Hi,
when i add 4 RX580 cards, then all is ok, and the rig runs fine.
when i add a 5th RX580 card, it only shows a black screen with the cursor blinking at the top left, no BIOS messages.
Has anyone experienced and maybe have a solution for this? do i need a special setting in the BIOS?
I am using the 4 cards in the first block of slots, have the latest BIOS and the PSU is 1500W, so will easily run it.
Also, do i "have" to connect another PSU, if I want to run more than 6 cards?
The PSU should run more at least 8, according to my calculations.
when i add 4 RX580 cards, then all is ok, and the rig runs fine.
when i add a 5th RX580 card, it only shows a black screen with the cursor blinking at the top left, no BIOS messages.
Has anyone experienced and maybe have a solution for this? do i need a special setting in the BIOS?
I am using the 4 cards in the first block of slots, have the latest BIOS and the PSU is 1500W, so will easily run it.
Also, do i "have" to connect another PSU, if I want to run more than 6 cards?
The PSU should run more at least 8, according to my calculations.
In terms of the PSU qustion, it depends in part as to what cpu you have, what quality psu you have and any over volt/over clocking.
My advice would be to read a power meter like this: https://www.amazon.co.uk/KKmoon-Digital-Electricity-Electric-Monitoring-White/dp/B01GPUSOXI/ref=sr_1_4?ie=UTF8&qid=1527451907&sr=8-4&keywords=power+meter
Then you will know what you are actually drawing and you can work out at what point you need another PSU. You can also work out where your PSU is operating on it's efficiency curve which will be interesting too