Topic: [AUCTION] 13Gh/s ASICMiner Block Erupter Blade. Starts @41btc (Read 2475 times)
You should consider this sold.
My offer still stands 
although the blade is well worth the 41BTC if someone wants to chime in.
although the blade is well worth the 41BTC if someone wants to chime in. 
Good luck with sale! ( Sorry, I posted before seeing the nonsense before had been deleted! )
It will make a ROI in 8-10 months. I have a blade right now, that is going to generate about 11 btc this month. Difficulty is already looking like it isn't going to be jumping up nearly as much as it did these last 2 periods, which will probably net me about 9btc next month. Month after that, lets say around 6btc to be on the safe side. So far in 3 months it will have made about 26btc.
The great things with ASICs is, even at 100million difficulty ( which is quite aways out ), the blade will still generate around 2btc a month of profit over the power it uses. To hit 100million difficulty, you need to take the current network hash rate of 140 Thashes, and times that by 5. That is not happening in the next 3 months, so you will be making more than 3btc per month after September, and for quite a few months after September as well.
Even at a 200 million difficulty, it will still be making a profit of around 1 btc a month over the power used ( profit is profit, so its a good investment regardless ) . and 200 million difficulty is a looonnnnnnggggggg ways out.
-Brian
The great things with ASICs is, even at 100million difficulty ( which is quite aways out ), the blade will still generate around 2btc a month of profit over the power it uses. To hit 100million difficulty, you need to take the current network hash rate of 140 Thashes, and times that by 5. That is not happening in the next 3 months, so you will be making more than 3btc per month after September, and for quite a few months after September as well.
Even at a 200 million difficulty, it will still be making a profit of around 1 btc a month over the power used ( profit is profit, so its a good investment regardless ) . and 200 million difficulty is a looonnnnnnggggggg ways out.
-Brian
Stop spamming the thread with nonsense.
I offer 30 with shipping included to the UK. John K as escrow (2% I'd pay separately).
I'd pay John as he receives a tracking number, and I'd inform him when the package arrives that everything is correct so he can release it.
Obviously this bid doesn't fit your minimum so you don't have to take it.
I offer 30 with shipping included to the UK. John K as escrow (2% I'd pay separately).
I'd pay John as he receives a tracking number, and I'd inform him when the package arrives that everything is correct so he can release it.
Obviously this bid doesn't fit your minimum so you don't have to take it.
[reserved]
**Auction**: 13 GH/s ASICMINER Block Erupter Blade unit.
Bids start at 41 BTC. Increments of 0.5 BTC. Buy it Now @46.99 BTC and get it immediately.
Timer removed. End time: 2013-06-19+14:00:0UTC
Bids start at 41 BTC. Increments of 0.5 BTC. Buy it Now @46.99 BTC and get it immediately.
Timer removed. End time: 2013-06-19+14:00:0UTC
Code:
Hashrate: baseline 10GHash/s, rated 10.752GHash/s,
Maximum 13GHash/s with overclocking and proper cooling
Power Consumption: 70-75W on 1.03-1.05V, 83W on 1.1V, 100W on 1.2V, 120W on 1.2V and overclocking
Hasher size: 233mm x 116mm with a 227mm x 100mm x 19mm heat sink attached to its back
Power module size: 192mm x 89mm
Ethernet controller size: 86mm x 40mm
Maximum 13GHash/s with overclocking and proper cooling
Power Consumption: 70-75W on 1.03-1.05V, 83W on 1.1V, 100W on 1.2V, 120W on 1.2V and overclocking
Hasher size: 233mm x 116mm with a 227mm x 100mm x 19mm heat sink attached to its back
Power module size: 192mm x 89mm
Ethernet controller size: 86mm x 40mm
TERMS & CONDITIONS
1. Buyer will pay within 24 hours of auctions' end.
2. Auction ends if someone "Buys it Now" @ 46.99 BTC
3. If required, we can escrow through John K (fees to be paid by buyer). I already provided him my personal info when I purchased the blade from friedcat. So no probs for me.
4. No low-ballers, please. I paid 49.99 for this blade @ $129/btc three weeks ago.
5. You can either PM me your offer or post it here in the thread.
6. Buyer pays the shipping. Shipment will be made (from Spain) the same or the next business day when payment is received. (DHL Express Recommended)
7. Non european bidders will have 1BTC discount for the extra shipping cost.
8. I reserve the right to cancel the auction/sale if the bids are too low, not satisfactory, or anything unexpected on the buyers side happens during the process.
Blade is still under ASICMINER *warranty* (six months from later May)
Please post your bids in the format: "
i.e: 41.5, shipment to Germany
Happy Bidding!!! 
Jump to: