Look at my troubleshooting guide and start looking at the cgminer api log in those bad boys.
I think you have some hashboard with high chip temperature.
You need to figure out which hashboards, by paying close attention to what is printed in the cgminer api log.
Removing the heat sink, cleaning it carefully with isopropyl alcohol and using a new good quality thermal paste may help you getting rid of the temperature issues.
Topic: Avalin 841 (Read 84 times)
Thanks so much for your guardians, I was able to run five to their normal has rate, but I wat I notice now its temperature
Please what did this mean sir:
39 / 111
41 / 109
41 / 98
0 / 115
I will appreciate ur guide as soon.
Thanks my Oga at the top
Please what did this mean sir:
39 / 111
41 / 109
41 / 98
0 / 115
I will appreciate ur guide as soon.
Thanks my Oga at the top
Ok
thanks so much.
I will test it one by one and reply back here
Thanks
thanks so much.
I will test it one by one and reply back here
Thanks
Can you test them one by one?
I think you have acquired a bunch of defective A841s,
but I'd figure out the defective ones by testing each unit one at time.
You can see cgminer api log for more detailed log about what's wrong with the miner.
You can see my troubleshooting guide for assistance.
I think you have acquired a bunch of defective A841s,
but I'd figure out the defective ones by testing each unit one at time.
You can see cgminer api log for more detailed log about what's wrong with the miner.
You can see my troubleshooting guide for assistance.
Would help if you post a screencap of your miner status page.
You can blur your addresses etc. before posting
You can blur your addresses etc. before posting
https://i.imgur.com/Lr2Xaxl.jpg
Would help if you post a screencap of your miner status page.
You can blur your addresses etc. before posting
You can blur your addresses etc. before posting
Thanks so much for your reply,
I discover in cgmi menu on GHSav, I can only see 19458.03 for elapsed of 13h 49m 11 s
Is there anything I have to install or anything I need to configure to run it to its full capacity?
I will appreciate your guidance.
Thanks
I discover in cgmi menu on GHSav, I can only see 19458.03 for elapsed of 13h 49m 11 s
Is there anything I have to install or anything I need to configure to run it to its full capacity?
I will appreciate your guidance.
Thanks
I have done few guides, see my signature for links.
Hi everyone,
Am new in ming BTC, I just acquire 9pcs of Avalon 841 with 13.5th/s. And as to my little research, I learn that I should be able to mine at least $5 in a day. I acquired 9 pcs with all together 121.5TH/S but surprisingly I can only make between $3 to $4 dollar in a day with 121TH/S.
Please I need a guide, is it what am doing is wrong or do I need more things to do that is the current profit rate to run 121.5TH/S.
I will appreciate forum support and guide.
Thanks
Am new in ming BTC, I just acquire 9pcs of Avalon 841 with 13.5th/s. And as to my little research, I learn that I should be able to mine at least $5 in a day. I acquired 9 pcs with all together 121.5TH/S but surprisingly I can only make between $3 to $4 dollar in a day with 121TH/S.
Please I need a guide, is it what am doing is wrong or do I need more things to do that is the current profit rate to run 121.5TH/S.
I will appreciate forum support and guide.
Thanks
Jump to: