Author

Topic: avalon 1166 pro 119 asic (Read 137 times)

newbie
Activity: 20
Merit: 0
March 11, 2023, 10:11:25 PM
#8
Replacing the hashboard that isn't found will be the quickest solution as Bitmaxz said. Or you can send the command to run the miner with only two boards. If you're looking for a reliable tester we recommend a STASIC MultiTester or the Universal Avalon Tester. New firmware will be continuously updated in the future to meet newer models.
newbie
Activity: 7
Merit: 0
March 07, 2023, 01:31:38 AM
#7

Why would you buy a test fixture than buy one hash board?
It's not worth it unless you have multiple units or planning to use it for future repairs.


For future repairs, (as I am a repairman)
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
March 06, 2023, 11:23:18 AM
#6

thanks for the reply, the 3rd hash board was the culprit. my only choice is to buy a testfixture.

Why would you buy a test fixture than buy one hash board?
It's not worth it unless you have multiple units or planning to use it for future repairs.

If you only have one unit then replacing the hashboard is the best choice.
newbie
Activity: 7
Merit: 0
March 06, 2023, 03:55:00 AM
#5
Code:
ECHU[1 1 1] ECMM[1]

When ECMM[0], it means that the MM board is in normal state. When ECMM[1], it means that the MM board may have problems, or it may have poor contact with the hash board.

using a working control board and cables still show the same error, and that said control board works on another miner, but thanks for the info.
newbie
Activity: 7
Merit: 0
March 06, 2023, 03:45:26 AM
#4

So the 3rd hash board is bad if you don't have any tools like testfixture to find the damaged chip then you should replace it with a known working one.

thanks for the reply, the 3rd hashboard was the culprit. my only choice is to buy a testfixture.
jr. member
Activity: 43
Merit: 22
March 06, 2023, 02:19:47 AM
#3
Code:
ECHU[1 1 1] ECMM[1]

When ECMM[0], it means that the MM board is in normal state. When ECMM[1], it means that the MM board may have problems, or it may have poor contact with the hash board.
You need to check the MM board first. Also, as BitMaxz said, check your third hash board. If you want to find faulty chips quickly and accurately, you'd better have an Avalon hash board tester. If you don't have the enough budget, you can buy a tester without a screen.
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
March 05, 2023, 09:41:35 AM
#2
According to your miner's API logs one of the miner's hash board is bad have you replaced the 3rd one?

Here are the logs that I talking about
Code:
HASHS[0 0 1]

So the 3rd hash board is bad if you don't have any tools like testfixture to find the damaged chip then you should replace it with a known working one.

There is no guide here for dashboard repair for this unit but maybe you can get some idea from this link below.

- https://www.zeusbtc.com/articles/information/3522-avalon-a10-series-hash-board-repair-guide
newbie
Activity: 7
Merit: 0
March 05, 2023, 07:28:15 AM
#1
hello, I have a 1166 pro that shows 119 asic and wont do anything and sets idle, tested with working psu and control board units, cables, etc. so the fault as not from them. I had replaced the 120th asic with another one from the board but it still shows 119.
my main question is to how to exactly know what asic is the faulty one since I dont have any test fixtures for avalon and only can use control boards and it gets hot may to fast to test the signals via using dc power supplies.
Code:
{'STATUS':[{'STATUS':'S','When':2942,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':2952,'MHS av':0.00,'MHS 30s':0.00,'MHS 1m':0.00,'MHS 5m':0.00,'MHS 15m':0.00,'Found Blocks':0,'Getworks':81,'Accepted':0,'Rejected':0,'Hardware Errors':0,'Utility':0.00,'Discarded':23141078,'Stale':0,'Get Failures':3,'Local Work':10,'Remote Failures':0,'Network Blocks':3,'Total MH':0.0000,'Work Utility':0.00,'Difficulty Accepted':0.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':0,'Device Hardware%':0.0000,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':2942,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':2952,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1166Pro-81-21072802_4ec6bb0_211fc46] DNA[020100000e18b211] MEMFREE[1200808.0] NETFAIL[820 827 1630 1637 2443 2451 0 0] SYSTEMSTATU[Work: In Idle, Hash Board: 2 ] Elapsed[2969] BOOTBY[0x05.00000000] LW[0] MH[0 0 0] HW[0] DH[0.000%] Temp[27] TMax[27] TAvg[27] Fan1[1773] Fan2[2005] Fan3[1783] Fan4[1770] FanR[25%] Vo[1] PS[0 1210 3 1 0 1240 11] PLL0[0 0 0 0] PLL1[0 0 0 0] PLL2[0 0 0 0] GHSspd[0.00] DHspd[0.000%] GHSmm[0.00] GHSavg[0.00] WU[0.00] Freq[0.00] Led[0] MGHS[0.00 0.00 0.00] MTmax[-273 -273 -273] MTavg[0 0 0] TA[359] Core[A3201] PING[0] POWS[0] HASHS[0 0 1] POOLS[0] SoftOFF[3] ECHU[1 1 1] ECMM[1] SF0[300 300 300 300] SF1[300 300 300 300] SF2[300 300 300 300] PVT_T0[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_T1[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_T2[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_V0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW[0 0 0] MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[0 0 0] POW_I2C[OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[] ATAOPTS1[] ADJ[2] Bar[0%] COP[0 0 0] MPO[3200] MVL[87] ATABD0[0 0 0 0] ATABD1[0 0 0 0] ATABD2[0 0 0 0] WORKMODE[0]','MM Count':1,'Smart Speed':1,'Voltage Level Offset':0,'Nonce Mask':25}


Jump to: