Just re-install the whole BAMT
You can also check the messages log file to see what error is causing the problem:
Code:
sudo tail -n 100 /var/log/messages
If it's a syntax error in a config file, it usually will say so.
Topic: BAMT: A fault has been detected on GPU 0,1,2,3,4,5! HELP! (Read 2714 times)
You can also check the messages log file to see what error is causing the problem:
If it's a syntax error in a config file, it usually will say so.
Just re-install the whole BAMT
It is quite common that you cant modify voltages in linux-distros.
Atleast I havent find any way to do it in BAMT, or BAMT derivatives.
Windows has more tools to OC or UC your system.
I personally like BAMT and don't care about voltage-adjustments.
Atleast I havent find any way to do it in BAMT, or BAMT derivatives.
Windows has more tools to OC or UC your system.
I personally like BAMT and don't care about voltage-adjustments.
Nevermind! Found it! Typo in the gpu-vddc line!
Now, that I have corrected it to "1.140", why does it still show 1.20 in my stats window?
Now, that I have corrected it to "1.140", why does it still show 1.20 in my stats window?
As per title...
Got the network drivers installed and I have connection. Here is my BAMT.comf file:
# Big A Miner Thing configuration
# full example of options available in /etc/bamt/bamt.conf
---
settings:
# miner info used in alerts, etc
# id is used to set hostname and identify this rig in farm wide displays
miner_id: bamt-miner
# loc is any addition string you wish to use to identify this rig (location?)
miner_loc: unspecified location
# sending status to mgpumon..
# send directly to IP address (only needed if mgpumon is on different network)
# do_direct_status: 192.168.1.1
# and/or broadcast on local IP network 1 = yes, 0 = no
# recommend to leave enabled, harmless and very handy
do_bcast_status: 1
# central config managment? 1 = yes, 0 = no (sensing a pattern here?)
do_manage_config: 0
# command to run for config updates, this is just one example..
# note this is old school, pre autoconf but still a fine way to do things if you prefer it
# config_update_cmd: /usr/bin/rsync -aL rsync://192.168.1.1:873/config/miner1/* /etc/bamt/
# how long to wait for X to start (seconds) - increase if mining fails to start at boot
# slower machines or booting from slow USB key may need as long as 60 seconds here
start_mining_init_delay: 20
# delay in between starting individual GPUs (seconds) - increase if gpus lock during mining init
start_mining_miner_delay: 3
# api keys for gpumon, all optional
# apikey_btcguild:
# apikey_deepbit:
# apikey_bitclockers:
# apikey_slush:
# apikey_bithasher:
# apikey_mtred:
# apikey_ozcoin:
# apikey_nofee:
# apikey_rfc:
# apikey_polmine:
# apikey_btcpool:
# apikey_triple:
# apikey_abc:
# monitoring config..
# should we monitor the cards? (send email alerts, etc) 1 = yes, 0 = no
do_monitor: 0
# smtp settings for sending alerts
# required..
# smtp_host: 127.0.0.1
# smtp_to: [email protected]
# optional..
# smtp_port: 587
# smtp_from: [email protected]
# set these to 1 to enable
# smtp_tls: 1
# smtp_ssl: 1
# authentication for sasl or tls
# smtp_auth_user: youruser
# smtp_auth_pass: yourpass
# don't send emails more often than smtp_min_wait seconds, default 300
# smtp_min_wait: 300
# include current system status details in alerts? (defaults on, disable for smaller emails)
# smtp_include_details: 1
# if you don't like the automatic subjects..
# smtp_subject: I wanted a custom subject in my alerts...
# start autoconf client - no harm in running client even if not using autoconf server on network
do_autoconf_client: 1
# start mgpumon in background using /etc/bamt/mgpumon.conf?
do_mgpumon: 0
# detect hung GPUs and auto reboot (phoenix only)
detect_defunct: 1
# use cgsnoop?
do_cgsnoop: 0
# cgminer options
# start cgminer? set this to 1, and also set cgminer: 1 on each GPU you will manage with cgminer
cgminer: 1
# options to cgminer (must have at least --api-listen for any bamt tools to work)
# see cgminer documentation for options. you may want to put cgminer config in
# another file and simply put --config /that/file here.
cgminer_opts: --api-listen --config /etc/bamt/cgminer.conf
# tcp port for cgminer.. defaults to 4028
# cgminer_port: 4028
# GPU Configuration
# You'll need one gpuX: section per GPU installed. Not sure what's installed,
# or the order? Open a root shell and type: aticonfig --list-adapters
#
# You can delete gpu sections if you don't have that many cards..
gpu0:
# remove this or set to 0 to actually use this card..
disabled: 0
# set to 1 if cgminer will manage this gpu.
cgminer: 1
# overclocking.. all optional
# enable to debug overclocking.. provides info on screen during mine start/restart
# debug_oc: 1
# optional command to execute prior to overclocking
# pre_oc_cmd:
# val_x = the value to set for this profile (0-2)
# Profile 2 is used while mining, but setting values
# in profile 2 that are lower than the values in the other
# profiles is not allowed on some GPUs, so you have to adjust
# the other profiles as well.
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
# fan_speed: 100
# optional command to execute after overclocking
# post_oc_cmd:
# mining setup
# kernel to use.. currently one of: phatk phatk2 phatk-bamt04 phatk-svn phatk-1.50 poclbm
# kernel: phatk2
# phoenix style kernel params. do not include DEVICE=x
# kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=9
# optional phoenix queuesize parameter: how many work units to keep queued at all times
# queue_size: 2
# optional phoenix avgsamples parameter: how many samples to use for hashrate average
# avg_samples: 10
# IMPORTANT: pool_file must contain a list of pool URLs.. one at least, more if
# you like. You can share the same file for all GPUs, or have one for each.
# Miner will start with first URL in file, however if no shares are accepted
# for any reason in (pool_timeout) seconds, the miner will move to next URL
# in the file. Wraps around to first URL when last one fails.
# You can also set pool specific values, see the docs.
pool_file: /etc/bamt/pools
# default time to allow phoenix to run without finding a share..
# exceed this and we move to next pool in poolfile
pool_timeout: 180
# monitoring values, used by email alerts and gpumon
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu1:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
#pool_file: /etc/bamt/pools
#pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu2:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
#pool_file: /etc/bamt/pools
#pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu3:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
#pool_file: /etc/bamt/pools
#pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu4:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
#pool_file: /etc/bamt/pools
#pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu5:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
#pool_file: /etc/bamt/pools
#pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu6:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
pool_file: /etc/bamt/pools
pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu7:
disabled: 1
cgminer: 0
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
fan_speed: 100
kernel: phatk2
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
pool_file: /etc/bamt/pools
pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 80
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_fan_lo: 1000
monitor_reject_hi: 3
Here is my pools file:
stratum+tcp://19A633xChEADPn8SLzLRcNh3hoKSmum5EL:[email protected]:3333,,,stratum+tcp://19A633xChEADPn8SLzLRcNh3hoKSmum5EL:[email protected]:3333
Here is my cgminer.conf file:
{
"pools" : [
{
"url" : "stratum+tcp://eu.middlecoin.com:3333",
"user" : "19A633xChEADPn8SLzLRcNh3hoKSmum5EL",
"pass" : "x"
},
{
"url" : "stratum+tcp://middlecoin.com:3333",
"user" : "19A633xChEADPn8SLzLRcNh3hoKSmum5EL",
"pass" : "x"
}
]
,
"intensity" : "13",
"worksize" : "256",
"kernel" : "scrypt",
"thread-concurrency" : "8192",
"api-port" : "4028",
"gpu-threads" : "2",
"gpu-engine" : "1085",
"gpu-memclock" : "1500",
"gpu-vddc" : @1.140@,
"temp-overheat" : "86",
"temp-cutoff" : "96",
"log" : "5",
"scrypt" : true,
"kernel-path" : "/usr/local/bin"
}
Sorry for all the details but can anyone help?
Any idea why I'm getting the dreaded red screen?
Got the network drivers installed and I have connection. Here is my BAMT.comf file:
# Big A Miner Thing configuration
# full example of options available in /etc/bamt/bamt.conf
---
settings:
# miner info used in alerts, etc
# id is used to set hostname and identify this rig in farm wide displays
miner_id: bamt-miner
# loc is any addition string you wish to use to identify this rig (location?)
miner_loc: unspecified location
# sending status to mgpumon..
# send directly to IP address (only needed if mgpumon is on different network)
# do_direct_status: 192.168.1.1
# and/or broadcast on local IP network 1 = yes, 0 = no
# recommend to leave enabled, harmless and very handy
do_bcast_status: 1
# central config managment? 1 = yes, 0 = no (sensing a pattern here?)
do_manage_config: 0
# command to run for config updates, this is just one example..
# note this is old school, pre autoconf but still a fine way to do things if you prefer it
# config_update_cmd: /usr/bin/rsync -aL rsync://192.168.1.1:873/config/miner1/* /etc/bamt/
# how long to wait for X to start (seconds) - increase if mining fails to start at boot
# slower machines or booting from slow USB key may need as long as 60 seconds here
start_mining_init_delay: 20
# delay in between starting individual GPUs (seconds) - increase if gpus lock during mining init
start_mining_miner_delay: 3
# api keys for gpumon, all optional
# apikey_btcguild:
# apikey_deepbit:
# apikey_bitclockers:
# apikey_slush:
# apikey_bithasher:
# apikey_mtred:
# apikey_ozcoin:
# apikey_nofee:
# apikey_rfc:
# apikey_polmine:
# apikey_btcpool:
# apikey_triple:
# apikey_abc:
# monitoring config..
# should we monitor the cards? (send email alerts, etc) 1 = yes, 0 = no
do_monitor: 0
# smtp settings for sending alerts
# required..
# smtp_host: 127.0.0.1
# smtp_to: [email protected]
# optional..
# smtp_port: 587
# smtp_from: [email protected]
# set these to 1 to enable
# smtp_tls: 1
# smtp_ssl: 1
# authentication for sasl or tls
# smtp_auth_user: youruser
# smtp_auth_pass: yourpass
# don't send emails more often than smtp_min_wait seconds, default 300
# smtp_min_wait: 300
# include current system status details in alerts? (defaults on, disable for smaller emails)
# smtp_include_details: 1
# if you don't like the automatic subjects..
# smtp_subject: I wanted a custom subject in my alerts...
# start autoconf client - no harm in running client even if not using autoconf server on network
do_autoconf_client: 1
# start mgpumon in background using /etc/bamt/mgpumon.conf?
do_mgpumon: 0
# detect hung GPUs and auto reboot (phoenix only)
detect_defunct: 1
# use cgsnoop?
do_cgsnoop: 0
# cgminer options
# start cgminer? set this to 1, and also set cgminer: 1 on each GPU you will manage with cgminer
cgminer: 1
# options to cgminer (must have at least --api-listen for any bamt tools to work)
# see cgminer documentation for options. you may want to put cgminer config in
# another file and simply put --config /that/file here.
cgminer_opts: --api-listen --config /etc/bamt/cgminer.conf
# tcp port for cgminer.. defaults to 4028
# cgminer_port: 4028
# GPU Configuration
# You'll need one gpuX: section per GPU installed. Not sure what's installed,
# or the order? Open a root shell and type: aticonfig --list-adapters
#
# You can delete gpu sections if you don't have that many cards..
gpu0:
# remove this or set to 0 to actually use this card..
disabled: 0
# set to 1 if cgminer will manage this gpu.
cgminer: 1
# overclocking.. all optional
# enable to debug overclocking.. provides info on screen during mine start/restart
# debug_oc: 1
# optional command to execute prior to overclocking
# pre_oc_cmd:
# val_x = the value to set for this profile (0-2)
# Profile 2 is used while mining, but setting values
# in profile 2 that are lower than the values in the other
# profiles is not allowed on some GPUs, so you have to adjust
# the other profiles as well.
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
# fan_speed: 100
# optional command to execute after overclocking
# post_oc_cmd:
# mining setup
# kernel to use.. currently one of: phatk phatk2 phatk-bamt04 phatk-svn phatk-1.50 poclbm
# kernel: phatk2
# phoenix style kernel params. do not include DEVICE=x
# kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=9
# optional phoenix queuesize parameter: how many work units to keep queued at all times
# queue_size: 2
# optional phoenix avgsamples parameter: how many samples to use for hashrate average
# avg_samples: 10
# IMPORTANT: pool_file must contain a list of pool URLs.. one at least, more if
# you like. You can share the same file for all GPUs, or have one for each.
# Miner will start with first URL in file, however if no shares are accepted
# for any reason in (pool_timeout) seconds, the miner will move to next URL
# in the file. Wraps around to first URL when last one fails.
# You can also set pool specific values, see the docs.
pool_file: /etc/bamt/pools
# default time to allow phoenix to run without finding a share..
# exceed this and we move to next pool in poolfile
pool_timeout: 180
# monitoring values, used by email alerts and gpumon
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu1:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
#pool_file: /etc/bamt/pools
#pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu2:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
#pool_file: /etc/bamt/pools
#pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu3:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
#pool_file: /etc/bamt/pools
#pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu4:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
#pool_file: /etc/bamt/pools
#pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu5:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
#pool_file: /etc/bamt/pools
#pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 0
monitor_hash_lo: 0.3
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu6:
disabled: 0
cgminer: 1
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
#fan_speed: 100
#kernel: phatk2
#kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
pool_file: /etc/bamt/pools
pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 90
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_fan_lo: 1000
monitor_reject_hi: 3
gpu7:
disabled: 1
cgminer: 0
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
# mem_speed_0: 300
# mem_speed_1: 300
# mem_speed_2: 300
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
fan_speed: 100
kernel: phatk2
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11
pool_file: /etc/bamt/pools
pool_timeout: 180
monitor_temp_lo: 45
monitor_temp_hi: 80
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_fan_lo: 1000
monitor_reject_hi: 3
Here is my pools file:
stratum+tcp://19A633xChEADPn8SLzLRcNh3hoKSmum5EL:[email protected]:3333,,,stratum+tcp://19A633xChEADPn8SLzLRcNh3hoKSmum5EL:[email protected]:3333
Here is my cgminer.conf file:
{
"pools" : [
{
"url" : "stratum+tcp://eu.middlecoin.com:3333",
"user" : "19A633xChEADPn8SLzLRcNh3hoKSmum5EL",
"pass" : "x"
},
{
"url" : "stratum+tcp://middlecoin.com:3333",
"user" : "19A633xChEADPn8SLzLRcNh3hoKSmum5EL",
"pass" : "x"
}
]
,
"intensity" : "13",
"worksize" : "256",
"kernel" : "scrypt",
"thread-concurrency" : "8192",
"api-port" : "4028",
"gpu-threads" : "2",
"gpu-engine" : "1085",
"gpu-memclock" : "1500",
"gpu-vddc" : @1.140@,
"temp-overheat" : "86",
"temp-cutoff" : "96",
"log" : "5",
"scrypt" : true,
"kernel-path" : "/usr/local/bin"
}
Sorry for all the details but can anyone help?
Any idea why I'm getting the dreaded red screen?
Jump to: