Topic: Avalon 1246 network status not working. (Read 268 times)

This is pretty crummy i had to buy from 3rd party because they dont sell the boards or atleast not at the time. if this company isnt a scam i dont know what is. all this problem with firmware and miner ID garbage for what? to track for what? canaans tracking cost me 1000s of dollars and over a year of hashing. And their only course of action is yea send me $50+shipping ill send another control board to you................you made a TON of money off these at the time and you want to charge me for a hashbaord and contorl board that originally died under "warranty" (looooooooosley said)

when you waste all your time trying to get expensive gear running again it really leaves a sour taste in your mouth. i cut my losses on this garabage

Hello Everybody,

After buying a third control board for my Asic now he is working fine.

Two types of control board for EU market and Asia market so please be carefull.

Thanks a lot to everybody

The firmware link for Canaan units already posted above https://download.canaan-creative.com/

The only problem is that 1246 remove the firmware from their download page I don't know why but there are two firmware available on that page before.
If Canaan recommends to replace the control board then that's the only option and I think once you buy it directly from them I'm sure they can also provide firmware for that unit. Just don't buy from 3rd party.

I have just contact canaan and they say to me to buy a control board directly from their factory.

I think I have no other choice...

Anybody know how to download a firmware directly from an asic ? Maybe if it's possible this solution can work !

I tried to find the firmware for you, but sadly, no mention of "N" version anywhere, in fact, even the other version is not available on their website > https://download.canaan-creative.com/avalon1246/app/  they have not uploaded anything to this link, so it seems like you are going to need to contact them directly.

So you still have the issue without trying my suggestion above?

I don't know where you buy the control board but if you want to flash the control board then contact Canaan because their download page does not have firmware you need to contact them before they email you the firmware.

Or try to contact zeusbtc.com or try to contact the repair center near you check the list here https://www.zeusbtc.com/ASIC-Miner-Repair/ scroll down to the bottom to find them.

Hi guys, I have definitively find the problem but not the solution. Canaan made two types of asics:
- 1246 85th/s for non European market with A3201 chips
- 1246 N 85th/s for European market with A3200 chips

My problems is, I have buy replacement parts for 1246 and not 1246 N parts are the same but not the firmware.

So if anyone had a firmware for an Avalon 1246 with A3200 chips please contact me.

I'm not very familiar with Avalon. According to you, you replaced the control board, and the firmware of this control board is not the same as the other three ASICs, the status light keeps red.  May be caused by the firmware, try to flash the firmware to see if it can be solved.

Would you mind using a tool to check if your network and miners are set up properly?
You can use the Canaan tool called the FMS app you can download it here https://canaan.io/service/447
And diagnose the issue there if its a pool issue it is marked as red or if it's an IP issue it's the same marked as red same goes for other issues better use the manual on how to use the tool.

Also, try to reset your unit to the factory default you can hold the reset button or IPreport button for 10 seconds then release it to restore it to factory default.

If it still does not work try the aging process using the FMS tool to refresh this unit.
If nothing else works there might be an issue on the mac address and maybe one of the units has the same mac address it could also lead to a connection problem.

The other miner are the same Avalon 1246 85th.

I have just check the network configuration and all look great.
I have also change the worker name with one of my friend and the problem still the same.

The only difference between the four asic is the firmware. The asic who not working have a different firmware of the three other since I have change the control board

Yes, based on your current logs above. Can you try to check if that miner is set to DHCP/Static mode if it is set to Static switch it to DHCP to let the miner use a unique local IP sometimes if the miner is set to static IP and another the device uses the same IP the miner internet not work properly so switching it to DHCP can solve this problem.

If it didn't work try to disconnect all devices and only run this miner.

Also, would you mind telling us exactly what pool you are currently mining and what other ASIC miners you have?
Because if you are mining in Nicehash with this unit it won't mine unlike other ASIC miner like Antminer units doesn't have any issue mining on Nincehash. Avalon units usually have problems connecting to the Nicehash pool.

Hi BitMaxz thank for your reply.

So for you the problem just come from a problem with the internet connection ?

Something is strange because the three other asic with the same hub, same pool adress and same worker name are working fine…

It looks normal but look at the "NETFAIL" it has values which I think your problem is related to the internet Hashboards look fine and according to your logs under this BOOTBY[0x04.00000000] Based on Canaan description logs it means "AM_BOOTBY_WEB" so it is related to an internet connection problem.
Another thing is this log "POOLS[0]" shows 0 which means "Pool network bad".

Would you mind checking if you have stable internet and also try to switch to another pool if you are mining on Nicehash I suggest switch to ViaBTC pool.

Hi everybody, I’m new here ans I hope find good guys and help on this forum.

I have buy four Canaan Avalon 1246 85th last year directly at the factory last year. Two weeks ago one asic decide to shut off. After research The control board was dead so I replace it. But after replace it and setting the asic this one not working.

Everything look ok but the network status stay in red on dashboard control panel.

Some idear of the problems ? Other info, the firmware is not the same as my three other asics.

On copy the log:
{'STATUS':[{'STATUS':'S','When':921,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':887,'MHS av':0.00,'MHS 30s':0.00,'MHS 1m':0.00,'MHS 5m':0.00,'MHS 15m':0.00,'Found Blocks':0,'Getworks':27,'Accepted':0,'Rejected':0,'Hardware Errors':0,'Utility':0.00,'Discarded':3224595,'Stale':0,'Get Failures':1,'Local Work':10,'Remote Failures':0,'Network Blocks':2,'Total MH':0.0000,'Work Utility':0.00,'Difficulty Accepted':0.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':0,'Device Hardware%':0.0000,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':921,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':887,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1246-21072802_4ec6bb0_211fc46] DNA[02010000f6fdc5a4] MEMFREE[1365648.0] NETFAIL[817 828 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 3 ] Elapsed[909] BOOTBY[0x04.00000000] LW[849973] MH[0 0 0] HW[0] DH[0.000%] Temp[29] TMax[75] TAvg[65] Fan1[4962] Fan2[4923] Fan3[5054] Fan4[5057] FanR[67%] Vo[333] PS[0 1193 1333 240 3194 1332 3498] PLL0[0 0 0 759] PLL1[0 0 0 681] PLL2[0 0 0 1544] GHSspd[0.00] DHspd[0.000%] GHSmm[0.00] GHSavg[0.00] WU[0.00] Freq[0.00] Led[0] MGHS[0.00 0.00 0.00] MTmax[75 73 69] MTavg[67 64 63] TA[360] Core[A3201] PING[0] POWS[0] HASHS[0 0 0] POOLS[0] SoftOFF[0] ECHU[0 0 0] ECMM[0] SF0[436 456 476 496] SF1[436 456 476 496] SF2[436 456 476 496] PVT_T0[ 68 69 71 69 68 67 67 71 69 68 69 67 68 70 70 73 70 68 68 75 75 73 72 70 70 74 72 72 68 68 67 70 69 71 69 66 66 71 71 71 72 67 63 70 70 68 71 64 65 64 67 64 65 67 62 67 63 68 61 61 65 60 62 60 64 60 60 65 62 56 67 62 64 65 64 65 67 65 69 65 66 65 68 68 69 68 66 68 66 69 70 69 68 69 64 65 72 69 69 68 71 66 69 68 65 67 68 67 65 67 66 64 67 70 69 70 65 66 70 69] PVT_T1[ 68 67 66 66 67 65 67 69 67 69 68 65 66 70 71 69 69 69 63 68 73 70 69 65 65 70 69 69 70 63 66 70 69 69 67 64 67 71 69 69 67 67 67 66 65 68 69 66 64 67 67 66 65 62 63 66 67 64 64 61 61 60 57 59 61 59 62 61 59 61 63 62 62 64 60 59 62 61 64 61 60 63 63 65 64 64 64 65 64 65 66 63 64 62 64 66 66 64 64 63 63 64 65 65 63 64 66 64 63 64 58 64 68 63 63 65 64 64 64 62] PVT_T2[ 61 66 64 67 64 63 64 64 64 65 67 67 68 67 66 66 69 67 67 66 69 66 69 64 64 67 64 67 67 65 67 67 68 67 64 64 67 64 67 68 63 67 63 67 63 62 63 64 62 65 64 61 65 61 61 63 60 57 61 61 58 55 59 56 57 56 62 59 59 62 62 63 61 62 59 63 62 60 63 63 62 61 64 64 63 62 61 61 61 64 64 64 63 64 64 64 66 64 62 65 67 65 65 66 66 64 64 63 62 64 64 64 64 64 65 64 64 60 63 67] PVT_V0[302 303 306 304 307 301 301 300 299 306 309 308 297 300 301 310 311 310 300 297 294 308 303 302 303 302 301 306 306 307 305 305 309 306 305 306 303 304 300 305 303 302 304 303 299 307 305 306 305 306 304 311 306 308 309 306 309 298 304 308 323 315 309 310 306 314 312 309 309 318 311 316 323 318 317 314 316 313 309 311 311 309 307 310 317 315 313 307 306 307 319 318 315 310 311 309 315 310 312 305 304 305 310 311 310 316 317 319 311 309 309 310 308 305 312 313 315 317 317 321] PVT_V1[314 315 319 311 307 310 310 313 314 298 304 306 306 309 309 304 305 305 305 307 303 295 301 300 302 305 306 310 309 310 307 305 304 307 304 304 312 314 311 303 302 302 314 311 307 307 308 313 309 314 313 314 311 311 311 311 309 315 315 321 319 312 313 317 315 310 315 313 310 317 316 317 311 317 318 306 309 309 309 305 307 312 311 314 313 314 311 311 309 308 312 309 305 313 309 308 314 314 315 314 317 318 313 311 313 313 310 311 304 306 304 315 313 314 311 311 313 310 311 315] PVT_V2[307 310 312 303 306 305 303 306 310 309 308 312 307 308 311 301 303 306 303 309 308 298 302 306 306 306 305 305 307 306 306 309 311 307 308 309 310 304 303 308 311 309 303 305 303 308 306 303 314 307 305 313 314 313 314 311 314 314 317 322 319 315 314 309 309 313 310 314 312 310 310 312 305 302 305 309 310 311 312 310 314 307 311 312 313 314 318 314 317 317 313 315 317 310 307 314 310 314 313 310 311 313 310 313 311 311 315 314 310 311 312 310 309 313 313 312 312 309 312 315] MW[283536 283568 283604] MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[0 0 0] POW_I2C[OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[] ATAOPTS1[] ADJ[0] Bar[4%] COP[0 0 0] MPO[3200] MVL[87] ATABD0[0 0 0 0] ATABD1[0 0 0 0] ATABD2[0 0 0 0] WORKMODE[1]','MM Count':1,'Smart Speed':1,'Voltage Level Offset':0,'Nonce Mask':25}