Topic: ASUS 1080 (ROG STRIX-GTX1080-A8G) multiple GPU not seen by mobo (Read 102 times)
After hours and hours of trying and switching all the components it was a GPU power cable which has "intermittent" fault.
January 29, 2018, 08:39:47 AM
It is not a BIOS restriction. Jeez, even gamers run 2 cards......
I think it is more likely a BIOS setting issue, Biostar for instance require you set a "mining mode" switch in the BIOS.
With no experience on (although have a 50% complete build on the Asrock H110) specific boards it is hard to say, but don't be too deterred, I am 99.9% sure its not the cards that are the issue.
Are you using 390.65? The install on multiple cards can take a while, when you add a 2nd does it show as "Basic Display" or "VGA controller?" or not at all?
I think it is more likely a BIOS setting issue, Biostar for instance require you set a "mining mode" switch in the BIOS.
With no experience on (although have a 50% complete build on the Asrock H110) specific boards it is hard to say, but don't be too deterred, I am 99.9% sure its not the cards that are the issue.
Are you using 390.65? The install on multiple cards can take a while, when you add a 2nd does it show as "Basic Display" or "VGA controller?" or not at all?
Gamers link the cards in SLI, i'm using risers, this is different.
The OS (win or linux) sees only 1 GPU, 2nd one is not there ... however ... if i plug-in the power adapter only into 8 pins connector on GPU (leaving the 6 pins connector empty) the OS sees all GPU just that they are unusable.
Ill keep trying, thanks
January 29, 2018, 08:30:31 AM
It is not a BIOS restriction. Jeez, even gamers run 2 cards......
I think it is more likely a BIOS setting issue, Biostar for instance require you set a "mining mode" switch in the BIOS.
With no experience on (although have a 50% complete build on the Asrock H110) specific boards it is hard to say, but don't be too deterred, I am 99.9% sure its not the cards that are the issue.
Are you using 390.65? The install on multiple cards can take a while, when you add a 2nd does it show as "Basic Display" or "VGA controller?" or not at all?
I think it is more likely a BIOS setting issue, Biostar for instance require you set a "mining mode" switch in the BIOS.
With no experience on (although have a 50% complete build on the Asrock H110) specific boards it is hard to say, but don't be too deterred, I am 99.9% sure its not the cards that are the issue.
Are you using 390.65? The install on multiple cards can take a while, when you add a 2nd does it show as "Basic Display" or "VGA controller?" or not at all?
January 29, 2018, 07:02:37 AM
Hi All,
i just bought 5x ROG STRIX-GTX1080-A8G to build a mining rig.
but the mobo sees only 1 GPU, any of them but only one at once.
Ive tried with:
3 different mobo, with all the BIOS settings i could think / found on internet (each mobo has a different CPU and Memory):
ASRock H110 Pro BTC
ASRock Z97X Killer
Asus P5K
2 different PSU
10+ risers (to rule out risers fault)
Windows 10 & ETHOS
Could this be a nvidia vBios restriction?
Any suggestion that may help me resolve this is welcome :-)
Thank you
i just bought 5x ROG STRIX-GTX1080-A8G to build a mining rig.
but the mobo sees only 1 GPU, any of them but only one at once.
Ive tried with:
3 different mobo, with all the BIOS settings i could think / found on internet (each mobo has a different CPU and Memory):
ASRock H110 Pro BTC
ASRock Z97X Killer
Asus P5K
2 different PSU
10+ risers (to rule out risers fault)
Windows 10 & ETHOS
Could this be a nvidia vBios restriction?
Any suggestion that may help me resolve this is welcome :-)
Thank you
Jump to: