automatic clockspeed control | Bitcointalksearch.org

Hi *

Program name: AMDFC-V01.sh
What it does: Automatically adjust the clockspeed in relationship to fan speed.
Usage:

Code:

bash AMDFC-V01.sh  ==> bash AMDFC-V01.sh 0

Multi GPU support: Yes, start one task for each GPU in separeted terminals
License: GNU/GPL
Free?: yes, but I like donations Wink

1XCnjoSMGMXCzX4Wtb6U6Mdiz4JQXCjbV
Download: http://www.gallery.li/AMDFC-V01.sh

I created a small shell script to automatically adjust the clockspeed in relationship to fan speed.
You must define a temperature level and a desired fan speed and the programm will automatically adjust the clockspeed of your gpu and manage that your card does not overheat. <== NO WARRANTY....

Example:

Code:

# Define the temperature limits: Default: High 88, MID 80-87, Low <70
# > 88 ==> HIGH <== Everything above is to hot for me
tempHIGH=88
# 80-87 ==> MID <== The desired temperature where my card should work
tempMID=80
# < 80 ==> LOW <== to low - I can put the clock speed up
# tempLOW=autodefined by noisefc.sh

Ok now let us define the fan Levels:

Code:

# Define Fan Levels: Default: High 90, Mid 60, Low 50
fanHIGH=90
fanMID=60
fanLOW=50

Code:

#And our target fan speed. Let us choose MID ==> 60% <== wonderfull quiet ;)
targetfanspeed=${fanMID}

Ok the program checks all 10 seconds the status of my card. If the card is to hot (>HIGH = 88°) more then 3 times in a row, the programm switch to a "cool down mode". E.g. put down the clockspeed to 500 and put up the fan to 90% for 30 seconds. After this cool down the program adjust the clockspeed to clockspeed-30.

If the temperature is between HIGH (88°) and MID (80°) everything is ok.

If the temperature is to low
Why should this be usefull? Because it's nice if your GPU has the same temperature equal if the room temperature is 10° or 60°

Regards
Michael

P.S. I like donations:) 1XCnjoSMGMXCzX4Wtb6U6Mdiz4JQXCjbV

Topic: automatic clockspeed control (Read 1004 times)