Topic: (AUS) Antminer r4, listed on ebay! (Read 1221 times)
antminer will be sold today due to a bidder! come get a bargain! will be gone in 2 hours
forgot i left some info out as well. the hashboard does not show up on the miner status in the miner's network. but the board is a little warm but isnt warm enough. i think the board is getting power but probably the chip itself is either not function or the soldering is melted.
i tried to push the little inductor in a bit while performing a test but still no work. so i'll probably eliminate that issue. it does feel loose but looks like it does attached properly. i had this miner running for just over 1 month and a few days from now just suddenly top half stop working. i dunno if its a heat issue that cause it to stop functioning as the room temperature was atleast 30c? been running like that for awhile. or the chip just suddenly died. 
even so im still selling it in ebay for auction. whoever wins is whoever i will give it to and they can break the warranty seal or do whatever they like. but i would love to break the seal but isnt a good idea. a month earlier i bought this off an ebayer so probably best to get his warranty. also i like to get the top half working before i post it wahhhh
even so im still selling it in ebay for auction. whoever wins is whoever i will give it to and they can break the warranty seal or do whatever they like. but i would love to break the seal but isnt a good idea. a month earlier i bought this off an ebayer so probably best to get his warranty. also i like to get the top half working before i post it wahhhh Is the inductor on the hash board loose / not attached properly?
See this picture:
https://i.imgur.com/7fGjuIQ.jpg
In this picture is a S9 hash board, but you should find same kind of a setup in the R4.
There has been a problem in several S9's with this component being loose and the miner showing a dead hash board.
See this picture:
https://i.imgur.com/7fGjuIQ.jpg
In this picture is a S9 hash board, but you should find same kind of a setup in the R4.
There has been a problem in several S9's with this component being loose and the miner showing a dead hash board.
I will try and see if i could get a fix on that. will report back to see if its working.
hello interested in buying your r4 .
plz reply
plz reply
Is the inductor on the hash board loose / not attached properly?
See this picture:
In this picture is a S9 hash board, but you should find same kind of a setup in the R4.
There has been a problem in several S9's with this component being loose and the miner showing a dead hash board.
See this picture:
In this picture is a S9 hash board, but you should find same kind of a setup in the R4.
There has been a problem in several S9's with this component being loose and the miner showing a dead hash board.
So what sort of price are you wanting for it now? Also have you got a screenshot of the GUI page?
pretty much! im sad it not running on full power. id rather not play around with it and let somebody else fix it.
So it's only running at half power as it's lost a hashing board?
Bump, Found out the top half does not work properly, gives error or maybe faulty, may have to take it to manufacturer for repairs orfix it yourself. my loss is your win, get a bargain
Yes pretty much in au doller 
so as ive listed currently for $2000 in au on ebay. i'll let it go for the amount of who has the highest bid. but i would really like to prefer to avoid paypal's fees and waiting time to receive the money also the ebay fees that would kick me in the ass. if anyone is outside au, i could send the items asap via aus post international in express. i highly doubt the express post ( should be atleast 3 to 5 days depends on the country) but i dont have any hope for these mailing services to do a proper job
so as ive listed currently for $2000 in au on ebay. i'll let it go for the amount of who has the highest bid. but i would really like to prefer to avoid paypal's fees and waiting time to receive the money also the ebay fees that would kick me in the ass. if anyone is outside au, i could send the items asap via aus post international in express. i highly doubt the express post ( should be atleast 3 to 5 days depends on the country) but i dont have any hope for these mailing services to do a proper job
You should put what currency you are selling it in because $3000 USD is way too much. I am guessing $3000 AUD which is like $2000 USD ?
Sorry my asking price is $3000 or 3 BTC at the very least.
I have put up an ebay http://www.ebay.com.au/itm/262704138320?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
It will be gone in less than 3 days
I have put up an ebay http://www.ebay.com.au/itm/262704138320?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
It will be gone in less than 3 days
What is your asking price?
it depends on how fast you want it.
here is what im using to post the item.
https://auspost.com.au/parcels-mail/calculate-postage-delivery-times/#/option/international/AU/GB?fromPostcode=4077
here is what im using to post the item.
https://auspost.com.au/parcels-mail/calculate-postage-delivery-times/#/option/international/AU/GB?fromPostcode=4077
Can you provide a shipping quote for the UK? I don't need the psu though. Thanks.
i dont mind. nothing for me to worry about. can supply pic with name on it. pay fees and maybe postage depends on where
Selling an r4 with the APW5 power supply which can hold in addition of another r4 or s9.
Selling from australia of course. used for about a month now. able to generate roughly 0.2 bitcoin in or less than a month.
http://www.ebay.com.au/itm/262704138320?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Can use ebay as an escrow. I would really prefer not to use paypal because of the fees and ebay fees kicking my ass. wire transfer, btc or paypal gift.
Got a bidder now and will be sold less then 2 day.
Selling from australia of course. used for about a month now. able to generate roughly 0.2 bitcoin in or less than a month.
http://www.ebay.com.au/itm/262704138320?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Can use ebay as an escrow. I would really prefer not to use paypal because of the fees and ebay fees kicking my ass. wire transfer, btc or paypal gift.
Got a bidder now and will be sold less then 2 day.
Jump to: