I have had a similar issue. The blackdhain driver from AMD had a bug which made that I lost at least 4MH.
I uninstalled the AMD driver and loaded the beta version of the blockchain that has been released by AMD.
http://1stminingrig.com/ethereum-dag-hashrate-drop-fix-amd-official-mining-drivers-are-now-out/
Topic: Asus RX580 ROG Strix Gaming TOP OC / ETH very low hashrate (Read 245 times)
Recently I've build a computer for both personal use and mining purposes. I've installed the latest driver for the graphics card, also other drivers for my motherboard which is Asus ROG Strix X370-F Gaming. I'm using Ryzen 1700 and 8GB 3000 Mhz (running on 2400) HyperX RAM. GPU has a Hynix memory. My settings are below, but somehow I'm getting really bad hashrates. Can someone help me to figure out this problem? I made some research about this graphics card but it seems I've the lowest hashrate. If i hit "+" button in Claymore miner for 30 dcri I get 17.5 Mh/s for 100 dcri I get 19 Mh/s. I don't want to flash the BIOS (I think there must be another problem at least I should see 22+ and I would be happy with it). So what can cause this problem except not flashing the BIOS. As far as I can see, similar and even low profile cards in stock mode are getting better results.
My Claymore bat file is this:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MyAdressWasHere.RessaX -epsw x
https://ibb.co/czRvHG
My Claymore bat file is this:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MyAdressWasHere.RessaX -epsw x
https://ibb.co/czRvHG
What kind of memory do you have? You should really think about modding memory straps to really push the most amount of MH/s
I have Hynix memory. I'm using my computer for working too, if I mod the BIOS other working performence will go down and I don't want to flash it everytime (don't know if this is a good/bad thing to do). So, I want to hit the best score that I can without flashing the BIOS. I wonder if 22.5 Mh/s is the limit, I think it shouldn't be. I tried some overclocking settings but never managed to go further.
Recently I've build a computer for both personal use and mining purposes. I've installed the latest driver for the graphics card, also other drivers for my motherboard which is Asus ROG Strix X370-F Gaming. I'm using Ryzen 1700 and 8GB 3000 Mhz (running on 2400) HyperX RAM. GPU has a Hynix memory. My settings are below, but somehow I'm getting really bad hashrates. Can someone help me to figure out this problem? I made some research about this graphics card but it seems I've the lowest hashrate. If i hit "+" button in Claymore miner for 30 dcri I get 17.5 Mh/s for 100 dcri I get 19 Mh/s. I don't want to flash the BIOS (I think there must be another problem at least I should see 22+ and I would be happy with it). So what can cause this problem except not flashing the BIOS. As far as I can see, similar and even low profile cards in stock mode are getting better results.
My Claymore bat file is this:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MyAdressWasHere.RessaX -epsw x
My Claymore bat file is this:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MyAdressWasHere.RessaX -epsw x
What kind of memory do you have? You should really think about modding memory straps to really push the most amount of MH/s
Switch your driver to compute mode?
I didn't know that there is an option for this. That really helped, thank you!. Now it's 22.5 Mh/s. Is this a limit for this card or I can improve this without flashing BIOS?You can only OC memory, or try to play with -dcri value
Also, try to put -asm 2 in command line, works better for some cards
Interestingly, if I increase OC memory even slightly, hashrate drops drastically. I tried increasing dcri in the compute mode, it didn't help (which is interesting too because it was helping in gaming mode). Also -asm 2 gave 16 Mh/s too. I couldn't understand this card, it should be very similar with other RX580's. I think I'm still missing some point, maybe voltage/power? It would be great if someone who has the same card gives an answer.
Switch your driver to compute mode?
I didn't know that there is an option for this. That really helped, thank you!. Now it's 22.5 Mh/s. Is this a limit for this card or I can improve this without flashing BIOS?yes you can flash bios and get it upto 30mhs
and memory oc also plays an a part in increasing hashrate
Switch your driver to compute mode?
I didn't know that there is an option for this. That really helped, thank you!. Now it's 22.5 Mh/s. Is this a limit for this card or I can improve this without flashing BIOS?You can only OC memory, or try to play with -dcri value
Also, try to put -asm 2 in command line, works better for some cards
Switch your driver to compute mode?
I didn't know that there is an option for this. That really helped, thank you!. Now it's 22.5 Mh/s. Is this a limit for this card or I can improve this without flashing BIOS?
Switch your driver to compute mode?
Recently I've build a computer for both personal use and mining purposes. I've installed the latest driver for the graphics card, also other drivers for my motherboard which is Asus ROG Strix X370-F Gaming. I'm using Ryzen 1700 and 8GB 3000 Mhz (running on 2400) HyperX RAM. GPU has a Hynix memory. My settings are below, but somehow I'm getting really bad hashrates. Can someone help me to figure out this problem? I made some research about this graphics card but it seems I've the lowest hashrate. If i hit "+" button in Claymore miner for 30 dcri I get 17.5 Mh/s for 100 dcri I get 19 Mh/s. I don't want to flash the BIOS (I think there must be another problem at least I should see 22+ and I would be happy with it). So what can cause this problem except not flashing the BIOS. As far as I can see, similar and even low profile cards in stock mode are getting better results.
My Claymore bat file is this:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MyAdressWasHere.RessaX -epsw x
https://ibb.co/czRvHG
My Claymore bat file is this:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MyAdressWasHere.RessaX -epsw x
https://ibb.co/czRvHG
Jump to: