hi all,
I replaced all the blown caps on the 2 avalon project boards with Panasonic 470uF 25V 105 degrees low ESR electrolytic capacitors:
*I CANNOT INSERT IMAGE!
Now every time I switch on the unit the 12v rail is shorted on the psu.
Does anyone know what the problem is? Are the caps wrong?
The original caps are here:
*I CANNOT INSERT IMAGE!
I also would like to know if I can replace the chips on the boards which have burnt?
I think that these chips say cs016321 1248p mtsm7 but I have been unable to locate them anywhere - Can anyone help please?
Also, I have an smd blower so would I be able to put a second cs016321 1248p mtsm7 chip side by side with the original? I am thinking that this might reduce the single chips temp and prevent burning?
Any advice greatly appreciated
Topic: avalon 2nd generation keeps shorting the psu 12v rail! HELP! (Read 666 times)
Jump to: