BAMT not working with 2 5850's | Bitcointalksearch.org

Ban4na

brand new

Activity: 0

Merit: 0

Quote from: nckrazze on May 20, 2012, 01:21:27 PM

Quote from: ?? on ??

Quote from: elrodvoss on May 10, 2012, 11:44:52 AM

Are you using the most current version of BaMT? I have mine running with 3 Sapphire extreme 5850s.

I can throw you my config file if you want.

I can even MSG you my status page if you want so see what im running at right now.

I also have problems with 5850 extreme. But with overclocking. I just cant overclock this cards with bamt. Can you please send me your conf file? Thanks in advance

What are your clocks. I have 3 5850's in bamt and 3 5830s, i can probably help

I have then now on 895/150 @1.088 (Stock Volt) and they are running stable

punningclan

sr. member

Activity: 283

Merit: 250

Making a better tomorrow, tomorrow.

My rig with 2 5850s has been running well with BAMT for a while now until about 24 hours ago when one of the cards stopped running at over-clocked speed and is now behaving like it's 5830. I've restarted the machine several times, both cards ar over-clocked to 900 with memory at 300 and stock voltage.

nckrazze

sr. member

Activity: 294

Merit: 250

Quote from: ?? on ??

Quote from: elrodvoss on May 10, 2012, 11:44:52 AM

Are you using the most current version of BaMT? I have mine running with 3 Sapphire extreme 5850s.

I can throw you my config file if you want.

I can even MSG you my status page if you want so see what im running at right now.

I also have problems with 5850 extreme. But with overclocking. I just cant overclock this cards with bamt. Can you please send me your conf file? Thanks in advance

What are your clocks. I have 3 5850's in bamt and 3 5830s, i can probably help

nckrazze

sr. member

Activity: 294

Merit: 250

Quote from: elrodvoss on May 10, 2012, 07:31:52 PM

Quote from: nckrazze on May 10, 2012, 12:02:55 PM

Quote from: elrodvoss on May 10, 2012, 11:44:52 AM

Are you using the most current version of BaMT? I have mine running with 3 Sapphire extreme 5850s.

I can throw you my config file if you want.

I can even MSG you my status page if you want so see what im running at right now.

That sounds fine. I like BAMT so much I wouldn't want you to miss out. Send over your config.

No, i was offering to help the OP with his issue. Im new to Bamt, but I have a grasp on how to use it.

I currently have three 5850s running on one BaMT rig, and working to load it up with 2 more 5850s.

Then have 2 more motherboards just waiting for some powercolor 6850s that I "hope" i found cheap.

Should be cheaper then the 5850s, same power usage, and slightly better limit to max Mhash.

Oh alright, yeah I am new to bamt as well, running it on 2 5830s, 1 5850, waiting to put in another 5830. however, I just blew a psu overclocking.

elrodvoss

member

Activity: 87

Merit: 10

Quote from: nckrazze on May 10, 2012, 12:02:55 PM

Quote from: elrodvoss on May 10, 2012, 11:44:52 AM

Are you using the most current version of BaMT? I have mine running with 3 Sapphire extreme 5850s.

I can throw you my config file if you want.

I can even MSG you my status page if you want so see what im running at right now.

That sounds fine. I like BAMT so much I wouldn't want you to miss out. Send over your config.

No, i was offering to help the OP with his issue. Im new to Bamt, but I have a grasp on how to use it.

I currently have three 5850s running on one BaMT rig, and working to load it up with 2 more 5850s.

Then have 2 more motherboards just waiting for some powercolor 6850s that I "hope" i found cheap.

Should be cheaper then the 5850s, same power usage, and slightly better limit to max Mhash.

nckrazze

sr. member

Activity: 294

Merit: 250

Quote from: elrodvoss on May 10, 2012, 11:44:52 AM

Are you using the most current version of BaMT? I have mine running with 3 Sapphire extreme 5850s.

I can throw you my config file if you want.

I can even MSG you my status page if you want so see what im running at right now.

That sounds fine. I like BAMT so much I wouldn't want you to miss out. Send over your config.

elrodvoss

member

Activity: 87

Merit: 10

Are you using the most current version of BaMT? I have mine running with 3 Sapphire extreme 5850s.

I can throw you my config file if you want.

I can even MSG you my status page if you want so see what im running at right now.

nckrazze

sr. member

Activity: 294

Merit: 250

Quote from: btcnode on May 10, 2012, 10:12:03 AM

I just gave up on BAMT altogether and am doing CGMiner from a Xubuntu box.

;(

btcnode

newbie

Activity: 39

Merit: 0

I just gave up on BAMT altogether and am doing CGMiner from a Xubuntu box.

nckrazze

sr. member

Activity: 294

Merit: 250

Hey man I think I know what the problem is.

If you want, I can provide my config file when I get home, but I think I know whatsup.

Are you sure your internet connection is up? I get faults in BAMT when I have no internet.

Also, are your pools setup correctly. This leads to faults as well.

Let me know if these work for you, if not, I'll gladly post the config files for you.

Hope this helps!
-Nick

whiskers75

hero member

Activity: 658

Merit: 502

Doesn't use these forums that often.

Try the Hi and Lo levels. It's because BAMT is saying 'fault', so not mining...

whiskers75

hero member

Activity: 658

Merit: 502

Doesn't use these forums that often.

BAMT, the Big A Miner Thing.
HOW TO USE
1. Put BAMT on a USB stick with a tool like Unetbootin
2. Set your BIOS* to boot from the stick
3. You might need to edit some configs. I don't know how exactly; ask in a new thread.
4. Mine away!

* BIOS can be reached via pressing whatever key it says for Setup e.g
DELL
F2 to enter Setup,...
At this, press F2

Buffcorp

member

Activity: 101

Merit: 10

can someone explain BAMT to me?

whiskers75

hero member

Activity: 658

Merit: 502

Doesn't use these forums that often.

As I said - try raising your hi/lo's. And use google for advice on configuring BAMT!
Oh - and you could just do this instead of using the main BAMT thingy...
screen
[cgminer command here]

Hope this helps

btcnode

newbie

Activity: 39

Merit: 0

I've posted in a few boards actually. If I run CGMINER directly, my cards mine just fine. They don't seem to connect with the BAMT monitoring package however.

whiskers75

hero member

Activity: 658

Merit: 502

Doesn't use these forums that often.

The monitor_temp_lo and suchlike. Does bamt still mine - even though you have a 'fault'?
And also - ARE your GPUs faulty?

btcnode

newbie

Activity: 39

Merit: 0

What are hi/lo levels?

whiskers75

hero member

Activity: 658

Merit: 502

Doesn't use these forums that often.

Hm... Don't have any mining experience, but:
A) your system might throw the fault because your hi/lo levels are incorrect
B) you HAVE a fault!
As I said - I don't have much experience with this.
Backup your config file if you change it!
If this solved your problem, BTC address is in the sig Wink

btcnode

newbie

Activity: 39

Merit: 0

Bump. Help.. please?

2BTC to whoever solves my problem!

btcnode

newbie

Activity: 39

Merit: 0

Here's my bamt.conf

Code:

---
settings:
miner_id: bamt-miner

# loc is any additional string you wish to use to identify or group this rig

miner_loc: unspecified location

do_monitor: 0

gpu0:
disabled: 0

fan_speed: 30
kernel: phatk2
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=9
pool_file: /etc/bamt/pools
pool_timeout: 180
# GPU temp sensor reading (in C)
monitor_temp_lo: 45
monitor_temp_hi: 80

# GPU load (in %)
monitor_load_lo: 80

# average hashrate (in mh/s)
monitor_hash_lo: 125

# fam rpm (in rpm)
monitor_fan_lo: 2000

# effective reject rate (in % of total)
monitor_reject_hi: 2

gpu1:
disabled: 0

fan_speed: 30

kernel: phatk2
kernel_params: BFI_INT VECTORS FASTLOOP=false AGGRESSION=11

pool_file: /etc/bamt/pools
pool_timeout: 180

monitor_temp_lo: 45
monitor_temp_hi: 80
monitor_load_lo: 80
monitor_hash_lo: 125
monitor_fan_lo: 2000
monitor_reject_hi: 1

BAMT gives me the red background saying "Fault Detected on GPU 0" and GPU1. GPUMON is totally ineffective:

Code:

Temp Fan% (rpm) Load Rate Accept/Invalid Status
0: 33.5c+ 30% (2011-) 0% Mhs 0/0 Low Temp Low Load Low Mhs
1: 30.5c 30% (1993-) 0% Mhs 0/0 Low Temp Low Load Low Mhs

Total: 0 Mhash/s 0 accepted, 0 invalid

Time Total gpu0 gpu1
22:20:11 0.00 0.00 0.00
22:20:20 0.00 0.00 0.00

So what gives? What can I be doing wrong?

Topic: BAMT not working with 2 5850's (Read 1905 times)