These things still use the TPLink 703N micro-router running OpenWRT, don't they (which sounds about right if there's a LuCI interface page)?
You could open the machine up, dig out the 703N and do a reset on it (there's details of how to do it on the OpenWRT wiki).
Topic: Avalon Mini 60Gh Problems (Read 947 times)
What is the IP of the computer that you are using?
If you are in the 192.168.0.xxx range, try changing it to the 192.168.1.xxx or 192.168.10.xxx ranges instead and then search for it again using netscan.
If you are in the 192.168.0.xxx range, try changing it to the 192.168.1.xxx or 192.168.10.xxx ranges instead and then search for it again using netscan.
Not able to get into the control panel as it is not been picked up on network, is there another way of doing it
Done that and not showing it
re download the firmware again propely, the try again to acces your control pannel
Done that and not showing it
Download this : http://www.softperfect.com/products/networkscanner/
Scan your local network and it'll tell you the IP at which your Avalon is working.
Scan your local network and it'll tell you the IP at which your Avalon is working.
I just got a 60Gh Avalon Mini Miner.
I was having problems with it mining so the guy told me to update the firmware which I did fine.
But now I am unable to get to the control panel to set it up.
I get the black screen with - LuCI - Lua Configuration Interface (This could be in cache memory)
but nothing else, not picked up on network, or in router
Any ideas
I was having problems with it mining so the guy told me to update the firmware which I did fine.
But now I am unable to get to the control panel to set it up.
I get the black screen with - LuCI - Lua Configuration Interface (This could be in cache memory)
but nothing else, not picked up on network, or in router
Any ideas
Jump to: