The CPU connector - if your CPU is low power, then it should be safe enough (since the motherboard manual specifically MENTIONS it) to just use a 4-pin CPU connection instead of an 8-pin.
The molex connectors are intended to power the PCI-E bus connectors for use with non-powered risers.
Topic: AsRock H81 Pro BTC R2 - Do we connect both ATX power on Motherboard? (Read 390 times)
October 18, 2017, 04:31:47 PM
October 14, 2017, 07:53:06 AM
Without the 4 pin the Motherboard will not work, so that is REQUIRED
October 13, 2017, 06:11:03 PM
Do you mean the two molex connectors?
or
the 4-pin CPU power connector?
For the molex it is not necessary to connect them if you are using powered risers
For the 4-pin CPU, IT IS REQUIRED as the other guys have told you
or
the 4-pin CPU power connector?
For the molex it is not necessary to connect them if you are using powered risers
For the 4-pin CPU, IT IS REQUIRED as the other guys have told you
October 13, 2017, 05:46:32 PM
That 8-pin connector is what powers your CPU - IT IS REQUIRED NOT OPTIONAL.
According to the manual, you can also use a 4-pin CPU power connector.
Quote
This motherboard provides an 8-pin ATX 12V power connector. To use a 4-pin ATX power supply, please plug it along Pin 1 and Pin 5.
October 13, 2017, 05:41:25 PM
That 8-pin connector is what powers your CPU - IT IS REQUIRED NOT OPTIONAL.
October 13, 2017, 12:18:32 AM
Hello Friends,
Currently i have both ATX power connected on my motherboard.
Should we connect them both.. or just connect the 24 Pin ATX Power.. and not the 8 Pin ATX12V1 Power on motherboard
Thanks....
Currently i have both ATX power connected on my motherboard.
Should we connect them both.. or just connect the 24 Pin ATX Power.. and not the 8 Pin ATX12V1 Power on motherboard
Thanks....
Jump to: