I have an ASUS Z270-AR with Celeron 3980, 8GB DDR4, 1200 watt PSU, and 6 VisionTek RX570 GPU.
When I connect the 6th card in Win10, I go into a continuous boot loop and have to remove it to get anywhere. I have done all BIOS settings from the previously linked YouTube video for this board, but I cannot get more than 5 to boot and function. I also tried going to Gen1 for the aforementioned BIOS Settings with no luck. I am getting 130 Mh/s from the 5 cards, and would love to pop over 150 with the sixth. Any advise would be welcome!!
Topic: Asus Prime Z270-AR 7 GPU's saphire nitro 470 4Gb 29.5Mh/s (Read 2563 times)
I have VisionTek RX 570s with Elpida memory and I can't figure out how to get over 25 mh/s with BIOS Mods. Any suggestions very welcome.
Performance timings.
I have VisionTek RX 570s with Elpida memory and I can't figure out how to get over 25 mh/s with BIOS Mods. Any suggestions very welcome.
Thank you
Enable 4G above, set primary GPU to auto and connect video cable to one of the GPU not iGPU. This should work. At least for me with 5 gpus worked just fine with Z270 Prime P. i have Asus prime z270-AR
7 gpu sapphire rx 470 4gb 29.5Mh/s total: 206.7Mh/s 912-940 watts at the wall
https://postimg.org/image/tn6cuw7rz/
https://postimg.org/image/j3j16y199/
7 gpu sapphire rx 470 4gb 29.5Mh/s total: 206.7Mh/s 912-940 watts at the wall
https://postimg.org/image/tn6cuw7rz/
https://postimg.org/image/j3j16y199/
I have ASUS Z270-AR motherboard but i can't get it to recognize more than 4 ASUS Rog Strix RX570 4GB GPU's, what bios settings do you have? How did you get it to recognize 6 GPU's?
Help
https://youtu.be/DR-FkpU2KfI
Thank you
i have Asus prime z270-AR
7 gpu sapphire rx 470 4gb 29.5Mh/s total: 206.7Mh/s 912-940 watts at the wall
https://postimg.org/image/tn6cuw7rz/
https://postimg.org/image/j3j16y199/
7 gpu sapphire rx 470 4gb 29.5Mh/s total: 206.7Mh/s 912-940 watts at the wall
https://postimg.org/image/tn6cuw7rz/
https://postimg.org/image/j3j16y199/
I have ASUS Z270-AR motherboard but i can't get it to recognize more than 4 ASUS Rog Strix RX570 4GB GPU's, what bios settings do you have? How did you get it to recognize 6 GPU's?
Help
https://youtu.be/DR-FkpU2KfI
i have Asus prime z270-AR
7 gpu sapphire rx 470 4gb 29.5Mh/s total: 206.7Mh/s 912-940 watts at the wall
https://postimg.org/image/tn6cuw7rz/
https://postimg.org/image/j3j16y199/
7 gpu sapphire rx 470 4gb 29.5Mh/s total: 206.7Mh/s 912-940 watts at the wall
https://postimg.org/image/tn6cuw7rz/
https://postimg.org/image/j3j16y199/
I have ASUS Z270-AR motherboard but i can't get it to recognize more than 4 ASUS Rog Strix RX570 4GB GPU's, what bios settings do you have? How did you get it to recognize 6 GPU's?
Help
excellent efficiency.
Have you tried an eighth card ?
Have you tried an eighth card ?
how long it been running ? can you share what mods ? plus i have the prime Z270-A do you think it will work ?
It's been running for a few days, but it's very stable,
Mod: TIMING(MHz) area copy 1625 timings to 1750, 1900 and 2000.
Yes, it should work on prime Z270-A
many thanks i'll try it , what's the mobo bios for it ?
Memory type? ASIC quality? Driver/BIOS version?
Nice build, have you tried connecting 8th card to that MBO?
Nice build, have you tried connecting 8th card to that MBO?
how long it been running ? can you share what mods ? plus i have the prime Z270-A do you think it will work ?
It's been running for a few days, but it's very stable,
Mod: TIMING(MHz) area copy 1625 timings to 1750, 1900 and 2000.
Yes, it should work on prime Z270-A
how long it been running ? can you share what mods ? plus i have the prime Z270-A do you think it will work ?
i have Asus prime z270-AR
7 gpu sapphire rx 470 4gb 29.5Mh/s total: 206.7Mh/s 912-940 watts at the wall
https://postimg.org/image/tn6cuw7rz/
https://postimg.org/image/j3j16y199/
7 gpu sapphire rx 470 4gb 29.5Mh/s total: 206.7Mh/s 912-940 watts at the wall
https://postimg.org/image/tn6cuw7rz/
https://postimg.org/image/j3j16y199/
Jump to: