Atiflash with more than 10 GPU ? | Bitcointalksearch.org

FP91G

legendary

Activity: 1736

Merit: 1071

Quote from: Bitbtc8 on May 12, 2021, 02:29:39 AM

You are doing it wrong, I've been warned several times to never have another GPU on board when you plan to flash bios because the app can be confused and you will end up bricking the GPUs, so do it one after the other, insert Just one GPU in your motherboard and flash it, repeat this process to be on safer side

Read the information about sewing the BIOS of a video card using hive OS or other Linux systems.
To do this, you only need PolarisBiosEditor, and the procedures for downloading the BIOS and firmware of the video card are conveniently done with the help of the Hive OS graphical interface.
Hive Os numbers the BIOS files of video cards according to the numbers on the dashboard so that you don't confuse them.

greg777777

newbie

Activity: 22

Merit: 0

You need use alternative flasher!!!
https://i.imgur.com/NS5TDD2.jpg

sxemini

member

Activity: 1558

Merit: 69

Quote from: fenixlz on May 11, 2021, 11:40:25 PM

Quote from: RYXES on March 07, 2018, 09:32:29 AM

For risk against bricking your GPUs, it is much better to flash your GPU cards one at a time.

I know it is a long and slow process but you only have to do it once each and then you're done to mine indefinitely.

Try and not cut corners when you're setting up your mining rig.

This is complete bullshit. You are talking about risks but then suggesting to switch off ALL the safety checks before flashing? I was flashing cards remotely for years and did not a single card was screwed up.

For the inital question. Just use new version, it is called AMDVBFLASH version 4.69. It flashes 10, 11, 12, etc. cards no problem.

The initial question is nearly 3 years old, i think he found his answer a long time ago Cheesy

Bitbtc8

full member

Activity: 1148

Merit: 116

You are doing it wrong, I've been warned several times to never have another GPU on board when you plan to flash bios because the app can be confused and you will end up bricking the GPUs, so do it one after the other, insert Just one GPU in your motherboard and flash it, repeat this process to be on safer side

fenixlz

newbie

Activity: 39

Merit: 0

Quote from: RYXES on March 07, 2018, 09:32:29 AM

For risk against bricking your GPUs, it is much better to flash your GPU cards one at a time.

I know it is a long and slow process but you only have to do it once each and then you're done to mine indefinitely.

Try and not cut corners when you're setting up your mining rig.

This is complete bullshit. You are talking about risks but then suggesting to switch off ALL the safety checks before flashing? I was flashing cards remotely for years and did not a single card was screwed up.

For the inital question. Just use new version, it is called AMDVBFLASH version 4.69. It flashes 10, 11, 12, etc. cards no problem.

wtfonly16

full member

Activity: 285

Merit: 105

i know how to flash 13 gpu system!!!
unplug 12 gpus and flash one by one.

EZ

!!!bonus points!!! if you have some beat up old pc, use that as a test bench. just slot ur gpu that needs to be flashed in and go! this pc can be ultra portable and compact so you can put it right beside ur rig, then just take usb slider cable and powercables from testbench and plug it in!!! dont even have to move the gpu!

huntingthesnark

member

Activity: 357

Merit: 26

Quote from: Bigdrago on April 01, 2018, 08:57:45 AM

Quote from: jmigdlc99 on April 01, 2018, 08:27:31 AM

Can't find any documentation on how to do this with more than 9 as well. Save yourself all the trouble and simply just do it on another PC with less GPUs. Borrow a PC if you dont have an extra one lying around. Much easier than flashing the wrong GPU, then have to deal with all the trouble of not being able to boot and all that.

Ok.
I am unable to attach a monitor since all is remote. Guess I have to disable 6 cards in device manager and flash 6+7 cards.
All cards have same memory.

As others have said, I really wouldn't try flashing a multi-card rig remotely. It is 'possible', but inevitably you'll flash the wrong bios and all hell will break loose. Really is better to do one at a time.

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

All you need to do is just unplug the riser from the Mobo PCIe slot and alternate to get the rest of the GPUs. Your GPUs don't need to be physically unplugged as that would require too much work if it's a tight setup when they are right next to each other.

If you can't stick your hand in the motherboard then you can also disconnect the GPU by unplugging the USB from the GPU side of the riser.

nitrobg

member

Activity: 413

Merit: 17

Quote from: Bigdrago on April 01, 2018, 07:08:02 AM

Quote from: yaaisinile on March 14, 2018, 05:45:22 AM

Quote from: fabry1999 on March 07, 2018, 06:39:13 AM

How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?

Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?

thx

use "atiflash -pa -fa -fm -fs -fp bios name" flash all AMD Card(1-9 and 10+ support)
like:
atiflash -pa -fa -fm -fs -fp asus588.rom

How is this going to discover more than 10 gpu?

-fa Force flashing bypassing already-programmed check.
-fm Force flashing bypassing BIOS memory config check.
-fs Force flashing bypassing BIOS SSID check.
-fp Force flashing bypassing BIOS P/N check.

Those forced commands are just bypassing safety checks. Don't use them unless you are completely sure that you know what you're doing.
The only necessary argument is -pa which flashes all cards with the selected bios.

samet_9511

jr. member

Activity: 81

Merit: 7

I have 12 GPU in a rig. All graphic cards are the same. How could I flash all of them in one shot ?

Bigdrago

newbie

Activity: 312

Merit: 0

Quote from: jmigdlc99 on April 01, 2018, 08:27:31 AM

Can't find any documentation on how to do this with more than 9 as well. Save yourself all the trouble and simply just do it on another PC with less GPUs. Borrow a PC if you dont have an extra one lying around. Much easier than flashing the wrong GPU, then have to deal with all the trouble of not being able to boot and all that.

Ok.
I am unable to attach a monitor since all is remote. Guess I have to disable 6 cards in device manager and flash 6+7 cards.
All cards have same memory.

jmigdlc99

sr. member

Activity: 784

Merit: 282

I was previously in the same boat as you and similarly wasn't able find any documentation on how to do this with more than 9 GPUs as well. Save yourself all the trouble and simply just do it on another PC with less GPUs. You could borrow a PC if you don't have an extra one lying around. Much easier than flashing the wrong GPU, then have to deal with all the trouble of not being able to boot and all that.

Bigdrago

newbie

Activity: 312

Merit: 0

Quote from: yaaisinile on March 14, 2018, 05:45:22 AM

Quote from: fabry1999 on March 07, 2018, 06:39:13 AM

How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?

Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?

thx

use "atiflash -pa -fa -fm -fs -fp bios name" flash all AMD Card(1-9 and 10+ support)
like:
atiflash -pa -fa -fm -fs -fp asus588.rom

How is this going to discover more than 10 gpu?

-fa Force flashing bypassing already-programmed check.
-fm Force flashing bypassing BIOS memory config check.
-fs Force flashing bypassing BIOS SSID check.
-fp Force flashing bypassing BIOS P/N check.

Bigdrago

newbie

Activity: 312

Merit: 0

Anyone solved this? I have 13 gpu I need to flash.

yaaisinile

newbie

Activity: 3

Merit: 0

Quote from: fabry1999 on March 14, 2018, 05:56:18 AM

Quote from: yaaisinile on March 14, 2018, 05:45:22 AM

Quote from: fabry1999 on March 07, 2018, 06:39:13 AM

How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?

Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?

thx

use "atiflash -pa -fa -fm -fs -fp bios name" flash all AMD Card(1-9 and 10+ support)
like:
atiflash -pa -fa -fm -fs -fp asus588.rom

I can't do in this way, as I wrote I have different card that use different bios

There's no way around it.,The tool could not identify more than 9 digits.

hack4love

newbie

Activity: 152

Merit: 0

Can you tell me what driver you using and what OS

baga105

sr. member

Activity: 362

Merit: 250

Then flash it 1 by 1. And you won't screw up

The slowest but the best way to do it.

fabry1999

full member

Activity: 279

Merit: 100

Quote from: yaaisinile on March 14, 2018, 05:45:22 AM

Quote from: fabry1999 on March 07, 2018, 06:39:13 AM

How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?

Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?

thx

use "atiflash -pa -fa -fm -fs -fp bios name" flash all AMD Card(1-9 and 10+ support)
like:
atiflash -pa -fa -fm -fs -fp asus588.rom

I can't do in this way, as I wrote I have different card that use different bios

yaaisinile

newbie

Activity: 3

Merit: 0

Quote from: fabry1999 on March 07, 2018, 06:39:13 AM

How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?

Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?

thx

use "atiflash -pa -fa -fm -fs -fp bios name" flash all AMD Card(1-9 and 10+ support)
like:
atiflash -pa -fa -fm -fs -fp asus588.rom

RYXES

member

Activity: 140

Merit: 10

Merit me or don't.

Quote from: fabry1999 on March 07, 2018, 06:39:13 AM

How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?

Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?

thx

For risk against bricking your GPUs, it is much better to flash your GPU cards one at a time.

I know it is a long and slow process but you only have to do it once each and then you're done to mine indefinitely.

Try and not cut corners when you're setting up your mining rig.

Njeroe

newbie

Activity: 48

Merit: 0

Quote from: fabry1999 on March 07, 2018, 06:39:13 AM

How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?

Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?

thx

Atiflash only supports one digit numbers, so turn off half the cards, then flash the other half...

RapBTC1

jr. member

Activity: 95

Merit: 1

Hi,

do you have try with CMD ? command prompt ?

fabry1999

full member

Activity: 279

Merit: 100

How I can flash AMD RX Card with Atiflash with more than 10 GPU of different type ?

Using the cli you can set the GPU ID from 0 to 9, how I can flash the 10-11 GPU ?

thx

Topic: Atiflash with more than 10 GPU ? (Read 563 times)