Topic: avalon (Read 2016 times)
I want to add modules to my avalons. Is the module itself enough or do i need other parts too?
My batch 1 generally run slightly better and amoother than my batch 2 but I have moved modules on my b1 and created a small gap between the top plate and exsaust side...... allows the blue light fan to work no problem on 100%
I thought 4 modules was the most? Where did you hear about 6 modules?
6 modules was a very early estimate before any batches were even shipping really. It turns out they stuck with 4.
Quote from: WEB slicer
Somebody who has batch 1 is telling me batch 1 is better and batch 2 had problems. Is this correct?
FUD. B2 is actually better than B1, better power supplies and better board revisions. Any box sent out recently has solved those issues you "heard" of.
Why am i hearing some untis belonging to a certain batch have issues? Such as F1 fuse and P2 jumpers.
avalon 1 and 2 perform pretty much the same 
Somebody who has batch 1 is telling me batch 1 is better and batch 2 had problems. Is this correct?
no
Somebody who has batch 1 is telling me batch 1 is better and batch 2 had problems. Is this correct?
I thought 4 modules was the most? Where did you hear about 6 modules?
The Avalons will do 4-6 modules per unit potentially in future.
"with one more empty expansion slots, totally 4 slots.
If time permits, Avalon Unit in batch #2 will have 6 module slots, this is not guaranteed."
-An avalon-asics.com page.
"with one more empty expansion slots, totally 4 slots.
If time permits, Avalon Unit in batch #2 will have 6 module slots, this is not guaranteed."
-An avalon-asics.com page.
Which batch do people prefer 1 or 2? Which batch has issues?
I hear about people controlling the fan speed. How?
I hear about people controlling the fan speed. How?
Is that the only difference? Are batch 1 and 2 modules compatible? I hear some units had issues.
They are compatible. You just cant mount them in the case of the other. But you can connect them to the controller and mine with them
Is that the only difference? Are batch 1 and 2 modules compatible? I hear some units had issues.
batch 1 & 2 have different screwholes at the heatspreader.
what are the differences between batch 1 2 and 3 ?
The correct formula to calculate HW% is: 100 * HW / (diff1shares + HW)
You are probably looking at the number of shares, and not the number of diff1shares!
You are probably looking at the number of shares, and not the number of diff1shares!
The avalon i got from dogie has been running for 14 hours. So far ive gotten 27016 HW and 31745 accepted. This does not sound right to me.
temp on one module is 23c other two 47c and 49c. why is one so much cooler? can you control fan speed?
also getting HW errors. so far 93 HW and 313 accepted. should it be running with no HW?
also getting HW errors. so far 93 HW and 313 accepted. should it be running with no HW?
the 23c temperature is the temperature of your case and the airflow. This sensor is not attached to a module
temp on one module is 23c other two 47c and 49c. why is one so much cooler? can you control fan speed?
also getting HW errors. so far 93 HW and 313 accepted. should it be running with no HW?
also getting HW errors. so far 93 HW and 313 accepted. should it be running with no HW?
WTB avalon module
How/where do i buy one? I looked for contact information on avalon site but could not find it.
pm me your offer and I might sell you one module
How/where do i buy one? I looked for contact information on avalon site but could not find it.
If you have a 3 module unit can you add the 4th unit? I know ASIC chips are going around but i have a feeling you need more than raw chips.
you can add another module. There is a slot for another module in the unit as well a connector on the controller card. you need to upgrade PSU, 1KW is recommended.
If you have a 3 module unit can you add the 4th unit? I know ASIC chips are going around but i have a feeling you need more than raw chips.
Jump to: