Topic: ATI FirePro M5800 (Read 2094 times)
I had to do something similar, it wants the drivers and SDK installed in a specific order, but certain driver versions don't want to work with certain SDK versions so I had to kinda try all of them, installing them randomly until I finally got it to work using the 2.2SDK and the 11.4 driver, I believe.
Bah, this is bizarre.
I managed to get it working on one laptop with the FirePro M5800. After uninstalling and reinstalling drivers and SDKs over and over somehow it started working. However I have a second laptop the exact same model/hardware when I installed the drivers and SDK it says OpenCL is not supported with the current drivers though they are the exact drivers from the first laptop. After messing with it for 2 hours like I did on the first, still not working, :|
I managed to get 60Mhash/s on the first Laptop with the FirePro M5800
I managed to get it working on one laptop with the FirePro M5800. After uninstalling and reinstalling drivers and SDKs over and over somehow it started working. However I have a second laptop the exact same model/hardware when I installed the drivers and SDK it says OpenCL is not supported with the current drivers though they are the exact drivers from the first laptop. After messing with it for 2 hours like I did on the first, still not working, :|
I managed to get 60Mhash/s on the first Laptop with the FirePro M5800
FirePro M5800 does support OpenCL. Beyond that, I don't know. Keep playing around with it. Try a restart, make sure you have the correct catalyst drivers.
Perhaps it's time to play around with Linux?
Perhaps it's time to play around with Linux?
You are going to want to use the 2.1 or 2.2 SDK because I think the 2.4 is 5-10% slower, but first things first. Do you know for sure if the card you have supports OpenCL? I know the site lists the card, but perhaps there was a mix up?
Hello,
I don't see any topics on the FirePro laptop graphics cards. I have an HP Elitebook with the Firepro M5800 and I saw on this page "https://en.bitcoin.it/wiki/Mining_hardware_comparison" That it can do 60Mhash/s on ubuntu.
I have installed the latest graphics drivers and the SDK 2.4 but in windows 7 it does not detect it as an OpenCL device it only detects the CPU as OpenCL. Does this mean the FirePro cannot be used in Windows 7 to mine? Or is there something else I need to install to get it to work?
I don't see any topics on the FirePro laptop graphics cards. I have an HP Elitebook with the Firepro M5800 and I saw on this page "https://en.bitcoin.it/wiki/Mining_hardware_comparison" That it can do 60Mhash/s on ubuntu.
I have installed the latest graphics drivers and the SDK 2.4 but in windows 7 it does not detect it as an OpenCL device it only detects the CPU as OpenCL. Does this mean the FirePro cannot be used in Windows 7 to mine? Or is there something else I need to install to get it to work?
Jump to: