Topic: Avalon 741 Network question (Read 113 times)
Nevermind, I think I got it. I had to set my network on my controller to DHCP then look up my ip address on my router setup page. Thanks!
Sorry for the newbie question here. We just purchased a few Avalon 741 and am trying to get them up and running. I can log into my controller no problem and setup it up according to the instructions I found from Canaan and watched a YouTube video. That part is fine but the controller isn't connecting to the internet through my switch.
So here is my network setup....I have a ethernet connection coming from my router upstairs down to another room to a ethernet switch where I have a laptop connected and the controller connected. When I setup the controller I plugged it directly into the laptop and did the IP address change you are supposed to do and can change my configuration on my controller. Next step I should be able to unplug the controller from the laptop and plug it into the switch...right? Am I missing something? Do I need to find out what the router address is in order to let the controller access the internet?
Thank you!
So here is my network setup....I have a ethernet connection coming from my router upstairs down to another room to a ethernet switch where I have a laptop connected and the controller connected. When I setup the controller I plugged it directly into the laptop and did the IP address change you are supposed to do and can change my configuration on my controller. Next step I should be able to unplug the controller from the laptop and plug it into the switch...right? Am I missing something? Do I need to find out what the router address is in order to let the controller access the internet?
Thank you!
Jump to: