Baikal Cube fan speed for best operating temperature

Lumining

full member

Activity: 322

Merit: 100

My Quad-Miner (600Mh/s) is always running at the same temp even without additional cooling, it just stands there open-air.
The top Miner is at 40, the second at 38, the third at 37 and the bottom one at 36 Celsius while mining Dash (X11).
Room temperature varies between 15 and 25 degrees (Depending on how many chemtrails the government sprayed the day before Wink

)
As already said, 70 Degrees are the max, but I can't think of a scenario in which the miner reaches this temperature as long as it's not in a closed box.

baikal

full member

Activity: 129

Merit: 100

www.baikalminer.com

Quote from: Vaccinus on May 19, 2017, 08:15:01 AM

Quote from: baikal on May 19, 2017, 06:47:29 AM

Hi,

Highest mining temperature that Baikal miner can bear is 70 degrees, over 70, miner will stop automatically. Once temperature go down back to normal, it will start again itself.

Recommended mining temperature would be 30-50, or around.

Fan speed should refer to ambient temperature.

baikal.

can we change the fan to have lower temp, so we don't get to 70° and the miner don't stop? is any 120mm good enough for this miner? what is the cfm of the fan that you mount on your baikal? thanks

Baikal miner really not produce much heat during mining, the current fans is sure enough to keep mining temperature in a good range, unless in an super high ambient temperture. Changing fan depends on personal opinion.

like @LachlanS, he changed fans and make them get source from power supply directly. Honestly it is pretty beautiful of that purple lights Cheesy

(don't get wrong I not mean to recommend you to do so)

LachlanS

newbie

Activity: 27

Merit: 0

Quote from: Vaccinus on May 19, 2017, 08:15:01 AM

can we change the fan to have lower temp, so we don't get to 70° and the miner don't stop? is any 120mm good enough for this miner? what is the cfm of the fan that you mount on your baikal? thanks

I bought 4x 120mm Coolermaster fans, temps are low 30's mining quark and low 40's (celcius) mining x11.
I bought standard 12v 3 pin (not the wierd Baikal 4-pin ones) and run them straight off my PSU. You can get 12v >9 V resistor cables if you want to slow them down, mine are quiet enough I just left them at full speed though.

Vaccinus

sr. member

Activity: 406

Merit: 250

Quote from: baikal on May 19, 2017, 06:47:29 AM

Hi,

Highest mining temperature that Baikal miner can bear is 70 degrees, over 70, miner will stop automatically. Once temperature go down back to normal, it will start again itself.

Recommended mining temperature would be 30-50, or around.

Fan speed should refer to ambient temperature.

baikal.

can we change the fan to have lower temp, so we don't get to 70° and the miner don't stop? is any 120mm good enough for this miner? what is the cfm of the fan that you mount on your baikal? thanks

baikal

full member

Activity: 129

Merit: 100

www.baikalminer.com

Hi,

Highest mining temperature that Baikal miner can bear is 70 degrees, over 70, miner will stop automatically. Once temperature go down back to normal, it will start again itself.

Recommended mining temperature would be 30-50, or around.

Fan speed should refer to ambient temperature.

baikal.

Gunna01

sr. member

Activity: 306

Merit: 251

Quote from: Starkz on May 17, 2017, 08:11:29 PM

For those who own the cube, what is your temp setting and fan speed?

Is there an optimum temp range? What is the highest safe temp?

Depends on your ambient temp of the room.

I have mine at room temp, sometimes bit higher due to having my gaming PC running and i have the fans at 50%

Starkz

member

Activity: 91

Merit: 10

For those who own the cube, what is your temp setting and fan speed?

Is there an optimum temp range? What is the highest safe temp?

Topic: Baikal Cube fan speed for best operating temperature (Read 771 times)