Topic: avalon 1246 no internet (Read 119 times)

@braa77
Is the switch device and ETH cable in ok condition?
Have you tried another device in place of the A1246 to see if same problem occurs?

buy a new eth cable and try that one.

IMO you have a loose contact. (check plug on switch/router and Avalon MM board and cabel)


Pool 0 disconnecting time is 82 sec and resuming time is 92 sec

you also should try another pool

If you have a problem with the Internet connection on your Avalon 1246 Mineer, there are a few steps you can take to try and resolve the issue.

1. Check the Ethernet cable connection: Make sure that the Ethernet cable is properly connected to the miner and your router or switch. Try connecting another device to the same port to make sure the problem is not related to the port.

2. Check your network settings: Make sure that the network settings on the miner are correct and match your local network. Check that the device is receiving an IP address and subnet mask. If necessary, change the network settings and reboot the miner.

3. Reboot the miner: Try rebooting the miner to fix possible software issues.

4. Update the firmware: Check that you have the latest version of firmware installed on the miner. If not, update the firmware to the latest version.

5. Contact the manufacturer: If you are unable to resolve your Internet connection problem, please contact the manufacturer of the Avalon 1246 Miner for assistance. They can help you diagnose the problem and find a solution.

6. In general, Internet connection problems on Avalon 1246 Miner can be caused by a variety of reasons, from hardware issues to network configuration issues. However, by following the steps above, you increase your chances of solving the problem and restoring your Avalon 1246 Miner Internet connection.

POOL[0] indicates the pool is connected and alive. Also, if SoftOFF = 3 && POOLS = 1 && PING = 0 then you may have dead pools or a faulty ethernet port/cable and/or a bad wiznet chip.

It seems what you may have installed is a regular 1246 (A3201) control board with N-type (A3200) hash boards, or your control board is faulty. But, your control board is not oem due to the hash rate designation missing in Ver. Also, since your ATAOPTS1 is null and your ATABD0/1/2 are also null this indicates that it is an first-run, new control board. To check your control board (log attribute): Core[A320x]. To check your hash boards: There is a designation written on the top front right edge of each hash board will be something like "MMv3_*_3200". Or, if your BUSS bar connectors on the hash boards only have 1 side and not 2 indicates you have A3200 hash boards. Also, your ASIC booster will have much bigger capacitors with the A3200's. The fact that the BOOTBY indicates restart by API (automated or reboot command entered), there are no error codes, no connection problems, in high-performance mode, alive pools, not idling, and none of your ASICs are overheating, indicates all your components are good just not compatible.

---

My recommendation: Check and make sure your control board and your hash boards are compatible; then allow the aging process to complete (log when completed: ADJ[2] BAR[100%]. Manual restart of the miner is required.) ***Note: If the unit goes back into aging-mode after completion then you haven't fixed the compatibility issue, or you may need to use a Linux CLI to enter commands. The 'diagnose' tool that comes with FMS is way to slow and the unit will restart before the other 2 commands can be entered.

I thought your problem is solved. Anyway, have you tried my suggestion from my previous posts in your thread? If it didn't work and the problem is still there make sure that you always do a factory reset every time you flash the unit.

And actually, you have a different unit but try to change your network settings from DHCP to static using the same IP but this time add DNS(Google DNS or Cloudflare DNS) maybe the Pie chart is not built-in but requesting data somewhere online.

Hi there,
Does your browser show you the charts? (piecharts and linecharts) Not mine.
If so, what browser are you using and what firmware is installed?

Sorry offtopic, but i can't send you a pm.

Like BitMaxz said, check your internet settings and pool settings and reboot. Here is a troubleshooting guide for the 1246.

Pools 0 is related to connection problem. What pool do you mine?
Do you have a stable internet connection?

Would you mind to check if your miner is set to DHCP mode if it is set to DHCP mode try to switch to static and set the IP with the current IP of your miner then add DNS you can either use google DNS or Cloudflare.

I guess that the pool you are trying to mine is blocked by your ISP.
Also, take note that this miner does not work in the Nicehash pool so try to switch to another pool.

hello everyone

i have 1246-n-85t avalon

he give me internet MC0 see the log below
http://

STATUS=S,When=1032,Code=70,Msg=CGMiner stats,Description=cgminer 4.11.1|STATS=0,ID=AVA100,Elapsed=1021,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM ID0=Ver[1246-22011901_4ec6bb0_3e42b91] DNA[02010000e90e56ba] MEMFREE[1210864.0] NETFAIL[82 92 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 3 ] Elapsed[1021] BOOTBY[0x05.00000000] LW[895010] MH[0 0 0] HW[0] DH[0.000%] Temp[24] TMax[80] TAvg[65] Fan1[5205] Fan2[5153] Fan3[5186] Fan4[5180] FanR[68%] Vo[343] PS[0 1218 1373 233 3202 1372 3470] PLL0[0 0 0 508] PLL1[0 0 0 461] PLL2[0 0 0 658] GHSspd[0.00] DHspd[0.000%] GHSmm[0.00] GHSavg[0.00] WU[0.00] Freq[0.00] Led[0] MGHS[0.00 0.00 0.00] MTmax[79 80 79] MTavg[67 63 64] TA[360] Core[A3201] PING[0] POWS[0] HASHS[0 0 0] POOLS[0] SoftOFF[0] ECHU[0 0 0] ECMM[0] SF0[424 444 464 484] SF1[424 444 464 484] SF2[424 444 464 484] PVT_T0[ 79  72  63  65  71  78  72  71  69  67  73  69  74  67  66  74  69  70  69  73  73  76  64  70  67  71  77  68  71  70  64  73  70  70  70  69  73  68  69  72  71  68  65  66  68  70  70  68  67  64  75  71  62  62  63  62  65  67  65  59  64  63  64  59  64  64  69  68  60  64  69  67  68  64  64  64  66  69  71  69  66  58  71  72  59  71  65  56  59  68  63  65  68  64  68  71  68  68  66  67  70  69  69  69  65  67  68  69  69  67  65  65  71  70  67  66  62  59  69  70] PVT_T1[ 61  68  69  64  66  68  64  64  65  70  63  63  64  64  70  80  65  64  68  71  77  67  67  69  66  65  71  75  68  67  64  65  73  73  63  63  68  65  73  69  63  64  67  69  74  70  65  62  62  64  70  64  62  60  62  67  60  61  61  58  59  57  55  58  54  61  61  59  60  59  62  66  63  60  61  66  64  64  63  61  59  58  66  64  60  61  60  59  60  59  62  60  60  59  62  64  60  61  61  66  63  63  63  62  64  60  64  59  63  63  61  64  63  64  61  64  64  64  63  66] PVT_T2[ 70  67  72  69  69  68  68  69  66  66  67  64  64  69  67  68  69  65  66  64  70  74  69  68  65  73  70  66  69  63  65  64  65  74  69  66  69  67  75  75  71  67  70  74  79  71  69  64  64  65  64  64  64  62  61  65  62  67  61  60  58  56  52  59  59  57  61  59  54  56  60  62  64  63  59  60  64  65  63  63  58  56  59  64  62  63  59  61  62  63  61  63  63  62  64  64  66  64  61  62  63  66  60  61  56  59  63  63  61  64  58  57  65  63  66  68  59  59  64  64] PVT_V0[315 314 318 318 308 298 321 320 315 310 314 312 313 312 318 310 314 312 311 315 310 316 318 316 312 308 314 305 311 310 309 306 317 314 317 314 308 309 310 310 310 310 309 311 310 308 310 313 315 315 316 317 317 317 317 311 315 314 319 320 329 325 320 323 319 322 322 323 324 318 310 314 317 319 311 313 309 305 318 315 314 307 301 302 306 301 297 308 311 307 311 309 307 324 326 325 317 316 316 320 319 318 313 313 318 297 301 300 321 317 321 321 318 319 315 317 314 319 320 323] PVT_V1[315 317 321 311 313 310 311 310 315 309 317 314 315 310 313 314 317 319 314 314 313 311 314 311 306 309 313 305 306 306 307 309 309 310 314 315 313 314 315 310 310 315 305 306 306 310 314 312 314 314 310 310 308 311 313 310 311 311 316 318 322 317 316 318 321 317 325 322 323 310 314 313 315 314 319 312 314 314 322 321 322 319 321 321 317 313 315 318 321 314 322 321 318 315 313 314 316 317 314 313 317 314 318 318 319 318 315 315 322 321 321 313 313 313 314 309 308 307 310 311] PVT_V2[305 309 317 314 311 314 317 314 313 313 315 311 304 305 308 316 321 318 317 318 318 311 310 313 312 313 315 307 305 305 319 322 315 319 314 316 313 316 311 312 310 312 309 311 307 313 306 309 321 318 319 315 317 317 313 315 309 311 309 317 322 322 317 324 327 327 319 318 314 319 315 316 316 317 320 319 321 317 314 310 311 308 311 319 319 321 324 322 317 320 315 318 313 318 318 319 319 321 322 318 320 317 313 313 317 317 315 323 317 318 318 307 313 308 317 322 321 319 319 321] MW[298438 298366 298403] MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[0 1220 1614] POW_I2C[OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[] ATAOPTS1[] ADJ[0] Bar[8%] COP[0 0 0] MPO[3200] MVL[87] ATABD0[0 0 0 0] ATABD1[0 0 0 0] ATABD2[0 0 0 0] WORKMODE[1],MM Count=1,Smart Speed=1,Voltage Level Offset=0,Nonce Mask=25|�