Topic: [AUCTION] ASICMINER Blade Mounting Adapter Set (Read 5341 times)
Selling more on Bitmit for anyone else interested: https://www.bitmit.net/en/item/40292-asicminer-blade-mounting-set
All items sent to Ajay, pawelek and win07.
Thanks for fast shipping. Received the adapter and instuctions.
All items sent to Ajay, pawelek and win07.
Hi send btc tommorow 
Ok, so that is how the auction ended as well. I would ask all parties to send the agreed upon BTC to 1NcDiQVy5svk67stzDaBhvKbxQPtb9zPwc and PM me your addresses or set up escrow through some trusted party here.
Ajay - 0.8
pawelek - 0.3
win07 - 0.09
I don't need you to sign a message with your address.
Ajay - 0.8
pawelek - 0.3
win07 - 0.09
I don't need you to sign a message with your address.
Paid https://blockchain.info/nl/tx/ae3faa567aa1cd00840607847cf765c9edeeba4ef3a709bcd88a5be7c007d3b0
and send PM.
Ok, so that is how the auction ended as well. I would ask all parties to send the agreed upon BTC to 1NcDiQVy5svk67stzDaBhvKbxQPtb9zPwc and PM me your addresses or set up escrow through some trusted party here.
Ajay - 0.8
pawelek - 0.3
win07 - 0.09
I don't need you to sign a message with your address.
Ajay - 0.8
pawelek - 0.3
win07 - 0.09
I don't need you to sign a message with your address.
So with under half an hour left we have:
Ajay [email protected]
pawelek [email protected]
win07 [email protected]
I'd like to add a clause that the auction will be extended 3 minutes after the last bid.
Ajay [email protected]
pawelek [email protected]
win07 [email protected]
I'd like to add a clause that the auction will be extended 3 minutes after the last bid.
From my ASICMINER shares auction:
I will buy 1 asicminer for 25 btc.
1 @ 25 BTC
They are 13 GH/s?
They are 13 GH/s?
Since I can't edit my original post, here is how the bidding stands now:
Ajay [email protected]
pawelek 1@ 0.1
iamag [email protected]
Ajay [email protected]
pawelek 1@ 0.1
iamag [email protected]
i doubt pawelek really bidded, he just joined the forum and made one post after another
I contacted him via PM and he confirmed he is bidding on 1. I am in no position to disregard people just because they joined recently and am taking his bid seriously.
ok.. it was weird because he was bidding against himself ...
Yes i confirmed this
Since I can't edit my original post, here is how the bidding stands now:
Ajay [email protected]
pawelek 1@ 0.1
iamag [email protected]
Ajay [email protected]
pawelek 1@ 0.1
iamag [email protected]
i doubt pawelek really bidded, he just joined the forum and made one post after another
I contacted him via PM and he confirmed he is bidding on 1. I am in no position to disregard people just because they joined recently and am taking his bid seriously.
Since I can't edit my original post, here is how the bidding stands now:
Ajay [email protected]
pawelek 1@ 0.1
iamag [email protected]
Ajay [email protected]
pawelek 1@ 0.1
iamag [email protected]
i doubt pawelek really bidded, he just joined the forum and made one post after another
Since I can't edit my original post, here is how the bidding stands now:
Ajay [email protected]
pawelek 1@ 0.1
iamag [email protected]
Ajay [email protected]
pawelek 1@ 0.1
iamag [email protected]
pawelek, what the f**k are u doing here ? 
0.10 Btc
0.07 BTC
0.06 btc
4 @ 0.2
this would be perfect if you can redesign it and add additional mount for 2x 120mm fan in front of the heatsink similar to dogie's original setup photo. I didnt realize how big a pain in the **** it is to get this thing vertical then put 2 fans in front of it without touching the heatsink...
legos was my solution...
legos was my solution...
This is my newest newest setup now, rev 7 I think xD Wind tunnel design helps a LOT, conveys all the heat up and away. Everything much cooler and with lower fan speeds.
updating my bid to 2 @ 0.01
this would be perfect if you can redesign it and add additional mount for 2x 120mm fan in front of the heatsink similar to dogie's original setup photo. I didnt realize how big a pain in the **** it is to get this thing vertical then put 2 fans in front of it without touching the heatsink...
legos was my solution...
legos was my solution...
I have an idea for a fan mounting solution which would be separate (but compatible) from this but will wait to see the response for this item first.
Is it ABS? Should probably have set a decent min 
This thread made me procrastinate for 4 1/2 hours remounting my blades in a new vertical windtunnel mode 
This thread made me procrastinate for 4 1/2 hours remounting my blades in a new vertical windtunnel mode It is made from a type of polylactide which has approximately the same melting point as ABS but ABS starts to get weaker at a lower temperature (~50C I believe).
As to the decent min price comment, I am counting on the power of the free market which I will honor even at 0.01. If the price ends up too low I won't produce anymore.
this would be perfect if you can redesign it and add additional mount for 2x 120mm fan in front of the heatsink similar to dogie's original setup photo. I didnt realize how big a pain in the **** it is to get this thing vertical then put 2 fans in front of it without touching the heatsink...
legos was my solution...
legos was my solution...
I was thinking of building a mount out of wooden dowels, but then I had nightmares of it possibly catching fire and killing me in my sleep 
Is it ABS? Should probably have set a decent min This thread made me procrastinate for 4 1/2 hours remounting my blades in a new vertical windtunnel mode
This thread made me procrastinate for 4 1/2 hours remounting my blades in a new vertical windtunnel mode 
8 @ 0.01
Question : wont that plastic melt if the blade gets too hot ?
This plastic starts to get weak at ~100C. The melting point is 220C. I hope you don't run your blade at these temps
ok, cool .. well .. i placed my bid
Question : wont that plastic melt if the blade gets too hot ?
This plastic starts to get weak at ~100C. The melting point is 220C. I hope you don't run your blade at these temps
Question : wont that plastic melt if the blade gets too hot ?
1@ 0.01 BTC
Minimum bid?
3D printing FTW.
Too bad i don't have any blades.
Too bad i don't have any blades
.
Can't seem to edit my post. I forgot to mention minimum increment is 0.01 BTC.
I have ten sets (of two each) available to ship upon completion of this auction:
Escrow by reputable member of the community accepted.
FREE SHIPPING worldwide.
- Suitable for one BE Blade or chainable
- Maintains 55mm of space between blades
- 4mm holes for fastening
Questions?
Escrow by reputable member of the community accepted.
FREE SHIPPING worldwide.
- Suitable for one BE Blade or chainable
- Maintains 55mm of space between blades
- 4mm holes for fastening
Questions?
Jump to: