Is there a chance that you have a circuit issue?
what is your setup from start to finish, are you on 220 or 110 volt?
Topic: Avalon 741 Operation (Read 140 times)
I would look at the logs after this happens (before you restart it obv) to see why the hash board has stopped in the first place.
I thought I had the latest firmware, but I'll need to recheck that.
They are hardwired.
I will post if anything changes after checking thru the firmware.
Thanks!
They are hardwired.
I will post if anything changes after checking thru the firmware.
Thanks!
Do you have the latest firmware from Canaan? And do you have them connected to wifi or hard-wired?
Hello
I have two 741s. Each powered by 1600W PSU. I have been running them for 2 months now.
Randomly, one or the other of the two units stops hashing. I reset the power and it begins hashing again. This has occurred about 8 times since I put these on the network.
2nd item is that both of mine hash at 6 - 6.5 THS.
I must be missing something with proper setup.
Anyone have any suggestions or comments?
Thanks in advance. Merry Christmas!
I have two 741s. Each powered by 1600W PSU. I have been running them for 2 months now.
Randomly, one or the other of the two units stops hashing. I reset the power and it begins hashing again. This has occurred about 8 times since I put these on the network.
2nd item is that both of mine hash at 6 - 6.5 THS.
I must be missing something with proper setup.
Anyone have any suggestions or comments?
Thanks in advance. Merry Christmas!
Jump to: