asus r9 280x dc2t fan speed problem.

apulunas

newbie

Activity: 34

Merit: 0

Quote from: Kredence on February 11, 2014, 08:06:23 PM

I manually turn up the speed on my fans to 72%. (bearing issue with one of them...which I just broke)
You can do this from the AMD Catalyst Control Center. There is a drop down on the left for Performance and then AMD OverDrive. You'll find the manual fan settings in there.

i did, i set fan speed to %80, however it didn't help. the lower side of card got too hot (upper side is cooler) and gpu0 got sick again.

Kredence

newbie

Activity: 4

Merit: 0

I manually turn up the speed on my fans to 72%. (bearing issue with one of them...which I just broke)
You can do this from the AMD Catalyst Control Center. There is a drop down on the left for Performance and then AMD OverDrive. You'll find the manual fan settings in there.

apulunas

newbie

Activity: 34

Merit: 0

recently i bought an asus r9 280x dc2t because i know it's a good one to mine. however i encountered a weird problem. my fan speed stay same no matter how much card heats. i tried everything possible, chaning slots, changing power cables, (my psu is 1000w 80+ bronze and i have 2 280x on rig, nothing else).

when i run the script everything starts fine, even cgminer reads heat, fan rpm etc, but when i check with my bare hands and listen to the fans, i hear no change in fan speed of dc2t and asus heats much more than vapor-x (elpida), though numbers are fine in cgminer (60 C heat) dc2t gets sick (probably shut down because it reached 90+ C). anyone else?

Topic: asus r9 280x dc2t fan speed problem. (Read 1479 times)