Topic: Avalon 851s and 852 firmware help (Read 129 times)
The controller needs to be some sort of RasPi, it can be made by anyone. Most common is the RasPi-3B. The 3B+ will NOT work. Odds are your controller is fine. If you look at the GUI > status it should say something like "Raspberry Pi 3 Model B Rev 1.2"
All Canaan firmware is located at https://download.canaan-creative.com/
Look at the labels on the side of the miner to see what it should be then connect just the 1 that does not work to a controller and look at the GUI to see what it says under 'DEVICE". If it is blank or does not match what the label on miner says you will need to apply the correct MM firmware to the miner. You may also have to load a matching OpenWrT onto the controller as well.
No matter what, the different Avalon's need to be on different controllers.
Look at the labels on the side of the miner to see what it should be then connect just the 1 that does not work to a controller and look at the GUI to see what it says under 'DEVICE". If it is blank or does not match what the label on miner says you will need to apply the correct MM firmware to the miner. You may also have to load a matching OpenWrT onto the controller as well.
No matter what, the different Avalon's need to be on different controllers.
Would you mind explaining how to identify the controller? mine looks like the avalon one, but doesn't have the avalon logo on it, I opened it up and the chip is some chinese brand.
All Canaan firmware is located at https://download.canaan-creative.com/
Look at the labels on the side of the miner to see what it should be then connect just the 1 that does not work to a controller and look at the GUI to see what it says under 'DEVICE". If it is blank or does not match what the label on miner says you will need to apply the correct MM firmware to the miner. You may also have to load a matching OpenWrT onto the controller as well.
No matter what, the different Avalon's need to be on different controllers.
Look at the labels on the side of the miner to see what it should be then connect just the 1 that does not work to a controller and look at the GUI to see what it says under 'DEVICE". If it is blank or does not match what the label on miner says you will need to apply the correct MM firmware to the miner. You may also have to load a matching OpenWrT onto the controller as well.
No matter what, the different Avalon's need to be on different controllers.
Yes thank you very much, seems like the MM doesn't match the side :/ there's 1 that says 14.5TH/s instead of 15 which I suspect is actually an 851 cause they scratched off the number so I can't say for sure
All Canaan firmware is located at https://download.canaan-creative.com/
Look at the labels on the side of the miner to see what it should be then connect just the 1 that does not work to a controller and look at the GUI to see what it says under 'DEVICE". If it is blank or does not match what the label on miner says you will need to apply the correct MM firmware to the miner. You may also have to load a matching OpenWrT onto the controller as well.
No matter what, the different Avalon's need to be on different controllers.
Look at the labels on the side of the miner to see what it should be then connect just the 1 that does not work to a controller and look at the GUI to see what it says under 'DEVICE". If it is blank or does not match what the label on miner says you will need to apply the correct MM firmware to the miner. You may also have to load a matching OpenWrT onto the controller as well.
No matter what, the different Avalon's need to be on different controllers.
The different Avalon models MUST be on their own controller!
The reason is simple: The different models all have different command values and more importantly different firmware. When upgrading the MM firmware the update would be applied to all miners attached to the controller which would be a bad thing because the 851's or 852's would think they are now a different model.
The reason is simple: The different models all have different command values and more importantly different firmware. When upgrading the MM firmware the update would be applied to all miners attached to the controller which would be a bad thing because the 851's or 852's would think they are now a different model.
So I got this 1x 851s brand new out of the original box from a forgotten package at the warehouse I work at, the other 3 I have are 1x 851 and 2x 852 that I bought from a chinese supplier, these 3 can be connected together on the same controller, however that 1 from the warehouse wouldn't connect to the same controller, does that mean the chinese supplier uploaded the 852 firmware on the one 851 that I have? Also do you know where I can find the firmwares? or a guide for the 851 and 852?
Thanks.
The different Avalon models MUST be on their own controller!
The reason is simple: The different models all have different command values and more importantly different firmware. When upgrading the MM firmware the update would be applied to all miners attached to the controller which would be a bad thing because the 851's or 852's would think they are now a different model.
The reason is simple: The different models all have different command values and more importantly different firmware. When upgrading the MM firmware the update would be applied to all miners attached to the controller which would be a bad thing because the 851's or 852's would think they are now a different model.
Hello,
I have set-up a A852 using the Avalon controller, network and pools are all set up correctly and it hashes fine. However, when I connect my A851s on its own to the same controller, it just says failed to connect.
On CGMiner Status only my A852 shows up, if it is a firmware issue, I can't find anything on canaan's website only stuff for their newer models, any help would be appreciated, I attached my API log for when I connect both units.
Is it not possible to connect the different models on the same controller? Thanks
I have set-up a A852 using the Avalon controller, network and pools are all set up correctly and it hashes fine. However, when I connect my A851s on its own to the same controller, it just says failed to connect.
On CGMiner Status only my A852 shows up, if it is a firmware issue, I can't find anything on canaan's website only stuff for their newer models, any help would be appreciated, I attached my API log for when I connect both units.
Is it not possible to connect the different models on the same controller? Thanks
Quote
[Firmware Version] => Avalon Firmware for avalon8 - 20190416
luci: b9dea8e
cgminer: 4c2e56a
cgminer-packages: bff9628
Reply was 'STATUS=S,When=1533821507,Code=70,Msg=CGMiner stats,Description=cgminer 4.10.0|STATS=0,ID=AV80,Elapsed=97,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM Count=0,Smart Speed=1,Connecter=AUC,AUC VER=AUC-20151208,AUC I2C Speed=400000,AUC I2C XDelay=19200,AUC Sensor=14322,AUC Temperature=31.90,Connection Overloaded=false,Voltage Level Offset=0,Nonce Mask=24,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=0 0|STATS=1,ID=POOL0,Elapsed=97,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=32768.00000000,Min Diff=32768.00000000,Max Diff=32768.00000000,Min Diff Count=149,Max Diff Count=149,Times Sent=10,Bytes Sent=1073,Times Recv=17,Bytes Recv=8766,Net Bytes Sent=1073,Net Bytes Recv=8766|STATS=2,ID=POOL1,Elapsed=97,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=32768.00000000,Min Diff=32768.00000000,Max Diff=32768.00000000,Min Diff Count=1,Max Diff Count=1,Times Sent=2,Bytes Sent=149,Times Recv=5,Bytes Recv=2966,Net Bytes Sent=149,Net Bytes Recv=2966|STATS=3,ID=POOL2,Elapsed=97,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=32768.00000000,Min Diff=32768.00000000,Max Diff=32768.00000000,Min Diff Count=1,Max Diff Count=1,Times Sent=2,Bytes Sent=149,Times Recv=5,Bytes Recv=2966,Net Bytes Sent=149,Net Bytes Recv=2966|'
[STATUS] =>
(
[STATUS] => S
[When] => 1533821507
Code] => 70
[Msg] => CGMiner stats
[Description] => cgminer 4.10.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => AV80
[Elapsed] => 97
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[MM Count] => 0
[Smart Speed] => 1
[Connecter] => AUC
[AUC VER] => AUC-20151208
[AUC I2C Speed] => 400000
[AUC I2C XDelay] => 19200
[AUC Sensor] => 14322
[AUC Temperature] => 31.90
[Connection Overloaded] => false
[Voltage Level Offset] => 0
[Nonce Mask] => 24
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 0 0
)
[STATS1] =>
(
[STATS] => 1
[ID] => POOL0
[Elapsed] => 97
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 32768.00000000
[Min Diff] => 32768.00000000
[Max Diff] => 32768.00000000
[Min Diff Count] => 149
[Max Diff Count] => 149
[Times Sent] => 10
[Bytes Sent] => 1073
[Times Recv] => 17
[Bytes Recv] => 8766
[Net Bytes Sent] => 1073
[Net Bytes Recv] => 8766
)
[STATS2] =>
(
[STATS] => 2
[ID] => POOL1
[Elapsed] => 97
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 32768.00000000
[Min Diff] => 32768.00000000
[Max Diff] => 32768.00000000
[Min Diff Count] => 1
[Max Diff Count] => 1
[Times Sent] => 2
[Bytes Sent] => 149
[Times Recv] => 5
[Bytes Recv] => 2966
[Net Bytes Sent] => 149
[Net Bytes Recv] => 2966
)
[STATS3] =>
(
[STATS] => 3
[ID] => POOL2
[Elapsed] => 97
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 32768.00000000
[Min Diff] => 32768.00000000
[Max Diff] => 32768.00000000
[Min Diff Count] => 1
[Max Diff Count] => 1
[Times Sent] => 2
[Bytes Sent] => 149
[Times Recv] => 5
[Bytes Recv] => 2966
[Net Bytes Sent] => 149
[Net Bytes Recv] => 2966
luci: b9dea8e
cgminer: 4c2e56a
cgminer-packages: bff9628
Reply was 'STATUS=S,When=1533821507,Code=70,Msg=CGMiner stats,Description=cgminer 4.10.0|STATS=0,ID=AV80,Elapsed=97,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM Count=0,Smart Speed=1,Connecter=AUC,AUC VER=AUC-20151208,AUC I2C Speed=400000,AUC I2C XDelay=19200,AUC Sensor=14322,AUC Temperature=31.90,Connection Overloaded=false,Voltage Level Offset=0,Nonce Mask=24,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=0 0|STATS=1,ID=POOL0,Elapsed=97,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=32768.00000000,Min Diff=32768.00000000,Max Diff=32768.00000000,Min Diff Count=149,Max Diff Count=149,Times Sent=10,Bytes Sent=1073,Times Recv=17,Bytes Recv=8766,Net Bytes Sent=1073,Net Bytes Recv=8766|STATS=2,ID=POOL1,Elapsed=97,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=32768.00000000,Min Diff=32768.00000000,Max Diff=32768.00000000,Min Diff Count=1,Max Diff Count=1,Times Sent=2,Bytes Sent=149,Times Recv=5,Bytes Recv=2966,Net Bytes Sent=149,Net Bytes Recv=2966|STATS=3,ID=POOL2,Elapsed=97,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=32768.00000000,Min Diff=32768.00000000,Max Diff=32768.00000000,Min Diff Count=1,Max Diff Count=1,Times Sent=2,Bytes Sent=149,Times Recv=5,Bytes Recv=2966,Net Bytes Sent=149,Net Bytes Recv=2966|'
[STATUS] =>
(
[STATUS] => S
[When] => 1533821507
Code] => 70
[Msg] => CGMiner stats
[Description] => cgminer 4.10.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => AV80
[Elapsed] => 97
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[MM Count] => 0
[Smart Speed] => 1
[Connecter] => AUC
[AUC VER] => AUC-20151208
[AUC I2C Speed] => 400000
[AUC I2C XDelay] => 19200
[AUC Sensor] => 14322
[AUC Temperature] => 31.90
[Connection Overloaded] => false
[Voltage Level Offset] => 0
[Nonce Mask] => 24
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 0 0
)
[STATS1] =>
(
[STATS] => 1
[ID] => POOL0
[Elapsed] => 97
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 32768.00000000
[Min Diff] => 32768.00000000
[Max Diff] => 32768.00000000
[Min Diff Count] => 149
[Max Diff Count] => 149
[Times Sent] => 10
[Bytes Sent] => 1073
[Times Recv] => 17
[Bytes Recv] => 8766
[Net Bytes Sent] => 1073
[Net Bytes Recv] => 8766
)
[STATS2] =>
(
[STATS] => 2
[ID] => POOL1
[Elapsed] => 97
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 32768.00000000
[Min Diff] => 32768.00000000
[Max Diff] => 32768.00000000
[Min Diff Count] => 1
[Max Diff Count] => 1
[Times Sent] => 2
[Bytes Sent] => 149
[Times Recv] => 5
[Bytes Recv] => 2966
[Net Bytes Sent] => 149
[Net Bytes Recv] => 2966
)
[STATS3] =>
(
[STATS] => 3
[ID] => POOL2
[Elapsed] => 97
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 32768.00000000
[Min Diff] => 32768.00000000
[Max Diff] => 32768.00000000
[Min Diff Count] => 1
[Max Diff Count] => 1
[Times Sent] => 2
[Bytes Sent] => 149
[Times Recv] => 5
[Bytes Recv] => 2966
[Net Bytes Sent] => 149
[Net Bytes Recv] => 2966
Jump to: