If you can't click on anything to leave the page you will need to make a new sdcard .
try this thread
https://bitcointalksearch.org/topic/review-avalon-6-miner-winter-mining-notlist3d-also-faq-and-help-1257327
a lot of owners are here on this page.
burned a new sd card didnt work
can you tell me what files do I need to burn
I tried this
openwrt-brcm2708-bcm2708-sdcard-vfat-ext4.img
I feel like I bought a brick
Look at part 3 of that post:
3) Install
Very simple install with the Raspberry PI I recieved from BlockC. It was set to DHCP so install was plug and play. I did change it to static IP as I like static with having multiple miners on my network. BlockC sending the Raspberry Pi with a default of DHCP saves you from the install process you did on the 4.1's if you did it yourself. It saved roughly 15 minutes or so and turned install into a breeze.
For those who did not get the Raspberry Pi kit from BlockC here is a link to a DHCP Raspberry Pi image. All thanks goes to BlockC for the image. Just use a program such as Win32DiskImager and flash it to your SD card. Then insert SD card into Raspberry PI and you now have a DHCP Avalon 6 controller. Download is below:
DHCP RPI Image: https://drive.google.com/file/d/0B5yGu5iTU6MjRlozQjg3a0xRUEE/view?usp=sharing
Try the DHCP image that is BlockC's kit image and see if it does you some good.