Topic: Avalon 1166 went Idle after Aging (Read 180 times)

Honestly, it's hard to troubleshoot this kind of issue without the unit on hand.

I have a few things that I would like you to try instead of running the unit at high performance mode can you switch it to low power mode you can find it under pool config.

Also, I noticed from your logs about ECMM that it also has an abnormal value meaning the the mmboard might have a problem or have poor contact with the hashboard. Solution try to replug all cables from the control board and hashboard then it again.

I'm using binance pool and I don't think that is pool problem or I will get BOOTBY0X7: AM_BOOTBY_POLLING or
8: AM_BOOTBY_POOL_INACTIVE

To provide more context, during the first 10 minutes of operation, everything seems to be functioning perfectly like you see in logs. However after, I've noticed that hardware errors increase, and the hashrate decreases. Eventually, the miner reboots due to `AM_BOOTBY_NOSHARE = 0x11`, indicating five minutes without hashrate.

Given these observations, it does seem like a more intricate issue, possibly related to hardware. If you have any further suggestions or if there are specific diagnostics I can perform, I'd greatly appreciate your guidance.

Ok, I notice bootby tells me that the miner is rebooting, and then under Pools, it shows bad.
So what pool do you mine?

Can you try to switch to other pools?
I suggest try to switch to the Viabtc pool to test here's the link https://www.viabtc.com/

And try run the miner at low power mode you can find it under pool config.

thank you for your reply your information was very helpfull,but I'm experiencing a persistent issue with my AvalonMiner 1166 Pro, and I've been unable to find a solution through other channels, including customer support.

Here's a brief overview of the problem:

Issue: My AvalonMiner 1166 Pro has been in the aging process for a few days, but it doesn't seem to complete. The miner keeps rebooting every 15 minutes, and the logs indicate "bootby0x11: no hashrate for five minutes" and "ADJ(1)."

Actions Taken: I've attempted to stop the aging process using the command [{"command":"ascset","parameter":"0,aging-set,3"}], and I've also tried resetting the miner, but unfortunately, the issue persists.

here the complete log:
{'STATUS':[{'STATUS':'S','When':0,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':204,'MHS av':51948452.24,'MHS 30s':61996015.19,'MHS 1m':59857636.91,'MHS 5m':27689431.71,'MHS 15m':10996170.26,'Found Blocks':0,'Getworks':13,'Accepted':18,'Rejected':0,'Hardware Errors':2,'Utility':5.28,'Discarded':1197424,'Stale':0,'Get Failures':0,'Local Work':2480,'Remote Failures':0,'Network Blocks':2,'Total MH':10845582669.0000,'Work Utility':742922.25,'Difficulty Accepted':2359296.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':24378714,'Device Hardware%':0.0001,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':0,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':205,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1166Pro-75-21072802_4ec6bb0_211fc46] DNA[02010000f4f19a39] MEMFREE[1209504.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 3 ] Elapsed[205] BOOTBY[0x11.00000000] LW[160802] MH[1 1 0] HW[2] DH[16.679%] Temp[38] TMax[83] TAvg[68] Fan1[6953] Fan2[6869] Fan3[6753] Fan4[6610] FanR[100%] Vo[318] PS[0 1203 1272 250 3180 1272 3579] PLL0[7169 68 215 6468] PLL1[11176 29 112 2603] PLL2[9117 57 154 4592] GHSspd[65994.89] DHspd[11.137%] GHSmm[78632.00] GHSavg[52868.49] WU[738564.32] Freq[470.74] Led[0] MGHS[19248.24 15227.49 18435.53] MTmax[77 83 80] MTavg[67 70 68] TA[360] Core[A3201] PING[69] POWS[0] HASHS[0 0 0] POOLS[0] SoftOFF[0] ECHU[0 0 0] ECMM[4] SF0[448 468 488 508] SF1[448 468 488 508] SF2[448 468 488 508] PVT_T0[ 65 70 68 71 69 64 61 68 77 74 66 65 65 69 74 72 69 64 68 72 74 71 69 66 69 74 73 72 74 70 67 73 71 76 70 66 68 72 73 77 74 68 70 73 76 72 72 68 67 71 69 72 71 66 69 70 69 68 69 64 65 69 65 69 69 66 64 69 70 69 65 65 63 69 67 70 66 64 68 67 68 62 63 67 64 69 68 72 68 69 65 68 63 65 65 69 69 65 66 64 63 67 64 64 63 64 64 65 61 60 60 59 61 60 60 61 62 63 66 64] PVT_T1[ 64 68 69 69 68 64 65 70 70 70 70 67 65 70 72 77 71 68 69 74 79 78 71 70 66 73 75 76 73 69 69 73 76 76 73 67 68 74 83 83 74 72 71 77 77 78 74 71 70 74 75 74 74 73 74 74 73 74 72 74 67 70 69 71 74 73 70 73 70 69 73 70 73 73 70 71 75 73 68 70 70 70 71 69 69 71 67 68 68 65 66 68 66 67 66 70 67 66 69 69 67 67 62 65 70 63 67 65 66 67 66 62 65 64 64 64 64 65 65 68] PVT_T2[ 62 67 77 74 68 66 66 66 70 73 71 67 66 68 69 74 70 65 68 70 74 71 71 69 66 70 78 75 73 64 66 69 79 79 70 67 65 71 76 77 73 67 72 73 78 80 73 70 67 72 75 74 73 71 71 72 69 69 68 72 66 69 69 75 70 67 69 71 69 71 69 68 68 69 71 74 66 66 62 63 68 64 66 64 63 63 68 64 60 63 64 62 63 64 62 64 67 65 66 69 64 65 63 63 69 66 65 64 63 60 62 65 60 59 66 61 64 59 59 65] PVT_V0[287 292 294 293 289 290 299 301 298 307 305 307 302 303 294 288 283 282 298 299 297 279 285 282 282 282 289 289 291 291 304 304 301 283 282 281 292 288 285 286 288 289 278 281 278 299 299 294 305 302 301 289 294 293 298 296 297 292 292 300 304 298 292 300 299 295 292 290 291 298 295 294 306 305 304 282 285 287 295 297 299 297 298 298 303 304 304 302 301 304 293 297 299 299 299 304 298 299 298 296 295 291 311 306 308 310 309 307 296 296 295 292 295 296 292 298 302 304 308 307] PVT_V1[297 301 304 301 299 303 293 301 304 295 298 301 296 299 299 301 301 302 292 294 293 287 291 290 285 286 286 296 292 292 291 291 290 292 294 296 295 291 293 285 282 283 285 289 287 294 291 292 292 294 295 285 286 286 289 288 287 290 293 301 297 291 287 299 301 301 295 298 293 293 293 291 294 293 290 290 289 287 292 290 292 295 294 295 302 300 299 297 297 292 295 294 294 302 305 302 295 298 295 298 303 299 297 298 298 296 300 301 296 296 299 298 299 298 294 294 294 296 298 301] PVT_V2[298 301 302 302 298 296 298 294 293 310 306 305 299 300 299 299 305 301 301 306 302 299 296 299 300 298 298 295 299 301 298 298 301 299 304 303 296 292 292 291 293 293 300 302 299 298 296 299 300 298 294 292 291 289 290 289 287 292 297 302 290 286 285 299 297 298 290 291 289 289 290 290 294 294 297 281 282 281 294 290 295 297 296 296 293 293 297 290 290 291 285 286 289 292 296 298 302 301 299 305 302 302 305 303 302 297 298 297 290 289 285 292 293 293 293 291 294 292 297 304] MW[59825 59887 59923] MW0[2 5 3 8 3 3 2 2 4 1 4 4 2 6 2 2 1 4 2 4 2 6 6 1 2 4 2 2 5 3 6 2 7 4 5 5 5 0 6 6 2 2 3 1 0 1 3 2 5 3 2 7 6 6 2 2 3 0 6 7 2 2 3 7 6 1 2 7 6 2 4 6 2 10 3 4 6 6 3 6 1 7 7 5 9 1 1 5 7 3 5 2 2 4 3 5 2 4 0 2 2 3 2 8 4 2 6 2 1 6 4 1 7 13 8 4 0 2 3 4] MW1[3 2 5 7 3 4 2 3 4 0 4 6 0 1 1 1 3 4 4 2 2 1 1 2 1 3 1 4 3 4 2 8 1 1 6 1 3 1 2 2 2 3 1 2 3 1 1 4 2 1 4 0 1 4 3 2 3 2 1 4 3 2 3 2 2 3 2 2 6 5 11 1 2 3 2 0 1 2 2 2 7 0 5 0 1 1 4 6 1 1 5 8 5 7 4 2 6 4 4 6 5 2 5 3 5 3 6 6 0 3 3 1 5 5 4 4 2 4 3 2] MW2[3 4 3 6 7 2 5 5 1 3 5 4 8 5 3 6 5 4 4 5 4 4 6 1 5 2 1 3 4 5 3 4 3 3 1 1 2 1 3 3 3 6 5 0 2 3 5 1 1 5 2 4 4 6 4 2 1 3 1 7 6 0 2 4 3 5 5 5 2 2 3 4 3 3 4 4 1 2 4 5 0 4 6 2 6 7 5 3 2 7 2 8 6 6 4 2 3 2 2 1 4 4 5 3 5 5 2 3 5 4 2 2 1 3 3 3 9 2 4 6] ASICCRC0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[0 0 0] POW_I2C[OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[--avalon10-freq 448:468:488:508 --avalon10-voltage-level 35 ] ATAOPTS1[--avalon10-freq 448:468:488:508 --avalon10-voltage-level 43 ] ADJ[1] COP[0 0 0] MPO[3200] MVL[87] ATABD0[448 468 488 508] ATABD1[448 468 488 508] ATABD2[448 468 488 508] WORKMODE[1]','MM Count':1,'Smart Speed':1,'Voltage Level Offset':0,'Nonce Mask':25}

All commands that I got for Avalon came from the Russian forum there is no documentation or explanation of what those commands are and what these values represent.
The command you are pointing to is re-aging like the above said under that parameter those values might be the frequencies of the hashboard you can change it and test if it can help improve your miners hashrate but if you want to optimize the unit you need to use aging command instead of re-aging.

Here's the command below


If you're looking for more commands check my post below
- https://bitcointalksearch.org/topic/m.59012568


The command you are pointing to is not the command to stop aging I already provided from my previous post of what command you can use to stop again.

And, normally, the unit keeps rebooting while aging because it is still under the aging process let it run for a while and let it find the best settings for your unit.

My asic was working with low hashrate then I start aging yesterday and he still aging until now and keep reboot every 20min it work with good hashrate for 15min then stop for 5min and reboot I have try to stop aging by this command but I still have this problem

The 537...612 could be the freq configuration state of the hashboards (mhz)

I would recommend to use the "aging"-button in the FMS Software.

Hello,

I recently encountered an issue with my AvalonMiner 1166 Pro and I've been trying to optimize its settings. I came across a set of commands, including one that looks like this: [{"command":"ascset", "parameter":"0,aging-parameter,60-537:562:587:612"}]. However, I couldn't find any documentation that explains the meaning of the values in this command.

I was wondering if you could help clarify what these values represent and how they are related to the performance of the miner.

Can you still access the miner's IP through the browser?
If you can still access it would you mind copying the API logs and pasting them here make sure to put all logs inside the "insert code tag" it's # button while editing your post here or use pastebin.com and share the link here so that we can review the logs if what happens to your miner?

Or try this command re-aging with the parameter below do step by step from stop aging and then set parameter then reboot.

Hello, i had my miner work unstable so i was recommended to do Aging via FMS Software. So i did it and after it popped up that Aging was sucssesful my miner status went to Idle and now it's not working. Has anyone had similar issues ? Any recommendations how to fix this ?


Thanks