hope about 20min per miner
customs like usually were annoying but it was cleared due to great help of friedcat team!
Just got them from airport
Have electronic screwdriver so it will be fast.
I think/hope about 20min per miner
u think number 13 will be lucky for you?
amounts of parts is massive. from delivery to mining how long? 2 days? plus if you have big fingers you screwed
good luck buddy.
amounts of parts is massive. from delivery to mining how long? 2 days? plus if you have big fingers you screwed
good luck buddy.
Hi
Just got my packages from friedcat.
It consist of 13 boxes.
Review and detailed guide on the way.
assembly photo
got from
https://github.com/blockerupter/AM_Tube/blob/master/assembly.png
I will try to make working miner using this:
https://www.youtube.com/watch?v=P3U4ZHTmeKk
and
https://www.youtube.com/watch?v=V0My2bNWlAU
Have look at photos before assembly.
Just got my packages from friedcat.
It consist of 13 boxes.
Review and detailed guide on the way.
assembly photo
got from
https://github.com/blockerupter/AM_Tube/blob/master/assembly.png
I will try to make working miner using this:
https://www.youtube.com/watch?v=P3U4ZHTmeKk
and
https://www.youtube.com/watch?v=V0My2bNWlAU
Have look at photos before assembly.
Jump to: