Ok. I suggest you contact lightfoot here at the forum and ask him how much it would cost to repair your machine.
You need the right tools, skills and supplies for the repair and lightfoot has them all.
Topic: Avalon 741 keeps on restarting and no GHz (Read 305 times)
@HagssFIN
Thank you for the help, the problem was the PG-12 side of the board. I need to make that side work to hopefully make it function again.
Thank you for your time.
Thank you for the help, the problem was the PG-12 side of the board. I need to make that side work to hopefully make it function again.
Thank you for your time.
@HagssFIN
I re-imaged the raspberry pi, still having the same problem. what are my options now?
I re-imaged the raspberry pi, still having the same problem. what are my options now?
@itzazkrit
From what I understood after reading OP's posts, he is only running two of the total four hash boards.
So that is why it shows only 44 chips.
From what I understood after reading OP's posts, he is only running two of the total four hash boards.
So that is why it shows only 44 chips.
@itzazkrit
HagssFIN is correct, the left side has a burned 6pin molex connector so I cannot connect a PSU.
Only the right side is running but no GHSav
@HagssFIN
Thank you for looking,
What is the control board (MM Board), is that the one connected to the ACU or the one connected to the hashboard?
I opened up Avalon to get into the circuit board with the burnt molex connected to it, I also removed it with the advice of BadgerHobbs. I tested it again and still the same result ( 0 GHsav and the fan starting and stopping a few seconds)
One more advice by BadgerHobbs is to update the firmware, I will try it later.
Okay, so based on your posts and the CGMiner API log,
Hash boards do not start hashing and all values are shown as zero.
But I find it hard to believe that both 2 of 4 hash boards you are powering are completely dead.
Based on the weird hash board values and what I've repaired earlier, I'm estimating that you have a faulty control board (MM board).
- PMU (power management unit) board is ok based on the CGMiner API log and green LED indicators.
- AvalonMiner LED indicator goes red.
- AUC3 converter LED indicator goes red.
Hash boards do not start hashing and all values are shown as zero.
But I find it hard to believe that both 2 of 4 hash boards you are powering are completely dead.
Based on the weird hash board values and what I've repaired earlier, I'm estimating that you have a faulty control board (MM board).
Thank you for looking,
What is the control board (MM Board), is that the one connected to the ACU or the one connected to the hashboard?
I opened up Avalon to get into the circuit board with the burnt molex connected to it, I also removed it with the advice of BadgerHobbs. I tested it again and still the same result ( 0 GHsav and the fan starting and stopping a few seconds)
One more advice by BadgerHobbs is to update the firmware, I will try it later.
@itzazkrit
From what I understood after reading OP's posts, he is only running two of the total four hash boards.
So that is why it shows only 44 chips.
From what I understood after reading OP's posts, he is only running two of the total four hash boards.
So that is why it shows only 44 chips.
in log TA is number of chips it detects. Yours shows only 44. It should show 88. I've restarted mine a few times and it came up with 66. I've never gotten mine to hash full power with a 66 count. I have to power up controller first, wait about 15-30 seconds. then plug in power supplies to 741. I'm running dual 750w server supplies.
Did it ever hash at full power? I know that I would have issues with junk power supplies before I upgraded to server spec ones.
nvm. I see that one of your boards is dead anyways. would make sense. I can't remember how boards are connected, but maybe you can swap good board with bad and see if controller will work on other port. Just need to do some troubleshooting to figure out what piece isn't working.
Did it ever hash at full power? I know that I would have issues with junk power supplies before I upgraded to server spec ones.
nvm. I see that one of your boards is dead anyways. would make sense. I can't remember how boards are connected, but maybe you can swap good board with bad and see if controller will work on other port. Just need to do some troubleshooting to figure out what piece isn't working.
Okay, so based on your posts and the CGMiner API log,
Hash boards do not start hashing and all values are shown as zero.
But I find it hard to believe that both 2 of 4 hash boards you are powering are completely dead.
Based on the weird hash board values and what I've repaired earlier, I'm estimating that you have a faulty control board (MM board).
- PMU (power management unit) board is ok based on the CGMiner API log and green LED indicators.
- AvalonMiner LED indicator goes red.
- AUC3 converter LED indicator goes red.
Hash boards do not start hashing and all values are shown as zero.
But I find it hard to believe that both 2 of 4 hash boards you are powering are completely dead.
Based on the weird hash board values and what I've repaired earlier, I'm estimating that you have a faulty control board (MM board).
The CGMiner Status changes between the 2 images, you know it changes because of the loud noise of the fan.
The fan will be loud for a few seconds about 10 seconds then it will quiet down.
No Avalon Device Status
https://dl.dropboxusercontent.com/s/hbym5v5bqrvlheq/cgminer%20%282%29.png
Has Avalon Device Status
https://dl.dropboxusercontent.com/s/k9c79au3dx141yx/cgminer%20%281%29.png
The fan will be loud for a few seconds about 10 seconds then it will quiet down.
No Avalon Device Status
https://dl.dropboxusercontent.com/s/hbym5v5bqrvlheq/cgminer%20%282%29.png
Has Avalon Device Status
https://dl.dropboxusercontent.com/s/k9c79au3dx141yx/cgminer%20%281%29.png
Hi HagssFIN, thank you for the help!
There are 2 API Logs that I noticed
The First is this
Then it will change to this (the ACU is color BLUE)
[/code]
This one is another API Log (The ACU is color GREEN)
[/code]
There are 2 API Logs that I noticed
The First is this
Code:
[Firmware Version] => Avalon Firmware - 20170603
luci: ffc1d59
cgminer: 2354004
cgminer-packages: d309c69
Socket connect failed => Connection refused
Then it will change to this (the ACU is color BLUE)
Code:
[Firmware Version] => Avalon Firmware - 20170603
luci: ffc1d59
cgminer: 2354004
cgminer-packages: d309c69
Reply was 'STATUS=S,When=1521286352,Code=70,Msg=CGMiner stats,Description=cgminer 4.10.0|STATS=0,ID=AV70,Elapsed=137,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM Count=0,Smart Speed=1,Connecter=AUC,AUC VER=AUC-20151208,AUC I2C Speed=400000,AUC I2C XDelay=19200,AUC Sensor=12741,AUC Temperature=37.26,Connection Overloaded=false,Voltage Offset=-2,Nonce Mask=29,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=0 0|STATS=1,ID=POOL0,Elapsed=137,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=4098.00000000,Min Diff=4098.00000000,Max Diff=4098.00000000,Min Diff Count=77,Max Diff Count=77,Times Sent=2,Bytes Sent=170,Times Recv=10,Bytes Recv=7479,Net Bytes Sent=170,Net Bytes Recv=7479|STATS=2,ID=POOL1,Elapsed=137,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=2,Bytes Sent=170,Times Recv=6,Bytes Recv=2687,Net Bytes Sent=170,Net Bytes Recv=2687|STATS=3,ID=POOL2,Elapsed=137,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=2,Bytes Sent=170,Times Recv=6,Bytes Recv=2687,Net Bytes Sent=170,Net Bytes Recv=2687|'
[STATUS] =>
(
[STATUS] => S
[When] => 1521286352
[Code] => 70
[Msg] => CGMiner stats
[Description] => cgminer 4.10.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => AV70
[Elapsed] => 137
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[MM Count] => 0
[Smart Speed] => 1
[Connecter] => AUC
[AUC VER] => AUC-20151208
[AUC I2C Speed] => 400000
[AUC I2C XDelay] => 19200
[AUC Sensor] => 12741
[AUC Temperature] => 37.26
[Connection Overloaded] => false
[Voltage Offset] => -2
[Nonce Mask] => 29
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 0 0
)
[STATS1] =>
(
[STATS] => 1
[ID] => POOL0
[Elapsed] => 137
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 4098.00000000
[Min Diff] => 4098.00000000
[Max Diff] => 4098.00000000
[Min Diff Count] => 77
[Max Diff Count] => 77
[Times Sent] => 2
[Bytes Sent] => 170
[Times Recv] => 10
[Bytes Recv] => 7479
[Net Bytes Sent] => 170
[Net Bytes Recv] => 7479
)
[STATS2] =>
(
[STATS] => 2
[ID] => POOL1
[Elapsed] => 137
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 0.00000000
[Min Diff] => 0.00000000
[Max Diff] => 0.00000000
[Min Diff Count] => 0
[Max Diff Count] => 0
[Times Sent] => 2
[Bytes Sent] => 170
[Times Recv] => 6
[Bytes Recv] => 2687
[Net Bytes Sent] => 170
[Net Bytes Recv] => 2687
)
[STATS3] =>
(
[STATS] => 3
[ID] => POOL2
[Elapsed] => 137
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 0.00000000
[Min Diff] => 0.00000000
[Max Diff] => 0.00000000
[Min Diff Count] => 0
[Max Diff Count] => 0
[Times Sent] => 2
[Bytes Sent] => 170
[Times Recv] => 6
[Bytes Recv] => 2687
[Net Bytes Sent] => 170
[Net Bytes Recv] => 2687
)
This one is another API Log (The ACU is color GREEN)
Code:
[Firmware Version] => Avalon Firmware - 20170603
luci: ffc1d59
cgminer: 2354004
cgminer-packages: d309c69
Reply was 'STATUS=S,When=1521286874,Code=70,Msg=CGMiner stats,Description=cgminer 4.10.0|STATS=0,ID=AV70,Elapsed=123,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM ID1=Ver[7411706-3162860]
DNA[0030f8d6357e6626]
Elapsed[48]
MW[0 0 0 0]
LW[0]
MH[0 0 0 0]
HW[0]
DH[0.000%]
Temp[34]
TMax[34]
Fan[2310]
FanR[25%]
Vi[1196 1196 0 0]
Vo[4277 4268 0 0]
PLL0[0 0 0 0 0 0]
PLL1[0 0 0 0 0 0]
PLL2[0 0 0 0 0 0]
PLL3[0 0 0 0 0 0]
GHSmm[0.00]
WU[0.00]
Freq[0.00]
PG[3]
Led[0]
MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
MW3[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
TA[44]
ECHU[1 17 3841 3841]
ECMM[1]
FAC0[0]
SF0[600 636 672 708 744 780]
SF1[600 636 672 708 744 780]
SF2[600 636 672 708 744 780]
SF3[600 636 672 708 744 780]
PMUV[12c0 12c0]
ERATIO0[0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00%]
ERATIO1[0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00%]
ERATIO2[0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00%]
ERATIO3[0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00%]
C_0_00[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_1_00[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_2_00[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_3_00[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_0_01[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_1_01[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_2_01[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_3_01[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_0_02[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_1_02[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_2_02[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_3_02[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_0_03[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_1_03[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_2_03[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_3_03[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_0_04[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_1_04[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_2_04[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_3_04[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
GHSmm00[0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00]
GHSmm01[0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00]
GHSmm02[0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00]
GHSmm03[0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00]
FM[1]
CRC[0 0 0 0]
PAIRS[22 0 0]
PVT_T[0-126/0--41/-60 0-126/0--41/-60 0-126/0--41/-60 0-126/0--41/-60],MM Count=1,Smart Speed=1,Connecter=AUC,AUC VER=AUC-20151208,AUC I2C Speed=400000,AUC I2C XDelay=19200,AUC Sensor=13032,AUC Temperature=36.25,Connection Overloaded=false,Voltage Offset=-2,Nonce Mask=29,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=0 0|STATS=1,ID=POOL0,Elapsed=123,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=4098.00000000,Min Diff=4098.00000000,Max Diff=4098.00000000,Min Diff Count=67,Max Diff Count=67,Times Sent=2,Bytes Sent=170,Times Recv=9,Bytes Recv=6147,Net Bytes Sent=170,Net Bytes Recv=6147|STATS=2,ID=POOL1,Elapsed=123,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=4098.00000000,Min Diff=4098.00000000,Max Diff=4098.00000000,Min Diff Count=2,Max Diff Count=2,Times Sent=2,Bytes Sent=170,Times Recv=6,Bytes Recv=2553,Net Bytes Sent=170,Net Bytes Recv=2553|STATS=3,ID=POOL2,Elapsed=123,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=2,Bytes Sent=170,Times Recv=5,Bytes Recv=1422,Net Bytes Sent=170,Net Bytes Recv=1422|'
[STATUS] =>
(
[STATUS] => S
[When] => 1521286874
[Code] => 70
[Msg] => CGMiner stats
[Description] => cgminer 4.10.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => AV70
[Elapsed] => 123
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[MM ID1] => Ver[7411706-3162860]
DNA[0030f8d6357e6626]
Elapsed[48]
MW[0 0 0 0]
LW[0]
MH[0 0 0 0]
HW[0]
DH[0.000%]
Temp[34]
TMax[34]
Fan[2310]
FanR[25%]
Vi[1196 1196 0 0]
Vo[4277 4268 0 0]
PLL0[0 0 0 0 0 0]
PLL1[0 0 0 0 0 0]
PLL2[0 0 0 0 0 0]
PLL3[0 0 0 0 0 0]
GHSmm[0.00]
WU[0.00]
Freq[0.00]
PG[3]
Led[0]
MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
MW3[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
TA[44]
ECHU[1 17 3841 3841]
ECMM[1]
FAC0[0]
SF0[600 636 672 708 744 780]
SF1[600 636 672 708 744 780]
SF2[600 636 672 708 744 780]
SF3[600 636 672 708 744 780]
PMUV[12c0 12c0]
ERATIO0[0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00%]
ERATIO1[0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00%]
ERATIO2[0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00%]
ERATIO3[0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00%]
C_0_00[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_1_00[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_2_00[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_3_00[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_0_01[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_1_01[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_2_01[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_3_01[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_0_02[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_1_02[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_2_02[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_3_02[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_0_03[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_1_03[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_2_03[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_3_03[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_0_04[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_1_04[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_2_04[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
C_3_04[ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
GHSmm00[0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00]
GHSmm01[0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00]
GHSmm02[0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00]
GHSmm03[0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00]
FM[1]
CRC[0 0 0 0]
PAIRS[22 0 0]
PVT_T[0-126/0--41/-60 0-126/0--41/-60 0-126/0--41/-60 0-126/0--41/-60]
[MM Count] => 1
[Smart Speed] => 1
[Connecter] => AUC
[AUC VER] => AUC-20151208
[AUC I2C Speed] => 400000
[AUC I2C XDelay] => 19200
[AUC Sensor] => 13032
[AUC Temperature] => 36.25
[Connection Overloaded] => false
[Voltage Offset] => -2
[Nonce Mask] => 29
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 0 0
)
[STATS1] =>
(
[STATS] => 1
[ID] => POOL0
[Elapsed] => 123
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 4098.00000000
[Min Diff] => 4098.00000000
[Max Diff] => 4098.00000000
[Min Diff Count] => 67
[Max Diff Count] => 67
[Times Sent] => 2
[Bytes Sent] => 170
[Times Recv] => 9
[Bytes Recv] => 6147
[Net Bytes Sent] => 170
[Net Bytes Recv] => 6147
)
[STATS2] =>
(
[STATS] => 2
[ID] => POOL1
[Elapsed] => 123
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 4098.00000000
[Min Diff] => 4098.00000000
[Max Diff] => 4098.00000000
[Min Diff Count] => 2
[Max Diff Count] => 2
[Times Sent] => 2
[Bytes Sent] => 170
[Times Recv] => 6
[Bytes Recv] => 2553
[Net Bytes Sent] => 170
[Net Bytes Recv] => 2553
)
[STATS3] =>
(
[STATS] => 3
[ID] => POOL2
[Elapsed] => 123
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 0.00000000
[Min Diff] => 0.00000000
[Max Diff] => 0.00000000
[Min Diff Count] => 0
[Max Diff Count] => 0
[Times Sent] => 2
[Bytes Sent] => 170
[Times Recv] => 5
[Bytes Recv] => 1422
[Net Bytes Sent] => 170
[Net Bytes Recv] => 1422
)
Hello HagssFIN,
sorry but where can I find this API log file?
sorry but where can I find this API log file?
Step 1 - Login https://i.imgur.com/qKS9NXl.jpg
Step 2 - Go to the advanced version GUI https://i.imgur.com/hrh4F1m.jpg
Step 3 - Click CGMiner API Log https://i.imgur.com/eDq2qsk.jpg
Step 4 - Click Debug Switch https://i.imgur.com/f6YJH52.jpg
Step 5 - Click the log text and select all by pressing CTRL + A, then copy the text by pressing CTRL + C. https://i.imgur.com/cDcSDKu.jpg
Step 6 - Paste and post the log text here at the forum in this code format.
6A. https://i.imgur.com/U8CjiSO.jpg
6B. https://i.imgur.com/394x6CL.jpg
Hello HagssFIN,
sorry but where can I find this API log file?
sorry but where can I find this API log file?
Can you post your Cgminer API log?
Hello,
I have a big problem with the Avalon 741, one of the 6 pin molex port got burned, this is due to the PSU, I would like to run the other hashboard but the Avalon keeps on restarting and there is no GHz on the monitor. I have a 750w PSU that i used and an 850w PSU but has the same problem. I know the PSU is not the problem because I can see the 2 green/yellow lights on the hashboard side.
Here is whats happenning, the Avalon led is red, the 2 hashboard lights are green/yellow, the ACU starts with red, then it will turn blue, then it will turn green then back to red. while changing colors, you can hear the fan starts revving up, then after a few seconds the fan will die down. it will do it all again if you leave it running, i checked the monitor and it will stay a 0 GHz.
Does anybody know how to fix this?
I have a big problem with the Avalon 741, one of the 6 pin molex port got burned, this is due to the PSU, I would like to run the other hashboard but the Avalon keeps on restarting and there is no GHz on the monitor. I have a 750w PSU that i used and an 850w PSU but has the same problem. I know the PSU is not the problem because I can see the 2 green/yellow lights on the hashboard side.
Here is whats happenning, the Avalon led is red, the 2 hashboard lights are green/yellow, the ACU starts with red, then it will turn blue, then it will turn green then back to red. while changing colors, you can hear the fan starts revving up, then after a few seconds the fan will die down. it will do it all again if you leave it running, i checked the monitor and it will stay a 0 GHz.
Does anybody know how to fix this?
Jump to: