I guess I can't get it lower than 1.175V then
-fankih-
Topic: ASUS DCII 6970 Which bios to go lower than 850MHz mem? (Read 1910 times)
Didn't work :/
I guess I can't get it lower than 1.175V then
-fankih-
I guess I can't get it lower than 1.175V then
-fankih-
I found my old Afterburner profile file and this is what is says. With this I could adjust the voltage. If that really doesn't help I'm out of tips.
[Startup]
CoreClk=0
MemClk=0
FanSpeed=0
CoreVoltageBoost=-1
[Settings]
uP6208_Detection = 1
VDDC_uP6208_Detection = 46H
[Startup]
CoreClk=0
MemClk=0
FanSpeed=0
CoreVoltageBoost=-1
[Settings]
uP6208_Detection = 1
VDDC_uP6208_Detection = 46H
Undervolting works great with reference cards. It a great way to lower temperatures and power consumption. This is not a reference cards so it might be difficult. Let's see what we can do.
Do not try SmartDoctor. I just can not explain how shitty program that is.
Lowering memory to 150MHz is safe. I always run my cards with memory at 150MHz. Stable for months.
About undervolting. I'm not sure if this works but you can try adding the following text to your hardware profile file
(.\Profiles\ VEN_1002&DEV_6899&SUBSYS_03 481043&REV_00&BUS_1&DEV_0&FN_0) I'm not 100% sure of that file name but let's hope it's there.
[Settings]
VDDC_uP6208_Detection = 46h
If there is this:
[Settings]
uP6208_Detection = 1
Delete it.
Let me know if it works.
Do not try SmartDoctor. I just can not explain how shitty program that is.
Lowering memory to 150MHz is safe. I always run my cards with memory at 150MHz. Stable for months.
About undervolting. I'm not sure if this works but you can try adding the following text to your hardware profile file
(.\Profiles\ VEN_1002&DEV_6899&SUBSYS_03 481043&REV_00&BUS_1&DEV_0&FN_0) I'm not 100% sure of that file name but let's hope it's there.
[Settings]
VDDC_uP6208_Detection = 46h
If there is this:
[Settings]
uP6208_Detection = 1
Delete it.
Let me know if it works.
Didn't help
-fankih-
What were the results then?
-fankih-
BSODs and other unexpected shutdowns.
Was that with AsusSmartDoctor? If it was, don't worry - it is completely normal
That's why it sucks.Msi Afterburner is the best over-/underclocking software out there.
Yep
What were the results then?
-fankih-
BSODs and other unexpected shutdowns.
Was that with AsusSmartDoctor? If it was, don't worry - it is completely normal
That's why it sucks.Msi Afterburner is the best over-/underclocking software out there.
What were the results then?
-fankih-
BSODs and other unexpected shutdowns.
Undervolting works great with reference cards. It a great way to lower temperatures and power consumption. This is not a reference cards so it might be difficult. Let's see what we can do.
Do not try SmartDoctor. I just can not explain how shitty program that is.
Lowering memory to 150MHz is safe. I always run my cards with memory at 150MHz. Stable for months.
About undervolting. I'm not sure if this works but you can try adding the following text to your hardware profile file
(.\Profiles\ VEN_1002&DEV_6899&SUBSYS_03 481043&REV_00&BUS_1&DEV_0&FN_0) I'm not 100% sure of that file name but let's hope it's there.
[Settings]
VDDC_uP6208_Detection = 46h
If there is this:
[Settings]
uP6208_Detection = 1
Delete it.
Let me know if it works.
Do not try SmartDoctor. I just can not explain how shitty program that is.
Lowering memory to 150MHz is safe. I always run my cards with memory at 150MHz. Stable for months.
About undervolting. I'm not sure if this works but you can try adding the following text to your hardware profile file
(.\Profiles\ VEN_1002&DEV_6899&SUBSYS_03 481043&REV_00&BUS_1&DEV_0&FN_0) I'm not 100% sure of that file name but let's hope it's there.
[Settings]
VDDC_uP6208_Detection = 46h
If there is this:
[Settings]
uP6208_Detection = 1
Delete it.
Let me know if it works.
ASUS makes great cards. Direct CUII rocks but not really for undervolting. Smart Doctor is a nightmare 
and my experiences with undervolting were bad.
and my experiences with undervolting were bad.What were the results then?
-fankih-
ASUS makes great cards. Direct CUII rocks but not really for undervolting. Smart Doctor is a nightmare and my experiences with undervolting were bad.
and my experiences with undervolting were bad. I got it running down to 180MHz, but I was afraid to go lower. Should I try to reach 150MHz? It shouldn't cause any harm right?
And any suggestions for setting the voltage? CGminer doesn't allow me to do it and MSI Afterburner's Voltage control is grayed out.
-fankih-
It won't do any harm, might just crash the display driver and/or restart the PC but nothing major. If you have already unlock the voltage control in Settings of MSI Afterburner, and it doesn't work, the only option left would be the awful ASUS SmartDoctor. But I don't recommend this. You should be able to manage with AB or even with your miner (CGminer does this). And any suggestions for setting the voltage? CGminer doesn't allow me to do it and MSI Afterburner's Voltage control is grayed out.
-fankih-
I got it running down to 180MHz, but I was afraid to go lower. Should I try to reach 150MHz? It shouldn't cause any harm right?
And any suggestions for setting the voltage? CGminer doesn't allow me to do it and MSI Afterburner's Voltage control is grayed out.
-fankih-
And any suggestions for setting the voltage? CGminer doesn't allow me to do it and MSI Afterburner's Voltage control is grayed out.
-fankih-
Btw have you managed to lower 1.175V too or is it just locked?
-fankih-
-fankih-
For fuck sake!!!
Thanks a lot!
Give me your wallet and I'll give you a small tip for that =)
-fankih-
Thanks a lot!
Give me your wallet and I'll give you a small tip for that =)
-fankih-
Try this:
Lower mem to 850Mhz
Close Afterburner
Open it again and you can lower further?
Repeat until you are done
OR
Lower to 850Mhz
Close Afterburner
Delete those profilefiles from C/program files/afterburner/profiles/VENxxxxx.cfg
Open Afterburner. It might say "you have to restart" just hit no.
This works with my 7970s. And also download the latest Afterburner. When installed you have to mos the cfg again wih those eula changes.
Lower mem to 850Mhz
Close Afterburner
Open it again and you can lower further?
Repeat until you are done
OR
Lower to 850Mhz
Close Afterburner
Delete those profilefiles from C/program files/afterburner/profiles/VENxxxxx.cfg
Open Afterburner. It might say "you have to restart" just hit no.
This works with my 7970s. And also download the latest Afterburner. When installed you have to mos the cfg again wih those eula changes.
I have tried MSI Afterburner with such .cfg adding:
[ATIADLHAL]
EnableUnofficialOverclocking = 1
UnofficialOverclockingEULA = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode = 2
AccessibilityCheckingPeriod = 0
And it just doesn't go lower than 850MHz
-fankih-
[ATIADLHAL]
EnableUnofficialOverclocking = 1
UnofficialOverclockingEULA = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode = 2
AccessibilityCheckingPeriod = 0
And it just doesn't go lower than 850MHz
-fankih-
Have you changed the MSI Afterburner (if you are using that, if not you should) EULA? If not, google msi afterburner eula and make the changes. Also change the unofficialoverclocking mode to 2 instead of 0 or 1.
Lower memory, close afterburner. Open afterburner and you should be able to lower the memory more. If not, before opening it again remove the files from c/program files/msi afterburner/profiles that have VEN text in the beginning.
I hope I made myself clear.
Lower memory, close afterburner. Open afterburner and you should be able to lower the memory more. If not, before opening it again remove the files from c/program files/msi afterburner/profiles that have VEN text in the beginning.
I hope I made myself clear.
Currently I'm using BIOS version 013.010.000.009.000000 and it allows me to underclock memory only down to 850MHz.
Which version I should try to go lower than that?
I found these:
http://www.techpowerup.com/vgabios/index.php?page=1&architecture=&manufacturer=&model=HD+6970&interface=&memSize=0
But I wouldn't like to go through every of those to try out.
Thanks in advance,
-fankih-
Which version I should try to go lower than that?
I found these:
http://www.techpowerup.com/vgabios/index.php?page=1&architecture=&manufacturer=&model=HD+6970&interface=&memSize=0
But I wouldn't like to go through every of those to try out.
Thanks in advance,
-fankih-
Jump to: