Topic: ATX Power Supply (Shorting Ground to PS On) (Read 916 times)
yes it should work.
It's correct, green with any black!
I'm pretty sure this is correct but I wanted to double check so I don't fry my PSU or any thing connected to it.
I have two cappers/jumpers, what ever you want to call them, to short the PS On pin to a Ground pin, but each connector is using a different pin for the ground connector.
I found this chart on pin-outs on a 24-pin ATX PSU:
http://pinouts.ru/Power/atx_v2_pinout.shtml
Both of the jumpers appear to be connecting pin 16 to either 18 or 15, which both are grounds.
So I should be good with either one correct?
I have two cappers/jumpers, what ever you want to call them, to short the PS On pin to a Ground pin, but each connector is using a different pin for the ground connector.
I found this chart on pin-outs on a 24-pin ATX PSU:
http://pinouts.ru/Power/atx_v2_pinout.shtml
Both of the jumpers appear to be connecting pin 16 to either 18 or 15, which both are grounds.
So I should be good with either one correct?
Jump to: