Author

Topic: Assistance in config antminer s1 (Read 504 times)

legendary
Activity: 3766
Merit: 1742
Join the world-leading crypto sportsbook NOW!
May 16, 2014, 02:49:05 PM
#7
you could also go into your router and look at the dhcp tables and try some of the addresses listed there. I had the same problem when i purchased mine used and they weren't set to static ip addresses so i looked at the dhcp table and typed in a couple of the addresses till i found it, think i got it on the second attempt Good Luck

unfortunatly a lot of routers when the ip is static (for ex. in the standard config of the s1, 192.168.1.99) don't show on the dhcp page the device.
newbie
Activity: 21
Merit: 0
May 16, 2014, 07:21:59 AM
#6
you could also go into your router and look at the dhcp tables and try some of the addresses listed there. I had the same problem when i purchased mine used and they weren't set to static ip addresses so i looked at the dhcp table and typed in a couple of the addresses till i found it, think i got it on the second attempt Good Luck
legendary
Activity: 3766
Merit: 1742
Join the world-leading crypto sportsbook NOW!
May 15, 2014, 03:54:11 AM
#5
What is your network subnet?
KWH
legendary
Activity: 1904
Merit: 1045
In Collateral I Trust.
May 14, 2014, 11:10:22 PM
#4
yes there is, but that IP address doesn't work.


regards
rafmed

I'll send you a PM with some set up help.
newbie
Activity: 2
Merit: 0
May 14, 2014, 11:08:47 PM
#3
yes there is, but that IP address doesn't work.


regards
rafmed
KWH
legendary
Activity: 1904
Merit: 1045
In Collateral I Trust.
May 14, 2014, 10:57:56 PM
#2
Hi all,

I'm having a problem connecting to be able to configuring my Antminer S1.
I can't seem to find the Ip address for it.
I've connected the Antminer to my Desktop via ethernet cable to config and no luck.
I then connected the Antminer to my router and downloaded Ip address search software to find the IP address for the Antminer and nothing has come up.
i've turned off firewall on the router and the desktop.
All the lights on the Antminer are turn on.

i'm thinking i need to reset it. really no idea.

Any help would be much appreciated

regards
Rafmed

Is there not a sticker with the IP on it?
newbie
Activity: 2
Merit: 0
May 14, 2014, 10:29:52 PM
#1
Hi all,

I'm having a problem connecting to be able to configuring my Antminer S1.
I can't seem to find the Ip address for it.
I've connected the Antminer to my Desktop via ethernet cable to config and no luck.
I then connected the Antminer to my router and downloaded Ip address search software to find the IP address for the Antminer and nothing has come up.
i've turned off firewall on the router and the desktop.
All the lights on the Antminer are turn on.

i'm thinking i need to reset it. really no idea.

Any help would be much appreciated

regards
Rafmed
Jump to: