I'm taking a stab and thinking that there has been no firmware installed.. anyone know how to install the firmware?
Posted from Bitcointa.lk - #8yoEOjiD8UzHTBwf
Topic: Avalon3 single module issues (Read 732 times)
(just to explain the why... I started mining a few years ago with my basic computer that sat dormant a lot.. I spent some, lost some (mtgox et al) recently I logged in and found a few bitcoins)
so I bought 3 avalon3 single modules, a usb hub and a raspberry pi... direct from avalon plus 3 x 650w hx psu's
so far I've just tried to connect 2 of the modules to my windows 8 desktop (as I'm also new to raspberry)..
I have used zadig to install WinUSB to USB-Serial Controller D (this is the usb device that shows then goes when I insert and remove the usb cable) after I have installed WinUSB I no longer get the error in cgminer telling me to install WinUSB.
I have tried using cgminer and bfgminer neither can see the modules.
The modules are LOUD... once I get it to work I'll see what can be done.
I've tried two modules separately (not linked/chained) and 2 controlling boards with the same results all combinations.
I am stumped.
Thanks
so I bought 3 avalon3 single modules, a usb hub and a raspberry pi... direct from avalon plus 3 x 650w hx psu's
so far I've just tried to connect 2 of the modules to my windows 8 desktop (as I'm also new to raspberry)..
I have used zadig to install WinUSB to USB-Serial Controller D (this is the usb device that shows then goes when I insert and remove the usb cable) after I have installed WinUSB I no longer get the error in cgminer telling me to install WinUSB.
I have tried using cgminer and bfgminer neither can see the modules.
The modules are LOUD... once I get it to work I'll see what can be done.
I've tried two modules separately (not linked/chained) and 2 controlling boards with the same results all combinations.
I am stumped.
Thanks
Jump to: