Any miner-related website is always blocked with Kaspersky so you must disable the antivirus before you can properly access them.
Or alternatively use a mobile phone to set up your miner.
Topic: Avalon 1166 - can't edit/add pools/worker as no submit button (Read 135 times)
Guys another update
Adding a dot( . ) and number to the worker isnt the issue, it was actually Kaspersky Internet Security causing the problem
My antivirus software was not allowing any data to be submit to the 192.168.... miner admin page...
Pausing Kaspersky for 15 mins is what allowed me to configure the miner and also see the stats
Adding a dot( . ) and number to the worker isnt the issue, it was actually Kaspersky Internet Security causing the problem
My antivirus software was not allowing any data to be submit to the 192.168.... miner admin page...
Pausing Kaspersky for 15 mins is what allowed me to configure the miner and also see the stats
Guys I found solution to this problem
Worker must have a dot and a numeric character otherwise it doesnt save.
For example, our worker called China:
Wont work - China
Will work - China.001
Makes sense in a way. Many if not most folks have more than 1 miner so we do that automatically so never really ran into that before as all my miners have unique dotWorker must have a dot and a numeric character otherwise it doesnt save.
For example, our worker called China:
Wont work - China
Will work - China.001
Yer 1st Merit given for bringing that up
Guys I found solution to this problem
Worker must have a dot and a numeric character otherwise it doesnt save.
For example, our worker called China
Wont work - China
Will work - China.001
Worker must have a dot and a numeric character otherwise it doesnt save.
For example, our worker called China
Wont work - China
Will work - China.001
Try to use incognito mode when accessing and configuring your miner.
Also, try to manually type the pool server then save it. If it doesn't work you might have a miner with locked firmware.
Also, try to manually type the pool server then save it. If it doesn't work you might have a miner with locked firmware.
How are you entering the data, are you using copy/paste? If you are, make sure there is no space at the start or end of the line.
Very often when using c/p there is a whitespace added at the end of the line. Miners do no like that and will not accept it.
Very often when using c/p there is a whitespace added at the end of the line. Miners do no like that and will not accept it.
Thanks
The save button was hidden under a firmware banner
However, After hitting save and being prompted to reboot manually, the configuration resets back to empty fields.
So I am unable to add my pool data.
Would could be the cause of this? its resetting back to default
The save button was hidden under a firmware banner
However, After hitting save and being prompted to reboot manually, the configuration resets back to empty fields.
So I am unable to add my pool data.
Would could be the cause of this? its resetting back to default
Hi,
There should be a green button at the bottom, this is what mine looks like.
J.
https://ibb.co/kDKQPRz
There should be a green button at the bottom, this is what mine looks like.
J.
https://ibb.co/kDKQPRz
When logging in via the 192... address i can navigate to the config page which shows the fields to put pool, worker, password, however there is no button to save or submit.
What is the issue here?
What is the issue here?
Jump to: